You prolly dont care but does anybody know of a tool to get back into an Instagram account? I somehow forgot the login password. I would appreciate any help you can give me.
@Alexis Kylo I really appreciate your reply. I got to the site through google and Im waiting for the hacking stuff atm. I see it takes a while so I will reply here later when my account password hopefully is recovered.
It's a shame you don't fit out vans anymore, I'm buying a Iveco H3 high top to covert. I'm really nervous about fitting it out myself. I'm even nervous if it should be a Iveco. If you have any recommendations I would be very grateful 👍
Hi I’ve been offered a panel van with the bulkhead behind cabin… do these have holes for 2nd row seats? The vans gorgeous, but I have 2 kids so need to add a 2nd row seat, any suggestions would be appreciated
Thanks for the video. I attempted this today but couldn't for the life of me get the handbrake casing off so had to do it with the drivers seat still in. I have just put the van back together but forgot to paint the metal 😢
@@kiravans5874 Yeah I couldn't manage to get it off, was chuffed with myself when I removed the passenger seat though! Will it matter if I don't paint the bare metal?
Is it strictly necessary to remove / grind down the remaining weld spots after removing the bottom ledge? These spots don't interfere actually as they will be below the ground plate / carpet. Is rust care on the remaining weld spots not sufficient without grinding them down? I am afraid damaging the ground metal plate when grinding the remaining weld spots further down.
i noticed where someone removed my bulkhead on the floor there is a small split in the hole where a grinder has gone too far or possibly a screwdriver size split , how far away is the fuel tank and if no rust what is best to fill the split ?
Hi, it should be fine. It won't have gone near your fuel tank and shouldn't cause any structural problems. The main concern would be rusting in the years ahead if it wasn't treated properly. You could fill it with body filler to block off the hole.
@@erhanabdullah2619 Just to confirm is your question relating to the seat? If so we don't supply the seats unfortunately so would not be able to make a recommendation on how to adjust the position of this.
I drilled out the first spot weld on the side bracket and went all the way through :( .. .. I used a grinder on all of the others as show in the vid.. The ones on the bottom bracket are larger than just spots, so you will need the grinder anyway