Kirin Type-A: 300fps Bolt-Action Nerf Sniper Fun! 

Europe: From us 🙂Pre-order at the moment, inventory arriving this week!

Does the worker talon mag adaptor come with the blaster? If not where did you get the adaptor?

I just realized that's the root of the problem. Thank you for this wake up call! I kept blaming the mechanism seal and plunger tube seals. You're 100% on point!

Lefties are the demons of Babylon disguised under the veil of righteousness

I’m a rightie but I totally dig ambi blasters like this. 👍🏻

I was surprised the shell ejecting config was so consistent considering its basically shooting from one very short barrel into a longer barrel

I think tac gear is more of a personal preference thing, glad you liked the chrono testing.

Of course, there's not many people doing them so I always try to in every review

With enough of them and a net attachment I could make them serviceable, but magazines are definitely my preference!

@@BradleyPhillipsYT the right loadout and setup can get them very competitive, but it's definitely not without some trade offs like low capacity

Thought that was common knowledge lol

I doubt the metal plunger tube makes that much difference, if you want and fps boost I'd suggest trying Worker Bamboo darts

Next weekend, same time

Next weekend, same time

You could load them into the shells, but 50cal rubber balls are far less accurate and have less range.

The prime wasn't bad at all, I think the talon adapting kit was an afterthought that only came out recently which would explain the lack of promotion

I wonder if you installed the sled correctly, if it's not sitting in the channels properly it would be a very difficult prime indeed.

@@BradleyPhillipsYT just converted my kirin into worker talon mag accepting. And I found the priming of the 2.2 spring to be a bit easier compared to shell ejecting. Also I was able to deprime the blaster fine by pulling the trigger and the priming handle .

Next weekend, same time

@@BradleyPhillipsYT Can't wait! Love your videos, dude!

Do you find that you lose shells or that people step on and break the shells?

@@BradleyPhillipsYT Yes, both, although they don't get broken very often. Mostly they get mixed in with the unsorted darts and I have to go through and find all of them. I also had some weird issues with the injection molded shells that came with my Kirin so I only use my 3D printed ones.

Have you modded your Kirin?

@@0oDUBLINo0 I have a couple extra springs for it, but other than that no. I currently don't have a talon adapter for it either

@@legoboy-ox2kx right on. So you would recommend it then?

Saw in one of the comments 300 FPS or 2.2 spring seems to be overkill. Think I would be safer with the standard 2.0 spring that comes with the rifle. As the comment talked about breaking the plunger potentially.

Me to!

I use the aluminum plunger tube i bought extra, it works wonder with the high-powered spring, over 1000 shot now without any issues

It's not recommended to use the 2.2 spring with plastic parts of the shell ejecting kit. The talon adaptor kit uses aluminium parts.

⁠​⁠​⁠@@BradleyPhillipsYT Ah sure, but the talon kit doesnt come with an aluminium plunger though does it? So the plunger itself is still just plastic. From my understanding the plunger itself is what potentialy breaks with the heavier spring. For example frontlinefoam had their plunger snap after extended use of the heaviest spring. So if only the plungertube and pusher are aluminium that would mean the strongest spring would still be risky to use regardles of which plungertube you would use. Though i guess it might be *more* risky with all plastic? Edit: in case anyone else interested in this topic is reading this, I did some more research and: Frontlinefoam, who snapped their plungerhead in half by extended use at 300 fps, has designed a new 3d printed plungerhead which is supposed to be more sturdy. That seems to be the most important replacement when tuning this thing around 300fps.

It's the metal bolt arm and metal pusher. The plunger rod is still plastic on mine.

Mine came from Phantom Toys

Yeah I have one of those on the way soon

I couldn't get it to function aside from friction fitting the talon mags

@@BradleyPhillipsYT yeah that seems to be the go. Holds it solid enough anyway

Yeah I probably wouldn't have used it otherwise 😂

Should be the same performance as the plastic one. I'm not sure why they sent a metal one with mine if that's the case

@@BradleyPhillipsYT Shiny and sturdy. And shiny.

Video next weekend

Wait until you compare the price of the Harrier against the Talonclaw T4

I have a couple of scope related videos you might find interesting. Here's one of them: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CU0xwqxWLyk.html

@@BradleyPhillipsYT Cool! name of the scope you use on this Kirin!?

​@@youtuber-452 I used a red dot *sight on here called the HS506 from Holosun

You just pull the mag out like the original first talon mags

@@BradleyPhillipsYT Ahh, so it basically nullifies the mag release? Not quite a fan of that, just yanking it out :/

This was from a few weeks ago so I think the claymore would be if you are featured in next week's video about the Worker Harrier.

Harrier, pump action is far more practical

@@BradleyPhillipsYT Thanks, what if you used the side charging handle on the harrier instead of the pump grip?

Darts aren't that expensive, but it depends how many you would go through in a day.

@@BradleyPhillipsYT probably lose about 20 max?

​@@pulsar7980 however many you fire I'd estimate losing at least 10%

A couple of weeks usually

Ok thanks brad cause it’s been 2 months so I’ve just been wondering

​@@user-kx9eg1jt8g I'd guess it's probably been seized by customs then

Oh ok will I get the money back then?

And how long does it take for the money to be back in your card? Thanks

Video next weekend!

Yippee e

This is a Holosun HS506. But you could easily use a $20 red dot from eBay/Amazon/AliExpress

@@BradleyPhillipsYTthanks mate. just a quick question if you don’t mind I bought this blaster recently and opened it up to put in the 2.2 spring. It was way too hard to prime with one hand so I put the original spring back but it seems that the blaster has lost a lot of its original power with the same spring. Any ideas?

@@joshabcdefg1233 had the same problem, but somehow when I converted it to take talon mags the 2.2 spring priming became easy enough to prime with one hand

The metal parts like the bolt arm probably make it easier to prime

@@BradleyPhillipsYT any ideas about why it’s less powerful for me