Kingsong S20 / KS22 Eagle - DEEP DIVE - Best off-road EUC ever? 

Thanks so much and glad we could offer some useful advice 🙌

Yea,.going to be epic in may, got about 50 miles on the new knobby i put on my 16X. With the cold and the new tire i barely get 30 miles out of it.

Rogers' knowledge on most mechanical devices is in depth ,explained well were most people understand... euc are the new generation of transport so having good videos explained in detail is good for the industry.. well done Roger Chapman I agree sen zhan.....🤟🤟🤟 Plus he makes the best power pads ....🤙

Thanks! Whatever you need, just ask!! 🙌

Hey Sen.. you and your team did a great job with this wheel. Thank you... My only recommendations would be for the seat, which is not very sturdy, for seated riding. I would prefer if the lift back handle was always in the open position, and the seat extended on top of it, for more comfortable seated riding. The lift switch could be just a button on the inside of it. And also a small roll-cage to protect the oil canister of the suspension in the back. All in all, this is my favorite Wheel so far... i now ride the S18, but i plan to get the S20 in the future. Thanks again... Keep up the Great Work:)

@@Nautical33 thanks you like it

I think exactly the same!!!👏👏👏👍👌😅

Yes Tony! Not long now!! 🙌🙌

Thanks David, you are going to love it!! 🙌🙌

Thanks Richard 🙌

Thanks Brian 👍👍

No problem at all and thank you, we love reviewing the products! Just for info we have now hit over 50 miles range riding pretty hard and had just over 25% of battery left. 👍

Thank you 🙌

No problem, we love making them!!😀

Thanks so much 👍

He loves it really!! 😀😀

He is awesome! We will put it to the test and let you know! 👍

Thankd Basir, it really is!! 👍👍

Always quality from Luke, and thanks also to Tony for the 360 footage 🙌🙌

@@RIDEGLIDE you are the best 👍

Just done a medium/hard ride for 50 miles with 25% left! Seems to really depend on how steep the hills are 😀😀

Thanks so much, Roger is a great rider and as you can tell, LOVES talking about EUC's! 😀😀

@@RIDEGLIDE yeah he’s got the in’s and outs of the information, I’m always impressed with the S-20 when knowledgeable people speak on its behalf, can’t wait till mine comes, I have the S-18 right now, just took it on some jumps but I don’t push it hard because I’ve heard of cutouts but with the added torque/battery/motor/suspension/tire… so everything lol… it’s a good feeling being able to trust the wheel because sometimes when doing challenging activities that’s half the battle, not worrying then messing up because of that. Look forward to more content! Have a solid one!

Thanks 😀

They are awesome!! 🙌

What are the details of the fire? Was it a Gotway?

@@PaulA-pm3gx MSP High HT. Not sure, nothing left of either hallway or machine, have my ideas but nothing

@@HighOnScience Thanks.

@@PaulA-pm3gx Two weeks prior to the fire I hit the pedals at really low speed, had my one leg in the air about to step down. At that point the machine jerked violently and ended up with me on the ground smoking (the motherboard fried). I went and bought a new motherboard the next day, still smelling the smoke. Got the motherboard replaced, machine worked as always, still smoke smell emanating from it. Rode for two weeks and the smoke smell persisted, thought it could be the residue of the old motherboard I had seen inside after the swap. Two weeks later I 3D printed out a modified handle with an "umbrella" to cover the back. Morning after my roommate saw the new print and started pulling it out and pressing it in repeatedly. Less than 20 seconds later when he had walked into the toilet the machine burst out plumes of fire. Think one cell got cooked after the incident but that battery pack was not voltage tested and the repair was done in less than a day. Had a similar thing happen from a low speed impact on the Msuper S+ years ago. That thing popped the motherboard to but there was no smell. My theory is that the "umbrella" shaped 3D print and the repeated usage of the handle forced in air into the machine. The unseen damaged cell got oxygenated and finally stopped cooking and started to burn instead. Going to make a video later on showing some of the damage.

@@HighOnScience Thanks for writing such a detailed report. Will let others know about this. Look forward to watching the video when you are able to post it. Thank you very much.

Thanks bro 🙌🙌

Tire change is not gonna be easy on the S20.. no-matter if you lower or not the body... you still have to unscrew so many screws to get to the inside.

We haven't stripped it down yet and changed the tyre but we will and let you know! 👍

@@v4v777 if the wheel can slide along the rails by disconnecting the suspension then the only thing connecting the wheel would be the motor cable, no?

@@RIDEGLIDE thanks.

@@Curtish8892H I dont know.. we have to wait and see... even though i think there is a video about changing tire in the S20.. but i havent seen it.

Of course, come down and have a go!!

Thanks! Yes he is awesome, and what a place to ride 🙌

We are a retailer so get a demo unit earlier sometimes. We love reviewing all electric transport and EUCs are so much fun! 😀😀

@@RIDEGLIDE Oh okay, would make sense for you guy but other regular youtubers get these Wheels earlier too! Thanks for answering my question.

@@curtflirt2 Nobody gets it earlier.. jut retailers who then lend it to youtubers, and demo rides for people, to spread the word out.

@@v4v777 okay

@@curtflirt2 youtubers get the wheel to promote and review it. Reviews sell products.

🙌🙌

All the manufacturers do that. 125 miles! ***** If its 55 degrees Fahrenheit and you have a 100lbs rider and you're going 12 miles per hour on a glass smooth flat road ***