Kia Optima, Sorento, Hyundai Sonata 2011-15 - Complete 2.4 L Engine Removal

Подписаться 40 тыс.

Просмотров 32 тыс.

50% 1

Kia Optima, Sorento, Hyundai Sonata 2011-15 - complete 2.4 L engine removal. Step-by-step.
❗️If you find this video helpful, I would appreciate a $uper Thanks that can be found below the video.
• Complete Subaru FB Eng...
• Subaru FB 2.5 L Engine...
• Piston & Connecting Ro...
• Cylinder Head Install ...
💰Save money on other vehicle maintenance and repairs :
• Top 3 Reasons Why Your...
• Pittsburg Harbor Freig...
• How To Remove A VERY S...
• Cheap Way To Check For...
• Brake Burning Smell? -...
• Brakes Still Dragging...
• Save Money And Learn H...
• Why Does My Car Batter...
• Car Misfiring? Running...
• Proper Way to Install ...
• Hot Tip: Use a Torch f...
• Remove a Broken Stud B...
• Oil Bearing Clearance ...
• Symptoms Of A Seized /...
• Piston Rings Replaceme...
• Cylinder Head Warpage ...
• Check and Change Your ...
• Seating Intake & Exhau...
• Replace Front Exhaust ...
• Better Throttle Respon...
⁉️QUESTIONS
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the
future.
#motorcarnut
⚠️Disclaimer:
The videos on Motorcarnut channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@1994gabrielperez Месяц назад

Great video man. I’ve been working on these engines for approximately 11 years now. Not only in cars but also in Clark forklifts as they have the 2.4l Kia/hyundai engine. And this video is spot on. Video pretty much consists of “a 10mm here and a 10mm there” lol😂😂😂

@Motorcarnut Месяц назад

Wow didn’t know they were in Clark forklifts too

@slowride4511 15 дней назад

Thank you for such a "straight to the point" video, very well done!

@Motorcarnut 15 дней назад

I appreciate that! Thank you!

@buddyboy4x44 8 месяцев назад

You do not do a job like this without a lot of experience and a lot of confidence. Kudos.

@Motorcarnut 8 месяцев назад

Thank you!

@SanGanjaAWD 6 месяцев назад

“You do not do a job like this without a lot of patience and some mechanical knowledge” There I fixed it for you…

@Jkreed2569 2 месяца назад

Thank you so much for this video!

@Motorcarnut 2 месяца назад

You are so welcome!

@ryandx6955 5 месяцев назад

Crazy you did this in 12 mins! I just got my optima back from Kia for warranty engine swap. Took them 3 months..

@Motorcarnut 5 месяцев назад

That’s crazy

@jerryp8990 4 месяца назад

Sorry. We just got a call today to come pick it up. Once they got approval, they had it replaced in a week. Total time, two weeks. Guess it depends on the dealer

@jerryp8990 4 месяца назад

@@kaylaortega3524 no we didn’t but we had all the receipts just in case. My wife being the original owner, 2013 with only 79,900 miles on it and she religiously took care of any recalls. We just picked it up today actually and alls good.

@ray8380 4 месяца назад

It took 12 mins to remove?

@charlieboy6885 2 месяца назад

Apparently you don’t know how editing works

@jairomoctezumasosa2905 4 месяца назад

Thanks for the video man, you make it looks very easy Do we need to program or calibrate something after engine replace if Im using a used engine?

@Motorcarnut 4 месяца назад

Thank you! No, should be good to go.

@shultzeye 2 месяца назад

Awesome video! I might swap out an engine on a Sorento with a blown 2.4L. This was really helpful. Can you please tell me what hanger bar you used to support the transmission?

@Motorcarnut 2 месяца назад

That one is from Harbor freight cost about $80 (2024)

@SHABOO516 3 месяца назад

good instructions here

@Motorcarnut 3 месяца назад

Glad it was helpful!

@nathanschnaidt1418 2 месяца назад

Good video

@Motorcarnut 2 месяца назад

Glad you enjoyed!

@Scalykams 5 месяцев назад

This is what we needed. Thanks

@Motorcarnut 5 месяцев назад

Sure, no problem thanks for the comment.

@bryansavage5472 Год назад

can you put a 2015 kia optima engine on a 2012 hyundai sonata swap?

@Motorcarnut Год назад

Yes, if they are both 2.0 but you may has some different sensors so would be good to swap intake manifolds as well.

@Jkreed2569 Месяц назад

Do you recall what size bolts for exhaust flange? I can't figure it out.

@Motorcarnut Месяц назад

Sorry, not off hand

@kevinwashburn9677 5 дней назад

The exhaust bolts on my 2013 Optima are 19mm. Just make sure you hit em with some Penetrating oil several times before cranking on them.

@AbbeyIsabella-yv2if 12 дней назад

would a 2019 kia optima 2.4 engine fit a 2015 hayundai santa fe sport 2.4

@Motorcarnut 12 дней назад

The block and heads would but not sure about intake manifolds

@AbbeyIsabella-yv2if 11 дней назад

can the intake be trasfered from the santa fe to the kia optima ?

@Motorcarnut 9 дней назад

@AbbeyIsabella-yv2if if it’s the same engine yes

@michaelmontoya7880 4 месяца назад

This is gonna be my first motor swapping my brother blew a head gasket and it dont sound good at all whats the main thing you struggled with? i do feel confident tho

@Motorcarnut 4 месяца назад

Rusty bolts, but take your time and work in clean and orderly way and mark things and take photos for reference and you’ll be fine.

@user-cv1so1tr7o 5 месяцев назад

Hi, I have a 2.4GDI 2016 Kia optima, I’m not sure whether I should take out the converter bolts out, can I pull out the engine without taking the 17mm bolts on the converter? Or would I have to take it out for the engine to slide out? Thanks

@Motorcarnut 5 месяцев назад

It probably can come out that way just make extra room for it to clear the converter.

@damianpasour 5 месяцев назад

We are actually fixing to swap one in a 2011 Kia optima these Kia and Hyundai are so common for engine problems they just ain’t the best engines in the world unfortunately

@Motorcarnut 5 месяцев назад

I know, I made many videos on them and the recall to get a new engine.

@user-el1ki3st7i 5 месяцев назад

would this be a very similar process to a Hyundai Santa FE 2017?

@Motorcarnut 5 месяцев назад

If it’s a 2.4 and not a 6 cylinder then yes

@MyrtleBeachbigwheel 3 месяца назад

Great video man! Where can I buy that jack that you’re using to lift up the engine and how much thank you

@Motorcarnut 3 месяца назад

Are you referring to the engine hoist or the engine support? Well either of the you can get at a decent cost at Harbor Freight. Just look them up on there site for prices.

@augustomejia 3 месяца назад

Thanks man I work on my cars when they break how difficult do you think it is for someone who hasn’t worked in engines jet, and what could go wrong about the car not running after replacing the engine as me as a newbie but after watching your video I’m feeling confident I know it is a lot of work

@Motorcarnut 3 месяца назад

@augustomejia not too bad just follow my video if you get stuck give me a holler!

@michaelduran8392 9 месяцев назад

kia GDi motor siezed up while driving. It will not crank. BUT if i remove the spark plugs out of the engine, the engine will crank just fine, no knock, no rattle, cranks about normal speed. I put the plugs back in and it will "not crank" it is stuck and if I keep trying the starter will burn out. why is this?

@Motorcarnut 9 месяцев назад

Probably because of the compression, hydro locked or mechanical obstruction.