Kitchen Cabinet End Panel | How to Make

Подписаться 34 тыс.

Просмотров 58 тыс.

50% 1

I needed to make a kitchen cabinet end panel for my basement renovation to cover up the end of the mini fridge. In this video I'll show you step by step how to make an end panel and all the tools and material needed to do so. I hope this video is helpful - enjoy!
📧 Join my Newsletter! - FREE Hardware Storage Cabinet Build Plans when you join! - doingwhateverweekly.beehiiv.c...
🛠 Want awesome TOOL DEALS delivered to your inbox daily? I've got you covered 👇dailytooldeals.beehiiv.com/su... (FREE gift when you subscribe!)
Tools and Materials:
Purchasing items via these affiliate links supports Doing Whatever at no extra cost to you. Thank you!
Tape Measure: amzn.to/2KUu55t
Miter Saw: amzn.to/2X20OIF
Impact Driver: amzn.to/3tDLeCA
Pocket Hole Jig: amzn.to/3qoLsKC
Pocket Hole Screws: amzn.to/3Clj05V
Wood Glue: amzn.to/3r1f83T
Brad Nailer: amzn.to/1rIsjos
Brad Nails: homedepot.sjv.io/a1YnJo
2'x4'x3/4" Plywood Handipanel: homedepot.sjv.io/MX1nBK
End Panel - Unfinished: homedepot.sjv.io/qnqDxy
Minwax Clear Polycrylic Semi-Gloss: amzn.to/3NNH3x5
Contact Cement: amzn.to/3aQVulw
1"x3" Maple Board: homedepot.sjv.io/doAKnK
4' Level: amzn.to/3MPD7dT
2 1/2" Screws: amzn.to/2FtCrsI
TOOLS:
🛠For a complete list of all the tools and materials I used in this video make sure to check out the project page -
Merch!
Doing Whatever Sweatshirt - amzn.to/3rF64ki
Doing Whatever T-shirt - amzn.to/3rF4dfd
Help grow your RU-vid channel - tubebuddy.com/freetrial?a=doi...
A tool I'm using to help grow my channel is called Tube Buddy and it helps me identify specific keywords that will help get my videos found on RU-vid. I've found it very helpful when brainstorming video title ideas and finding tags that are specific to my video.
If you're a small channel like I am, this is definitely a tool I'd recommend trying out to help kickstart your success on RU-vid - Try it free for 30 days!
tubebuddy.com/freetrial?a=doi...
🛠 The Tools I Use: doingwhatever.com/tools.html
📐+👕Project Plans and Doing Whatever Merch: doingwhatever.com/shop.html
🎥 My Camera Gear for Making RU-vid Videos: kit.co/DoingWhatever/youtube-...
🖥 My Computer Gear for Making RU-vid Videos: kit.co/DoingWhatever/desk-setup
📦I buy almost all of my project items and materials using Amazon Prime - you simply can't beat the 2-day delivery! If you want to give Prime a try, click this link for a FREE 30-day Amazon Prime trial. amzn.to/2T9rAfE
Music by: Joakim Karud / joakimkarud
Music: www.davidcuttermusic.com / @dcuttermusic
__________________________________________________________________________________
🖥Check out my website! - doingwhatever.com/
🖥Check out some of my downloadable plans:
Gumroad - gumroad.com/doingwhatever
Etsy - www.etsy.com/shop/DoingWhatev...
📱Follow me on Pinterest! - / doingwhatever
📱Follow me on Instagram! - / doingwhatev. .
📱Say Hi to me on Twitter! - / doingwhateverry

Хобби

Опубликовано:

11 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@allysonlleatherwood 10 месяцев назад

I was debating how to install a dishwasher end panel, and this seems like the logical option. Thank you!

@DoingWhatever 9 месяцев назад

No problem! good luck with the build!

@hilarief6590 Месяц назад

Thanks for a VERY well done project and clear/ concise video. This is exactly what I needed. Nice work and thank you!

@Benmeglei1 5 месяцев назад

Wow dude. I can’t belive you placed that panel over the contact cement so fast and flawlessly. I normally take my time with that cuz if it’s not aligned properly you aren’t undoing the binding. Nice job. Cheers.

@DoingWhatever 5 месяцев назад

lol I hear ya, I guess I got lucky on this panel! 😃

@annamuldoon6644 Год назад

Great, direct, easy instructions without a lot of filler. Thanks!

@DoingWhatever Год назад

Glad it was helpful! Thanks for the kind comment!

@SpiderEternal 9 месяцев назад

Thanks for giving me an idea of how this all looks. Never done it before and this helped a lot!

@DoingWhatever 9 месяцев назад

Glad I could help!

@prestonawood Год назад

Was looking for something simple and effective. This was exactly what I needed. Thank you!

@DoingWhatever Год назад

Awesome, glad it was helpful!

@ncsteinb Год назад

Thanks for the detailed explanation. Very helpful!

@DoingWhatever Год назад

Awesome, glad to hear that!

@christianjagot2162 Год назад

Great video! I even purchased some of the tools used through your links.

@DoingWhatever Год назад

Awesome, thank you! I really appreciate that!

@thegardenladyandmrgnome8002 2 года назад

Great video. Thank you.

@DoingWhatever 2 года назад

Thank you, I appreciate it!

@Babak.Abdehagh 3 месяца назад

Nice Job!👌

@dakotamizell5235 3 месяца назад

Just the video i needed!

@DoingWhatever Месяц назад

awesome, glad to hear that!

@gordonholland3406 Год назад

Hi! Great videos. I’m looking to do a similar cabinet/sink type bar in my basement and would love to see more about the rough in plumbing/cabinet build and install. Maybe during a future project…but you do a great job explaining and showing how to do things-your sink install video is great! Thanks, Gord

@DoingWhatever Год назад

Thank you so much, I really appreciate it!! I will keep those video ideas in mind for next time! For the rough in plumbing, I hired that out because I was behind schedule. The cabinets I bought unfinished at Home Depot and then stained and finished them to match the rest of the cabinets in the house. For installing them, especially the upper cabinets, it’s so much easier if you have blocking in the wall ahead of time. Then you don’t have to worry about finding a stud, just screw to the blocking and you’re good to go. I installed blocking when I was framing the walls and it saved so much time!

@KodakYuKnwDat 2 года назад

Just found your channel and I love your content! Your format of video and explanations are perfect 👍

@DoingWhatever 2 года назад

Wow I really appreciate the kind words 😃 thank you!

@halfdohm Год назад

Nice clean job.

@DoingWhatever Год назад

Thank you! Cheers!

@jamesroseboro2764 5 месяцев назад

Nicely done sir!

@DoingWhatever 5 месяцев назад

Thank you! Cheers!

@AbdulrahmanLehyani 2 года назад

love it !

@DoingWhatever 2 года назад

Thanks 😃

@mardakworkshop4450 2 года назад

well done 👍🏻👍🏻👍🏻

@DoingWhatever 2 года назад

Thank you!

@arinpounov369 3 месяца назад

The bottom corner doesn’t kick out? I usually place a small angle bracket (L-bracket) there but hate putting a screw into the floor.

@DoingWhatever 3 месяца назад

If you kick it, it moves a bit but not much. I didn’t want to put a screw in the floor either lol

@moomarkel Год назад

Think this is going to work as an end pannel for our dishwasher we just installed. We don't have a pocket hole jig though. We may need to use L brackets or something. 🤔

@DoingWhatever Год назад

I don't see why it wouldn't work for your dishwasher end panel 😃 L brackets would probably work fine - I have a link to the pocket hole jig in the description of the vide, I think it's about $18 if you decide to get one.

@jeffmilla4505 8 месяцев назад

Can I get with 1/2” plywood for cabinets?

@DoingWhatever 7 месяцев назад

1/2" would probably work as well. the cross members will help stabilize it also.

@dawnlifrieri8817 11 месяцев назад

did you have any issues with the fridge ventilation? Im thinking of doing this, however the "under counter" models are so much more expensive, but I'm worried about the fridge overheating in an enclosed location

@DoingWhatever 11 месяцев назад

I haven't had any issues with ventilation. there's about 4-5" of clearance at the back and then clearance on both sides so the fridge can "breath". Hope that helps!

@mingyuanxu2130 Год назад

Are the screws in the video recommended below? Seems to be silver

@DoingWhatever Год назад

The screws listed at the very bottom are the ones used to attach to the wall - I just added the silver screws (pocket hole screws) to the video description that I used in the pocket hole locations to connect the stretcher pieces. thanks for noticing that those were missing from the list 😃

@ydavis9449 Год назад

I’m trying to install a fridge that’s taller than my base cabinet. Would you mind telling me how to do so? Was thinking about adding wood under the base cabinet to make it a little higher.

@DoingWhatever Год назад

correct, you could raise the base cabinets up using a frame underneath them. you could make that out of 2x4s - probably the easiest way. you would end up with a taller toe kick, but it might not be the end of the world

@jckdnls9292 11 месяцев назад

When yiu get this as part of a kit, it comes with a tiny bracket to be installed on the front bottom, because there's no stabilization there

@ydavis9449 Год назад

Can you show us how to install the counters?

@DoingWhatever Год назад

I had the company that made our countertop install it since that was "included" with buying the countertop from them. Essentially, install the base cabinets and get those as level as possible (something else I should have filmed). once the base cabinets are installed, what they did was basically glue the countertop onto the base cabinets (using a construction adhesive in a caulk tube) and shim as needed. If I ever install a countertop in the future I will be sure to film it!