KITCHEN SINK WASTE - How To Install Step by Step 

*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts Plus, follow my *Vlog “TimesWithJames”:* ru-vid.com

Thanks for this 💙 I’ve lived alone in a rental for 6 years and just removed and cleaned all my existing waste pipe work to fix the funky smell coming from under the sink/ washing machine, easy fix! Why no one shows you these things in school, I’ll never understand 🤷‍♀️

Thankyou, just installed mine. First time. Well chuffed with myself. Girl power! 😀

What a god send! 13 years later i realise what a joke job i did in my kitchen,. You have given me my confidence back. It's actually much easier that I made it! Thank you!!!!!

Hope you enjoy guys! Had a ball fitting this beast, although one of my camera's went a bit crazy on the focus, and I had a tiny solder run on an elbow....and I can't remember why....but hey that's life!

I agree - fitting the overflow is always a pain so if I'm fitting a new sink I fit the wastes and the overflow before dropping it into the hole in the worktop. Same for the tap if its fitted into the sink not the worktop. Had a tap last week which came with solid tails - so much more difficult to connect than flexis

I only needed to see the bit where the bolt was dropped in place to dismantle the waste and clean a leaking seal. Job's a goodun! This is what RU-vid was made for. Thanks, mate!

I must say. This is a spectacular video. You've demonstrated each step very well. Too bad I'm in the US, and none of our parts are the same. Equally unfortunate, your parts seem more effective than mine!

ive a drip round the outlet sink rubber washer so thanks, i will go get a big screwdriver and see if I can nip it up from above. just what I was looking for james.

Hope you enjoy guys! Be great if you could follow me on Instagram here👉 www.plumberparts.co.uk/social.php?social=Instagram THANKS! ❤️

I'm completely useless with any DIY around the house, this video though has given me confidence to give my broken kitchen sink a go. Cheers geezer!

nice job! I always put plumber mate and especially silicone underneath just to make sure to not receive a call from the client after few days for a leak....

I’m confronted with exactly that box dilemma and so happy I stumbled upon your video. Informative and hilarious... so many videos about diy can be such a drain!

Thank you so much. Great tutorial. I'm gonna do it!!

Nice job. Very clear and useful. We have a 35 year older Franke double which is always blocking up so I’m going to rip all the waste out and start again.

Please consider subscribing - Uploading still today! *Please Follow my Vlog, TimesWithJames* ru-vid.com *PLUMBERPARTS AMAZON TOOL SHOP* www.amazon.co.uk/shop/plumberparts

Absolutely brilliant! You made something that looks a nightmare into something which is doable: Many thanks!

You are a brilliant instructor.

Good video, entertaining, informative & easy listening. Well worth following.

Awesome just replaced old sink. Everything went well. Finished but not connected as waste outlet is in the corner of the cupboard. Think I need a flexible waste hose extension to finish off. Great advice here. Thanks.

That has a to be the neatest piping I have ever seen.

You are my plumbing guru, honestly...

Ever time spot on master plumber like it when someone does a great job none of that will do .

James, as always, wonderful job! you saved so much space in the cupboard, and didn't use any quick-flex drain hoses, all ridgid and nicely fastened pipe. What more could you ask. . .

really helpful from a self build point of view. good job.

yet another informative and easy to follow video , thank you

I usually toss that waste stuff away use a tee piece and two traps ... one trap a spigot type 👍👍

A link to those pipe cutters you use bud would be nice.

Thanks for the advice, worked a treat 👌

Total legend.. I had a panic attack when I opened my under sink box lol. Very helpful 👌

i'm here because I was hoping to see you fit a air-vent, of sorts attached to the waste U bend pipe like mine, ( which is leaking) couldn't buy a new valve , so blocked it off, but water slow to drain away now, and makes loud gurgling sound, as Air is blocked .Nothing else attached, just two taps and one waste pipe with U bend What to do?

Ahhhh - tools on top of a brand new worktop!

Awesome video - thanks, had to connect up my new sink & tap (plumbers called weren't interested apparently?) - used the same ssk2 kit you used and your method worked a treat. If I re-doing it I might tweak it a bit to get the pipes further back but as it is it's all water tight and I've got loads of room in the cupboard as the pipework is pushed nicely back.

You didn't mention how to plumb the waste pipe into an outside drain. Good video though!, I enjoyed watching it!

Thank you plumberparts;]

@plumberparts I guess you don’t need to use Plumbers Mait on a modern sink waste system like that? I want to replace the sink basket/waste/plug hole on my Kitchen sink as it appears it’s not stainless steel like the sink was. Th chrome has come off and worried it’s going rusty. It’s only a bog standard kitchen sink. Just want it to look nice and newish. (Can’t afford a brand new kitchen).

That is neat. Brilliant job.

Very useful, thanks you :-) wondering what is the third copper pipe on the right for, is it a water filter?

My kitchen has a double Belfast style sink and has the same pipework, but after a short time the stench from the waste was revolting, because the dirt builds up in the horizontal cross piece and any time hot water went down the plug hole the smell was unbearable and the only way to clean it was to dismantle it, so I put a U bend onto each sink before the cross piece, problem solved.

Top class video. You’re not wrong about different wastes! Cannot find a replacement popup waste that fits my sink for love nor money. They all seem too deep, most of them with outlet going down - mine comes out horizontally :( Any advice appreciated, can send a pic.

I have the same fitting which have just started leaking but do not where to buy the same outlet piece with overflow Thank you for the help that should let me have a go at replacing.Please advise

Thank you

Great video, followed well, the problem I have where you had a dish washer in, I have a washing machine instead, now when this drain it makes a right racket when draining, what can I do, when I put the plugs down in the sink, the sound goes, cheers

Very helpful, cheers.

You make it look so easy!

4:06, funniest thing, eva?

Thanks that was really helpful and entertaining 😁 new subscriber 👍🏻

Another helpful video, can you do a Belfast sink sometime these seem to have a deeper outlet with combined waste which makes the screw/bolt too short how do you get around this please.

Very help full thanks

I’ve got wast trap copper but no rubber on the top wast what goes into sink hole? Do I need anything for it it’s a granite sink be the way?

1:50 On my sink the top bit is the basket strainer type and there is no rubber seal between that and the upper sink surface. There is one between the lower facing sink surface and the waste housing, so it should be water tight. The installer used a sealing compound for the upper surface but I would like to replace it with a washer but I can't get one, and my enquiries were answered by a reassurance that a rubber washer isn't needed. DO you have any advice about that?

Very helpful, Thanks very much

You are the most amazing plumber and trainer ever! 🥳 Funny, clear, perfectly done and crazy! Awesomely rad! Luff it! My new online BFF!! Hahaha! ‘Satisfaction everybody!’ 👍🏼🤟🏼👀👅

Absolutely legend thank you 🙏🏻

Great job I am only confused by the fact your still using copper for got an cold supply I am only surprised because I thought all you guys did plastic everywhere now.for me personally copper every time .

Just found this. Guess what I'm doing today. Tyvm.

Hi please help how do you replace the wast pipe that goes directly out of the main wall to drains (the outside part is leaking)

Anyone know how to stop the gurgling sound when the washing machine or dishwasher is emptying? Can't find an air admittance valve that will fit into one of the spare spaces on top of the manifold....

Lol at the guy trapped on the roof @27secs. He's probably not stuck but it amuses me to think he was.

Great video, thanks.

How wide is the screwdriver blade for the kitchen waste bolt? Where to get it?

So does the washing machine attach to the middle top or the side of the manifold?

you say "absolute legend" but your subtitles say "poopsie knitted". Nicely done sir

Hi i like watching ur video and you do encourage me for completing my 2years course NVQ plumbing and am nearly in the end I need to start doing some work experience what advice can you help me with and what sort of companies I should contact thx

Hi new to your channel and omg its awesome, how do I find out what size of kitchen sink plug trap and waste like what you fitted on this job?

What ratchet pipe cutter is that you're using ? I've got a 40mm Rothenburger slice type but with those you have to have the right size for the pipe you're cutting. A ratchet one would be useful.

loved the video james.

Does the dishwasher waste slack affect the drainage from the dishwasher? Would it damage the pump by popping an extension on the dishwasher waste?

Hi. Can you please give me a link to where I can get the exact same blanking caps as you use on this video

Did no one teach you to put towels down on the worktops before you whack your tools down! Cmon J

My trap is at a 45 degree angle to fit in the gap and line up with the outside feed from where the old sink was higher up. So the water level sits just above the waste and slightly in one of the pipes that come horizontal under the main sink. Just wondering if I can leave this or should I drill more holes through the wall to run it vertically?

Can you make a video for the single kitchen sink please? Thank you

Can somebody tell me what the blue thing under the sink is please?

Do you know where I can get a like that with manifold etc?

Anyone know what make/model that mixer tap is? Thanks

Dont you have double bowl connectors or combination traps in the uk? Manifolds seem like overkill for a sink.

Top job mate, but I’m about to fit my kitchen but have a two draw and 1 1/2 bowl🤔

What make was that sink waste kit please. Can’t find it anywhere.

what was that blue thing? pump, filter?

Hi, do you still check new comments? I got a replacement McAlpine waste unit and know how it should be installed but it seems shorter than the old one and the pipe struggles to reach it. If I secure everything there's still a bit of water dripping through, but it seems to come from where the waste secures to the pipe below. The old waste measures 60mm from top to bottom while the new one is 50mm (no seller seems to mention this when listing measurements so I can't find a longer replacement) and it was installed with a strange ribbed, almost funnel shaped rubber gasket between it and the sink bottom, which I have to use with the new one or it won't allow the pipe nut to screw on at all. Presumably this was used to bridge the gap because the right length of pipe wasn't installed at first, but it's not enough for the new waste and I'm not sure what to do. I can't remove the screw from the old one because it was corroded and had snapped. I only noticed this because I ran the hot tap before washing up and heard dripping under the sink, as the grate had popped up and the waste had moved down from the sink base. I couldn't dig the screw out to reuse the waste as pliers snapped the rest of it 😔

I connected everything corrected but my water is not draining, any idea what went wrong?

Could you come over and fix our plumbing system please?? Our 5 storey house has leaks everywhere... Exactly like the film “The Money Pit” lol 😋

My sink keeps gurgling. Do I just replace the pipes? Xx

its a lot easier to put most of it on before you fit the sink but please be very careful of those sharp edges under the sink

can set up a mini golf set with all them extra pieces

Legend 👏

What height did you first fix the waste?

Love ur videos 👌🏾👌🏾

James where would I get the best info from I am building a extension to my house I have a back boiler & I am looking to put in a pressurised system I also have Pv panels which I would like to connect to my cylinder I was talking to some1 in a shop he was just trying to sell me a direct cylinder from his business but I want a indirect cylinder if any ideas or some1 I could talk to would be great thanks ps love the videos

Island sinks over a block and beam floor. Thats what I want to see

What screws did you use to go straight into the wall?

Love your videos, I know this question is relative to this video but I saw your Magnaclean video and I want to fit one. The problem I have is my filo and return are piped in from the top. I can't put it under the boiler. Where else can I put it? I'm holding tight for your answer. Thank you

I how are you venting the kitchen sink stack?

I test for leaks the same way but I add dye or UV dye, that way it's easier to spot where leaks are coming from

Hi Did you drive a screw straight into the breeze block just then? or was it editing magic? If you did, please tell me all about them .

Where did you buy the was trap? Screwfix dont sell that. ))

Hi James, What were the fixings used into the block wall?

got anything on Microbore heating systems ?

Crikey.... such a hansom devil. ____________ Oh! 🤔 Five years ago.... boy, you've let yourself go.................. 🤣

Nice