Kitchen Exhaust Cleaning Start to Finish - PART 2

Подписаться 31 тыс.

Просмотров 36 тыс.

50% 1

This is part 2 of 2 for our kitchen exhaust cleaning start to finish video. In part 2 you will see how to wash a hood, the fans on the roof, how to drain the grease water, and more. This is a full walk-through. Stay tuned to the end for before and after in the kitchen exhaust cleaning start to finish.
0:00 - Intro
0:23 - What is in the Van
3:52 - Cleaning the Fans
16:14 - Cleaning the Hood
24:02 - Siphoning the Water from the Trash Cans
28:24 - Taking Down Plastic, Taking Photos, Replacing Filters, Caulking, & Pilot Lights
30:17 - Close
30:53 Before & Afters
🧪Chemicals:
FS-502 = Green Beast
powerwash.com/shop/detergents...
FS-Booster = R-1400
powerwash.com/shop/detergents...
FS-100 = OD-100
powerwash.com/shop/detergents...
Stainless Steal Polish
powerwash.com/shop/detergents...
Chapin Pump
powerwash.com/shop/accessorie...
🎓 Hands-On Training:
powerwashacademy.com/events/
🎓 All Online Courses:
powerwashacademy.com/all-cour...
🎓 Become a Washaholic:
powerwashacademy.com/subscrip...
Got questions? We've got answers!
Reach out to us at info@powerwash.com or dial us up at 1(800)-433-2113. We're here to help you power through any washing challenge!
Check out our Websites:
PowerWash.com:👉🏼 tinyurl.com/mwvhvthx
PowerWashAcademy:👉🏼 tinyurl.com/yue8sd6a
🤙🏼FOLLOW US ON OUR SOCIALS
👉Facebook PowerWash.com: tinyurl.com/2s3a42tw
👉Tiktok PowerWash.com: tinyurl.com/y9mhpp7p
👉Instagram: tinyurl.com/yzbjfcb4
🤙🏼FOLLOW POWERWASH ACADEMY ON SOCIALS
👉Facebook PowerWash Academy: tinyurl.com/ycxnxyue
👉TikTok PowerWash Academy: tinyurl.com/4jxnpt36
👉 Instagram PowerWash Academy: tinyurl.com/27w6ehf9
👉RU-vid PowerWash Academy: tinyurl.com/yckfwcve
Subscribe and Join the power washing community to be the hero of your next cleaning adventure! 💪🌟

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 204

@pressurewashingandhoodcleaning Год назад

very detailed video.give this man a round of aplause and a rise.

@wademccuistion2170 4 месяца назад

Another very good job explaining. Well done. I'm learning.

@Powerwash 3 месяца назад

Glad to help!

@md.mahamudurzaman8961 Год назад

Great job!

@larryhoughton4090 11 месяцев назад

Learning a lot keep up the good work.

@michaelbuchanan1611 2 года назад

I appreciate the pride you take in the work as well. Great job

@Powerwash 2 года назад

Thank you!

@swervsplatt9672 Год назад

It's great to see. Just got fired from my restaurant job, after I cleaned their hood by hand for 14 an hour. Fire protection guy was in last week; said he had twelve restaurants, 600 apiece. So now I'm looking into getting certified. Already have a truck. 🤞

@audreyandstephen Год назад

Thank You Kindly for all of your knowledge very detailed and professional. I am truly excited to start my new endeavors with this field.

@revh7478 2 года назад

That was a really good informative video, Thank you sir!!!

@Powerwash 2 года назад

Glad it was helpful!

@titodendy1301 Год назад

I had to opportunity to train with Dustin. He is an excellent guy to train with. Thanks Dustin!

@TRAN_S Год назад

Impeccable quality and care put into this clean.

@degreaseLLC 11 месяцев назад

I have a few issues with this cleaning as well and I am curious what your issues were. I take so many clients from this company! This process and the method of downstreaming in general only works for one out of maybe 10 hoods.

@TexasWatchman 4 месяца назад

Great video.

@johnnewby2043 9 месяцев назад

Wonderful videos! Thank you so much!

@Powerwash 9 месяцев назад

Yes Sir!! Glad we were here to help. Please give us call for products and supplies

@thuta83 Год назад

You're taking upmost level of pride in your work bro. You just earned my respect.

@Powerwash Год назад

Thank You. We try hard to be very thorough and professional.

@armandoconejo 2 месяца назад

Amazing video thanks

@jobond3317 11 месяцев назад

Wow so professional. I take care and pride in your work. It's a fascinating video. I never wondered how industrial kitchens clean hoods. But you don't just clean you check and understand what you are dealing with.

@jeffkrie8310 Год назад

I decided to look into this process while I have a crew hitting three of my stores tonight. Much respect to your craft, and somebody better give this guy a raise!!

@Powerwash Год назад

Thank You Jeff

@chefconor94 Год назад

I've been working in kitchens for over 10 years. So help me God, the rag and mopstick is an amazing idea for cleaning the back wall behind the equipment!!!

@michaelbuchanan1611 2 года назад

I love your videos. Very thorough and informative. Excellent for any new hire to watch a few times over.

@Powerwash 2 года назад

Thank you! We appreciate the words of encouragement.

@tombouchard1980 Год назад

What chemicals do u use for heavy carbon

@ismaelthekingofthebrisket7661 Год назад

Great job

@ismaelthekingofthebrisket7661 Год назад

Where can i get tha gun

@JamesJones-rx5mn Месяц назад

Man you are awesome! I love how you work with passion and your attention to detail! I’m just starting fresh in this business, and I aspire to be like you my guy! Keep inspiring, and making your money! Blessings to you

@user-ss8rb4pf9z 11 месяцев назад

عمل احترافي و جيد جدا☺️

@hotdoggravy 7 месяцев назад

Using a phone to take pictures of areas you can't see is a good idea,I've done it myself a bunch of times

@imtiyazrisaldar3211 Год назад

Thank s sir from India

@Powerwash Год назад

Wow!! Thank you for commenting. So glad we can help those in your country

@JuanMartinez-rc8st 19 дней назад

Wow the day you open a school please let know because I will send my employees to learn from you. Thank you for everything you do to educated the industry you are the best.

@Powerwash 18 дней назад

we have a School its PowerwashAcademy.com check it out

@mattmatthew2377 Год назад

I do hood cleaning I have always used sodium hydroxide and Sheila shine do you know how the degreaser and shine you use compares to that and also is the shine oil or water based

@McClaryJD 5 месяцев назад

This was insanely helpful! I work as an HV/AC technician, but haven't got any experience cleaning vents and hoods. Asian grease, like you said, seems to require SERIOUS strength chemicals, and I've seen lack of maintenance burn out motors repeatedly.

@Powerwash 5 месяцев назад

Glad we could help

@GoldenState408 Год назад

BEAST

@joonasaine Год назад

He's so cute 😂 a great teacher

@Powerwash Год назад

Thanks!

@jayn391 Год назад

I buy my chemicals from hoodfitter n it works but I been wanting to go with something stronger for those heavy jobs. Glad I decided to check your vids out.

@Powerwash Год назад

Take a look at our Green Beast powerwash.com/shop/detergents/kitchen-exhaust/v502-green-beast-kitchen-grease-cleaner-degreaser-2-lbs/

@zacharyspurlin3224 10 месяцев назад

We use caustic chloride

@BryanExhaustTools 2 года назад

These are great kitchen exhaust cleaning videos, would love to see a first service with some scraping. Dustin is a real professional, if he ever wants to move out to LA tell him to give us a call.

@Powerwash 2 года назад

I am so glad to hear! Thank you for the kind words. He is very good at what he does. We are very lucky to get to work with him.

@Henry-nr7ll Год назад

I was curious, is it possible to have a one man crew and do this work by yourself?

@BryanExhaustTools Год назад

@@Henry-nr7ll It has been done but it is not easy

@carlosmelgar3320 Год назад

@@Henry-nr7ll I’ve done it it’s very possible specially if there’s only one hood and fan and it’s not to dirty

@superiorhoodcleaning Год назад

@@Henry-nr7ll yes but it gets old fast!

@RightOnJonCrane Год назад

Great videos! 🙌 You did such a good job of explaining every step. Nice job. I’m still curious how the chemical comes out of the gun with one tip and not the other?

@Powerwash Год назад

It has to do with the venturi effect and the pressure difference between the tips allowing the soap to come through or not. It is much more complex than this but this is a simplification of it.

@pressurewashingandhoodcleaning Год назад

where did you get the wand you spray with?

@MrUnkownGuyAC 3 месяца назад

draining with a pre-filled hose is a smart trick - avoids having to suction with mouth!

@user-nx9ug6gq7q 4 месяца назад

Whatever they pay you, its not enough brotha. Great video! Just bought your asian grease solution, been looking for something tougher than super doug

@Powerwash 4 месяца назад

Thank You. We are here to help

@paulperez5617 Год назад

Great video! Ive been approached by a restaurant owner on cleaning there vents i was just wondering do you need permits,certificate s for inspection through the state? Just wondering since you put a sticker up.

@icookfood5680 Год назад

It's important to get good at what you do

@jaywar6347 Год назад

What about the riser air ducts how will you clean it?

@benpeters5623 2 года назад

Great vids! Hey what's the go with the rags on the back of the hood? Is that where you've pegged the plastic and the rags are to stop is ripping or something?

@Powerwash 2 года назад

Thank you! The rags are there to jam the plastic so it doesn't fall during the washing process. It acts like a wedge. The rags are also good for protecting the plastic from the putty knife when he is jamming the plastic.

@dariuskittle007 5 месяцев назад

Looking on the page to find some equipment and I see the set up in the van. What pressure washer do you have in the van ?

@scottruch674 11 месяцев назад

Hey bro where you get the mop sticks from ,i cant find them on the website?

@peanutfamily8556 6 месяцев назад

how are the lights fine while you guys shooting the water ? even they are waterproof light ..?

@ulimach24 Год назад

Bro where can I get the magnetic scraper to clean the duct ?

@Makomo_xd4 11 месяцев назад

what is the model of hot power washer you used?

@pressurewashingandhoodcleaning Год назад

how long does it take you to clean a hood on average?

@pressurewashingandhoodcleaning Год назад

how many pressure guns do you use?

@crazyjsthename4298 5 месяцев назад

I run a fire protection business where we do suppression systems and we are getting ready to jump into cleaning hoods, what is the recommended pressure washer on yalls website.

@pressurewashingandhoodcleaning Год назад

what psi is your pressure washer?

@WinterWalken Год назад

Another helpful video. One question though. If you caulk the gap afterwards doesn't that make it difficult to put your plastic in on the next cleaning?

@Powerwash Год назад

It can

@pressurewashingandhoodcleaning Год назад

what size is that wand

@MrCiancasey Год назад

Hi great job. Can you tell me what psi washer is needed.

@Powerwash Год назад

We normally run 4000 PSI at 4 GPM, hot water

@jeremykronk7069 5 месяцев назад

What do you charge to do a full system like this. Hoods fans ducts

@slbcsapsu1 3 месяца назад

Which pressure washer are you using? I think that everything else is linked. Is there a smaller pressure washer you would recommend for someone just getting started?

@pressurewashingandhoodcleaning Год назад

what psi do you use bro?

@pressurewashingandhoodcleaning Год назад

how long do you let the chemical sit for?

@chriswinslow6389 Год назад

Great vid guys. Do you ever get complaints about the noise working so late?

@Powerwash Год назад

It does happen occasionally

@Pitjefe_bbq Год назад

@6:28 the NFPA requires that all upblast exhaust fans must have a access panel,in order to reach backside of blades. Good way to sell it to the customer Just a FYI

@Powerwash Год назад

Yes Sir!! Thanks for sharing the tip

@user-kf4wr2uu6v 2 года назад

What pressure washer of GPM do you need to clean those types of fans and does the electric pressure washer will work? Those two parts already made me a certificate professional, Thank you very much.

@Powerwash 2 года назад

I would not go more than 5.5 GPM. Glad you enjoyed the video!

@floridaaplusqualitycleanin315 Год назад

Where can i get this gun/the longer one you have and the rrest of the stuff you been using like longer hoses ect.

@Powerwash Год назад

All these products can be found at Powerwash.com!

@funkysgames Год назад

do you clean the filters or is that the customer's job? BTW. I really appreciate what you do man. It has been super super helpful

@Powerwash Год назад

We encourage the customer to clean filter daily or at least once a week. Other wise the filter will to function properly.

@superiorhoodcleaning Год назад

So I see you guys don't put 4" fan blade access in the bowl. 2 reasons. 1: "how you spray the back side of the blade"Get the back side from the 4" access. 2: 5 gallon bucket to catch run off, dump down duct so it's not going on roof!

@franciscoesterripa7912 Год назад

how much cost a service like that?

@jayn391 Год назад

Do you have a link for that angle adaptor?

@Powerwash Год назад

Please give us a call at 1-800-433-2113

@blademanization Год назад

What state are you guys located at?

@vaisakh4860 Год назад

Which equipment to use if there is no access to clean with normal cleaning machines

@rbbb7208 2 года назад

What do you do with all the grease/water in the trash can after you finish?

@Powerwash 2 года назад

We usually pour it down a floor drain or the mop sink. Ask management first if they have grease traps for their drains. Most restaurants do, and see they have a preference where they want the water to go.

@foodhope7313 Год назад

Is the baffle filter cleaned as well?

@Powerwash Год назад

The restaurant staff should be cleaning them daily, every couple days or once a week based on the grease accumulation. This should not wait until the kitchen exhaust cleaning service is performed.

@jonathannieves4226 Год назад

Where can I find that 45' tip?

@Powerwash Год назад

PowerWash.com

@jorgeportillo3508 Год назад

Can you tell me which is the powder one that works very good too please thank looking the one you use is liquid

@jorgeportillo3508 Год назад

I mean the chemicals you use

@Powerwash Год назад

Green Beast, V-502. Here is a link powerwash.com/shop/v502-green-beast-kitchen-grease-cleaner-degreaser-2-lbs/

@cjhoodcleaning7218 Год назад

I cannot find the fs 502 in your website. I want to buy some

@Powerwash Год назад

Here is a link to an equivalent product powerwash.com/shop/detergents/kitchen-exhaust/v502-green-beast-kitchen-grease-cleaner-degreaser-2-lbs/

@210propressurewashing7 Год назад

donde puedo conseguir el magnetic scraper ?

@pressurewashingandhoodcleaning Год назад

lo puedes conseguir en driploc

@eltiburon5240 Год назад

Do you guys wash the dirty rags to reuse after a job?

@Powerwash Год назад

Yes we do

@user-sj4li6qi8b Год назад

So, why do you skip cleaning the filters or is that on a routine basis?

@Powerwash Год назад

Customers are responsible for cleaning the filters no less than once a week.

@jairoarias4071 Год назад

hello, what is the price of the service you do in this video.

@Powerwash Год назад

It varies but on average it goes from $500 to $1500 a location

@tomasperez8142 2 года назад

NFPA 96 is the only certification you need to do this work?

@Powerwash 2 года назад

Technically you do not need a Phil Ackland Certification to do this work but it helps with the learning curve and credibility. It is like having your truck worked on by a guy who knows cars vs a mechanic that has his ASE Master Truck Technician Certification. Although both might be qualified to do the job, it gives the clients a little more peace of mind knowing you have been certified by a credible third party outside yourself.

@AAron-ky9tq 5 месяцев назад

Hello sir i just started this line of work. Lets say the customer already has caulking between back of hood back wall. Do i use tape if there is no tuck points or do i tear out the cauking and make my own tuck points? Replacing the caulking after cleaning of course.

@Powerwash 5 месяцев назад

Congratulations! It's great to hear that you've decided to start his line of work! In this case, if there are no tuck points, you can use heavy-duty magnets! We sell some on our website powerwash.com/shop/griploc-magnets-with-basket-8-sets/

@Powerwash 5 месяцев назад

And if you want to learn all the tips and tricks for kitchen exhaust cleaning we recommend taking this course from PowerWash Academy: powerwashacademy.com/events/kitchen-exhaust-cleaning-boot-camp-4/?

@AAron-ky9tq 5 месяцев назад

Thank you I appreciate it. I'll order some today

@calogic9051 Месяц назад

How much did you charge for this whole job?

@Mr_mrs_arana Год назад

Good afternoon, I recently got certified to clean commercial hoods and I wanted to know if it really takes more then one person to do the job. I have a contract already pressure washing and these hoods are typically small, more of the fast food restaurants. (Southern Cali) Thank you 🙏🏽

@Powerwash Год назад

Who certified you? Learning how to do the cleaning is very important

@Mr_mrs_arana 4 месяца назад

Good evening! Sorry I never noticed you had messaged me but I got my certification through MFS in Florida and I’m actually working now for a company called HOODZ and I’m learning alot with my trainer which he’s very meticulous with his work. I’m taking a lot of pictures of my work and just figuring out how to present myself to new potential customers. Thank you 🙏🏽

@user-cz2lx6rc6m 11 месяцев назад

Where can you go and get license to clean kitchen hoods

@Powerwash 11 месяцев назад

PowerWash Academy does training and offers Phil Ackland Certification here is a phone number (877) 798-6722 and link powerwashacademy.com/events/

@UrrALegend Год назад

I would love to see how fs-100 works on Asian grease

@Powerwash Год назад

We definitely want to do a video in a Asian food restaurant soon!

@Powerwash Год назад

Take a look at OD-100 it is specifically formulated for Asian grease powerwash.com/shop/detergents/kitchen-exhaust/od-100-asian-kitchen-grease-fighter-16-oz/

@JohnDoe-bq8oo Год назад

They always show the easy jobs. Try showing one with excessive sticky grease buildup.

@JohnDoe-pt7ih 2 года назад

Does the filters not get cleane? Or the wall?

@Aawsomeguy 2 года назад

In the restaurant's that I have worked in the hood filters got pressure washed with a degreaser solution.

@Powerwash 2 года назад

Great Question! It all depends on what was agreed upon with the customer. Usually we do not clean the filters and deal solely with the exhaust fans, hoods, and ducts.

@axeyplayz1052 3 месяца назад

How would I get certified or licensed and is that a thing ??

@Powerwash Месяц назад

Power Wash Academy offers a Kitchen Exhaust Course with hands on experience! Here is the link to check it out powerwashacademy.com/events/

@DJJs635 Год назад

The only thing is, I’m having trouble with pricing. How would y’all price single hoods and fans to two or three hoods and fans?

@Powerwash Год назад

It varies. Most systems like that will take 2 to 4 hours depending on kitchen volume and the type of grease. Decide what you need to make per hour to be profitable per hour then multiply that by the number hours it will take to do the job. That will give you the price you need to charge.

@58567 6 месяцев назад

@powerwash can you please make a video on pricing as this would help a bunch! 🙏

@oscarbautista5181 2 года назад

Does one need to be licensed to do this and how consistent is it to get jobs ?

@Powerwash 2 года назад

Great question! You technically do not need to get licensed, but this line of work has a lot of liabilities at a higher risk. Without the proper training, you could be putting yourself at risk. Getting certified will help with your credibility when bidding for jobs because it shows the client that you know what you are doing because your certification is through a credible source. We do the Phil Ackland certification at PowerWash Academy if you are considering getting certified. The number is 877-798-6722

@oscarbautista5181 2 года назад

@@Powerwash thank you. I’ve worked for a hood exhaust cleaning company so I understand the job, never understood how to be allowed legally to perform such jobs as I understand there’s codes that should be followed to certify the cleaning to nfpa standards. Will look into it. Thank you.

@blakeengland7784 Год назад

How is he able to change from chemicals to water on that wand? Also, when is heat used?

@bnagnew34 Год назад

The downstream injector that sucks chemical from the bucket only works when the back pressure is lowered enough to activate it. By switching to the black "soap" tip on the gun, it has a bigger orifice, which in turn lowers the pressure and allows the downstream injector to pull chemical.

@blakeengland7784 Год назад

@@bnagnew34 nah brother I use a downstream injector with a dual lance and can control it. He is using 2 separate soaps/acids on the same gun without going to the rig. Either high pressure soap or something.

@bnagnew34 Год назад

@@blakeengland7784 He said he's mixing the two in a bucket and drawing from the bucket. What you are saying could be done though if you had say a dual barb injector with remote shutoff valves running separately to each barb. You'd just have to have two separate remotes. I've never tried it that way so I don't know what kind of mix percentage you'd actually end up with, but in theory you could do it.

@NicoNico-te2tk 10 месяцев назад

Put your goggles on man!!

@whizzkid6427 10 месяцев назад

You guys don’t have hood cleaning training in your website?

@Powerwash 10 месяцев назад

We do have an online wood cleaning course, check it out: powerwashacademy.com/courses/wood-cleaning-and-restoration/

@whizzkid6427 10 месяцев назад

@@Powerwash Commercial Kitchen Hood Exhaust Cleaning course 👍

@Powerwash 10 месяцев назад

@@whizzkid6427 I have no idea how I read that wrong. Here is the link to the Commercial Kitchen Exhaust Cleaning Course powerwashacademy.com/events/kitchen-exhaust-cleaning-boot-camp/?

@pressurewashingandhoodcleaning Год назад

why people gets mad when you charge 600 dollars for a good quality job like this?

@Powerwash Год назад

They don't understand what it takes to do the job right.

@rotocleanservices5153 21 час назад

@@Powerwashis that about what this job would cost? If not, can you give me an idea please? Great video!

@usmanbajwa2889 7 месяцев назад

You didn’t show any scrubbing or scrapping. Is it mainly spraying the chemical, leaving it on and spraying it off and if it’s still dirty repeat? You showed magnetic scrappers but didn’t use them in this video.

@Powerwash 7 месяцев назад

I depends on the amount of grease in the system. Scraping is recommended for heavy accumulations.

@olitube123 Год назад

Watch that asian grease y'all, it's uh sticky. 😂

@Powerwash Год назад

yes it is

@DJJs635 Год назад

Y’all need jrods

@NicoNico-te2tk 10 месяцев назад

What do you charge for a job like that

@Powerwash 5 месяцев назад

Job Prices vary! We now offer a FREE way to learn how to price any job! Check it out here powerwashacademy.com/courses/pricing-101/

@stevenmccown4650 Год назад

This is all old school cleaning & I'm so glad that I've figured out a different way of cleaning , I use no machine & no harsh chemicals, and I only need plastic to cover up the deep fryer unit only ! I've been cleaning Hoods now for 20 years !