Hi Kirby Fans , if you Subscribe to my channel & turn bell notification on(which I’d really appreciate) it will let you know every time I upload so you don’t miss out 👍 LINKS: USA Valvoline High Temperature Grease amzn.to/3w8OxmU USA Neutral Drive N D Pedal Switch amzn.to/30kEJrg USA Bracket Lever For Neutral Drive amzn.to/30l9DzN USA Complete Transmission with Rear Wheels amzn.to/3fsZTrj DISCLAIMER: Links included in this description may be affiliate links. If you purchase a product or service with the links that i provide, i may receive a small commission. There is no additional charge to you! I appreciate the support for my channel so i can continue to provide you with free content.
You can never have enough Kirby knowledge, especially when it comes to protecting your investment. This channel is a MUST for any Kirby owner. Well done Kirby Enthusiast - keep up the excellent work.
Your video allowed me to replace the Tech Drive on my Ultimate G! By my 69 yo self (with some encouragement from my hubby). Such a great feeling of success...Thanks to you!
So glad I could help and congratulations on having the courage. Really appreciate awesome comment and your support of my free content with the $uper Thank$ . Thankyou sooo much . 👍👍
I wish your channel and these videos were around 10-11 years ago when I got my first ever used Kirby!! You have empowered me and so many others to do repairs/fixes/tuneups that once seemed impossible. I remember back then getting as far as peering with a torch through the gap where the handle clip is, and seeing a bunch of parts and wires and thinking nope looks way too complicated to take apart and fix I'll make it worse!! 😂 thus as the clicking got worse then the pedal fell out my G7 was sadly relegated to the lonely loft. But these days thanks to you, I've been able to strip my G7 and other newly acquired models , all the way down to its individual components. Then service all the part's successfully and have it back together working with hours! Thank you for all you do. With the way things are going in our throw away society, machines that can be fixed at home and videos like this are becoming more and more of a valuable gem. So glad stumbled across your videos randomly a few months ago!! All the best 👍
Thankyou , so glad my channel is finally reaching and helping more Kirby owners to save money and get the most out of their Kirby’s . Thanks again for awesome comment and support. Please share with family and friends so I can hit 10k subscribers to reach more owners across the globe .
@@KirbyEnthusiast thank you for replying, have shared your channel and subscribed to your others as you make great genuine content. And just so happens I've been a gamer for my whole life and also an avid barbecue person! Although I have to use the charcoal I'm a traditionalist lol, but awesome content all round 👍
Thank you so much for the video (and the many others as well), I've been having the most annoying intermittent transmission clicking noise with my Sentria 1 and Avalir 1, and I've completely ruled out the switch and the cam bracket, this video greatly helped me out with solving that mysterious clicking, it practically saved me from buying a new transmission.
Very informative video. I had a clicking sound when rolling the sentria in neutral. It was the first issue you described. I banged the little part back onto the spline and the problem was solved. Big thanks.
Your so welcome, plenty more repairs and tutorials coming up . Make sure to thumbs and ding the 🛎 not to miss new uploads. Thanks so much for supporting my channel.👍👍
Hi buddy, thank you for sharing this video. I really enjoy your enthusiasm about this wonderful machine. I really want to get my Kirby generation 3 running as it’s just catching dust and a quick service should get it up and running. I’m situated in South Asia but can have the machine shipped to the UK. Could you guide me a little more on how we can connect?
It will be the neutral drive lever . I think Kirby should replace these free of charge as they have known about this issue since the G5 and never addressed it . Thankyou for watching and support really appreciated 👍🛎
Just picked me up a ultimate G, Which is otherwise Wallace besides the tech drive clicking, so I’m going to hopefully fix it with just the switch. I have a question though, are there any specific types of grease that you recommend? And any certain types of lubricant/oils? For the vacuum and do you use it on every part or are there different greases and Oils/lubes for different parts of the vacuum. Awesome video as always, thank you for all the information and help all the time!
Thankyou for awesome comment and support really appreciated . i always put links in description and comments. 👍👍 Here is the link to what i use hope this helps amzn.to/3w8OxmU
Hope you get it sorted thsnkyou for watching and support. Check the bias on the rear of tech drive doesn’t need adjustment also the roller bearings ontop May need cleaning and regrease.👍🛎 not to miss new uploads 👍👍ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lt4DjSFbS6g.html
Hi, Love the video and I have now fixed the clicking noise - so great job!! Just have a question - where can I get kirby spare parts ( I want to change the tech-drive belt ). Any assistance would be apreciated.
Mine was clicking so I took it apart to clean it since I replaced my fan impeller. I need 1 ball bearing for that shaft. I thought I dropped it and I took a magnet to everywhere on the table, floor, and inside what was left of the vacuum frame. What size are those so I can find the correct one?
Hi my switch fell out so took apart no problem all the parts were in there loose including the washer! HOWEVER upon putting the part back on the spleen I put it on in wrong position then when trying to tap it back out I BROKE it right at the base...NOW, to my question....Do I have to order a complete lever to get that small part or is it available? I see no part # only part #16 which is the lever complete...did I screw myself and now have to buy a complete lever to fix?
The problem with my kirby avalir 1 with the tech drive is even when the tech drive pedal is on it still moves back and forth and I don't think it should be doing that so what's the fix for that if it's going back and forth when it's not supposed to be moving and also mine is very rusty on the inside
My Bad...Started before fully understanding what had to be done...LOL...so as usual the tuition will cost me a little. When you remove that part on the spleen (with the "T") it MUST go back on with the LINE lining up at 9 oclock with the D engaged...also it will not fit right if not aligned...I literally put it back on and tapped it down with a hammer THEN found out I had in wrong position...alas when I had to tap back out I used that part for leverage and broke it off at the base where it goes on. People if you do that as KE says you will HAVE to order a lever complete to get that part as it is not sold separately FORTUNATELY the entire lever with part is only a tad over 15 bucks and someone had that lever off countless times before me so the spleen bushings were very worn so i needed the lever anyway. Small price to pay for an education. KE, I saw on another utube where a guy took a saw and cut a notch in the spleen then put a "C" Clamp on the end so it wouldn;t back out again...What do you think about that fix?
Hi mate! I want to repair the Tech Drive of my Sentria G10E. The issue is that the clutches might be the problem and broken, dry or whatever. The belt to the Tech Drive seems okay and driving the transmission gear. Inside the Tech Drive the belt looks also good. But when I feel the surface of the clutches they are really slick. The springs seems also good. How can I fix my Tech Drive? Is there a way to "reactivate" the clutches?
Hi I did a step by step guide few wks back on how to maintain your tech drive . Should be one taking apart and part 2 re-grease and re-assemble . I recommend using grease as apposed to 3 in 1 oil . As the tech drive runs a lot smoother. Hope this helps . 👍👍
Any issues happy to help , I have replied to your other comment. Just incase you miss it here is link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lt4DjSFbS6g.html
Hi Deano, I have a G4 and just took the tech drive out. It all seems o.k. and still no joy, but if I put pressure on the plate either side them when I turn the plastic drive wheel the main wheels will turn, once I release the pressure I get nothing? Do I adjust the tiny pins on one side of the plate?
It's o.k. I might have another look at it another time, it's just strange it's not working as the elderly person who it belonged too only used it very rarely so it shouldn't be warn out. I'll let you know how I go on.
Only by watching your channel I've now become obsessed and bought - a Heritage, Heritage ll, heritage ll legend, legend ll and G4 so my collection is growing nicely while my space is getting smaller 🤣
IIf no green light the belt hasn’t been wound on the head before placing in machine .Ido have playlist on my channel, In this video demonstrates how to change belt and wind belt on and off . ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pIogt5Q-uZ0.html
Why is my kirby so loud in neutral?? When I'm using the hose attachment, I have to keep the transmission in Drive, but its annoying cause the vacuum keeps wanting to go backward
Your Kirby will seem louder when using the hose as , the fan runs at a higher speed to allow for suction length of hose . Having the tech drive on when using hose should make any difference to the noise level . The transmission should be in neutral when using hose . Hope this helps . If not you could record the difference and upload to the Kirby Enthusiast Facebook group . So I can investigate more . 👍🔔
@@KirbyEnthusiast I own 2 kirbys and my other one doesn't do this. I will record and upload. Ive been watching your vids (they're awesome btw - THANK YOU!!) But I'm not sure what direction to go for this issue. Im not afraid to dig into this as recently I changed out the transmission on one of my kirbys successfully 😎 Thanks for your help
I had 2 separate Lady Subscribers attempt this and they had never took a Kirby apart before and fixed it with ease . Which made me really proud that they are proving anyone can do the repair even if you have never taken on apart before .
@@KirbyEnthusiast I get that, but what's the point of saying "ladies", of pointing out their gender? It sounds like you're saying that women are dumb so if dumb women can do it, anyone can.
@Rose Thorn I didn’t mean it to come across that way my point was I have many female subscribers who are willing to take on a task proving that there is gender equality and they don’t have to rely on a man to do things. After 18months 3600 views from 42% male and 58% female your are the 1st viewer bring this up