TOP 5 Klein Screwdrivers - Does Your Favorite Make the List? #tools #klein #top5 #electrical

NEW Klein 11-1 RATCHETING Impact Screwdriver 32500HDRT - 1st Ratcheting 11-1? #tools #klein #review

СЕРБСКАЯ ЛЕДИ ПРЕВРАТИЛА ПАРНЯ В ЗОМБИ!

СКУФ ИЛИ НЕ СКУФ? #иванабрамов #натальнаякарта #юмор #shorts

100 ДНЕЙ НА ЗАБРОШЕННОМ МОСТУ В МАЙНКРАФТ!

Лукашенко оценил честность руководителя! (Архив) #лукашенко #беларусь #новости #политика #президент

Klein Tools 11-1 IMPACT Screwdriver - It's What Else You Can Do With The Screwdriver that Matters!

MORGAN'S Maintenance

Подписаться 19 тыс.

Просмотров 59 тыс.

50% 1

Видео Поделиться Скачать Добавить в

Just picked up the NEW 11-1 Impact Screwdriver from Klein Tools. Part # 32500HDR. I review the tool, plus share something interesting you can do with the Screwdriver Handle and one other piece.
Hope it is useful and THANKS FOR WATCHING!
The following marked (Affiliate Link) are Amazon Affiliate Links for items shown in the video. I make a small commission if you make a purchase through following these links. Thanks for supporting the channel!
If you would like a link for something you see in the video, just let me know and I will post them here.
Klein 11-1 Impact (Affiliate Link) - amzn.to/3YkPNAW
Klein 11-1 Impact (Home Depot Non Affiliate Link) - www.homedepot.com/p/Klein-Too...
Klein 11-1 Magnetic (Affiliate Link) - amzn.to/3hPclZV
Klein Flip Socket (Affiliate Link) - amzn.to/3hO9oJ4
My Review for it here... (My First Review) - • Klein Tools 7 in 1 Fli...
Klein 8-1 HVAC (Affiliate Link) - amzn.to/3jet2hC
Klein Flip Socket 3" Bit (Affiliate Link) - amzn.to/3Vhxaeg
Dewalt Bit Holder (Affiliate Link) - amzn.to/3Vhxrhi
Malco 1/4 & 5/16 Bit (Affiliate Link) - amzn.to/3BVIaXG
00:00 Intro
02:01 Overview of the Tool
06:01 The Game Changer & Outro
#tools #maintenance #kleintools #electrical #plumbing #carpentry #screwdriver #newtool #newtools

Опубликовано:

1 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 210

@Bacnow Год назад

I started watching the video then paused it half-way through, got dressed, drove to HomeDepot, found it, bought it then retuned home to resume watching the video! This is exactly what i was looking for in a screwdriver!

@MORGANSMaintenance Год назад

I really like mine so far… probably the most useful 11-1 from Klein in my opinion. I can use as is, or set up for specific jobs with other bits making my own flip screwdriver. Hope you like it 👍

@mozzberg590 Год назад

I don't need to watch the video (but I will). This tool is absolutely worth every penny if you're an electrician (or HVAC). I use it every day.

@MORGANSMaintenance Год назад

You may want to watch and see what my “game changer” is… 😂 I just found this this week… didn’t know it was a thing.

@mozzberg590 Год назад

@@MORGANSMaintenance there's actually 3 versions of this tool from Klein. All 3 solve multiple problems with this style of multi driver.

@MORGANSMaintenance Год назад

@@mozzberg590 I’ve always liked these screwdrivers for pocket carry, in a house drawer, small loadout, etc… lot a bang for space

@THETIMINATORTHETOOLMAN Год назад

That’s pretty darn awesome!!

@MORGANSMaintenance Год назад

@@THETIMINATORTHETOOLMAN Yeah as soon as I saw the pieces in the picture my mind went straight to “can I make my own flip screwdriver with that” Still a really good screwdriver as is… better than the standard 11-1 just for the fact that you can put it in the impact.

@carsonrowe8948 2 месяца назад

I can’t believe you figured this out dude. That’s awesome.

@MORGANSMaintenance 2 месяца назад

This has been my favorite 11-1 so far from Klein mainly because of that piece. Nice to build your own screwdriver

@jaydoherty8402 Год назад

That’s really cool. I feel like the one knock against Klein’s old 11-in-1 was always “oh but you have to use their proprietary bits.” It’s cool how they kind of addressed that with this design.

@MORGANSMaintenance Год назад

Yeah, I honestly wouldn't mind less bits and just having all the sleeves take whatever dedicated bit you want to put in. You would only have 4 bits, but sometimes it becomes a hassle remembering which bit you need to flip to get to the one you want. Or maybe do two double ended that are slotted and phillips in one sleeve (for the majority), and the other sleeve be two single bits of whatever you want...

@chrisfyfe9212 Год назад

@@MORGANSMaintenance My concern is fragility of the handle , historically I’ve had Klein handles fracture when dropped . Basically , why I went over to the Whia 11 in 1 . I try to avoid dropping , but Chit happens

@MORGANSMaintenance Год назад

@@chrisfyfe9212 yeah my 11-1 type screwdrivers have held up well from Klein… the regular bit holding type have held up good enough that I get enough use for the price… but they don’t open like they do out of the package after a few months of work.

@daveonezero6258 Год назад

Ugh tell me about it. I lost one of the holders and now its lost a lot of function.

@MORGANSMaintenance Год назад

@@daveonezero6258 yeah it stinks when you loose a piece of a multifunctional tool. Most of the time you can’t just buy one piece.

@curtisyue182 Год назад

Love this design. Simple, compact, impact rated. Doesn't get any better than that!

@MORGANSMaintenance Год назад

Yeah it’s the best version I’ve seen of the 11-1 yet… time will tell if it holds up as well, you would think so with it being impact rated. I love the fact that I can take the handle and that piece if I’m on a job that takes two specific things, there is a chance I can make my own specialty flip screwdriver. Appreciated your thoughts on it 👍

@rodsheypuk8104 Год назад

Klein knocked it out of the park with this one! I believe it's a Home Depot exclusive. I wasn't aware of it until I saw your first short video on it a few days ago. I ran down to my local Home Depot the next day and snatched one up. Thank you!

@MORGANSMaintenance Год назад

Glad you got one… my store had nada. It’s a great upgrade to their normal 11-1 in my opinion. Thanks for watching 👍

@mechanicalpirate664 6 месяцев назад

Used one recently for large residential heatpump installation worked well and super convenient

@MORGANSMaintenance 6 месяцев назад

It’s probably my favorite 11-1 so far. Really good options, I leave a 1/4 & 5/16 malco in one end most of the time.

@doublezmtnman Год назад

Klein his hit it out of the park with this line of drivers. I have been using these in HVAC maintenance for several years and they just keep getting better and better

@MORGANSMaintenance Год назад

I agree, been using them for years… This one is pretty good so far. Used quite a bit since I got it. It’s breaking in and not so tight to swap stuff around. Thanks for watching and sharing your thoughts 👍

@chrisfyfe9212 Год назад

On my list , both for backup , and also for my EDC bag ! Good to see Klein stepping up their game !

@MORGANSMaintenance Год назад

I personally feel it’s the best 11-1 yet from Klein

@chrisfyfe9212 Год назад

@@MORGANSMaintenance I tend to agree with you ! A lot of power in a small package !

@MORGANSMaintenance Год назад

@@chrisfyfe9212 👍

@chrisfyfe9212 Год назад

I just got mine , very impressed !

@MORGANSMaintenance Год назад

I really like it so far… no complaints from me. 👍

@thriftstorelumberjack Год назад

I kept seeing this pop up and didn't really look into it in depth, I appreciate you sharing this cause I've gotta get one now!

@MORGANSMaintenance Год назад

You are welcome… lots of upgrades to the typical 11-1. Now they really need to just work on magnetism somehow, I know lots of people will want that built in.

@timc8913 Год назад

Received one of these this week from a friend who’s relative works at Klein and was involved with the patent for this particular screwdriver. Excited to start putting it to use. Looks like a good one. 👏

@MORGANSMaintenance Год назад

I think for the price… it would be my go to of the 11 in 1’s

@MORGANSMaintenance Год назад

Maybe I can become a “friend of a friend” and get in on some of these releases too 🤔

@motif5775 Год назад

Great product, awesome review! Thank you! I just ordered one.

@MORGANSMaintenance Год назад

I think it’s pretty neat… one of the best 11-1 options I’ve seen

@projectpinehills Год назад

Nice that this 11-in-1 is a less proprietary design! Great video, great channel, thanks for the overview!

@MORGANSMaintenance Год назад

Thank You. Appreciate that, really enjoyed your as well 👍👍

@billdake3932 Год назад

I used the old school 11 in 1 for years, but had to replace it when I used the 5/16" nut driver with any leverage because that section ended up splaying out ever-so slightly and it wouldn't go back in the receiver. I've been using the Lenox for the last couple years without a hitch. Definitely like the design of this one. Local Home Depot says they have 14 in stock. Ordering one in 5...4...3...

@MORGANSMaintenance Год назад

Hopefully they have it. I tried in store (none), order online for in-store pickup (got a call that they cancelled), ordered online for ship to home… finally got it 3 days later. My Home Depot’s inventory online verses actual is never right though.. yours may be better. Hope you get one 👍

@marshallgreenbank1051 Год назад

I just bought this thing today. Thanks for the tips

@MORGANSMaintenance Год назад

You are welcome. I think it’s one of their best 11-1 options yet

@monkeyman8265 11 месяцев назад

I’m eyeing up that thermos back there that is so cool.

@MORGANSMaintenance 11 месяцев назад

Yeah I get a lot of comments about that. It was a promotional item, I ended up getting mine of EBay.

@Hazan1fan Год назад

Home Depot should pay you commission. I just ordered one

@MORGANSMaintenance Год назад

It would be nice. I tried signing up for their affiliate stuff awhile back and they kept denying me. That’s alright.. I will “pretty woman” them one day 😂

@davidmorris2549 Год назад

I plan to pick this up asap!

@MORGANSMaintenance Год назад

If you like 11-1’s I think it’s a good one at first glance… everyone I’ve showed it to in person has said, “I’m going to get one”

@ianbanas2737 Год назад

Great video. This is a must have for me

@MORGANSMaintenance Год назад

I’m really liking mine so far. Best version of an 11-1 I’ve had yet. 👍

@Mr1MOA Год назад

This is exactly what I was looking for, great info!!

@MORGANSMaintenance Год назад

Appreciate that… thanks for watching and taking the time to comment 👍

@michaelosmon Год назад

Havent seen this yet. Thanks I'll be buying it today

@MORGANSMaintenance Год назад

I think it’s pretty good… nice upgrade from their original 11-1’s Appreciate you watching and commenting 👍

@jimbrown9885 Год назад

Very well done, Klein!

@MORGANSMaintenance Год назад

Yeah the concept of this one is pretty nice… and the rest of my 11-1’s have held up really well, can’t imagine this one won’t either. Thanks for watching 👍

@masonperry87 8 месяцев назад

Been using it for a couple months. Huge fan, it’s great to have a whole box of impact bits on your belt. Wish it wasn’t so sloppy though. I use those Malco drivers extensively, I may have to swap one into a side.

@MORGANSMaintenance 8 месяцев назад

That’s what I do. I run a 1/4 & 5/16 Malco and then the 3/8 Klein Side. I really like it too 👍👍

@enriquediaz7547 Год назад

Cool ideas!

@MORGANSMaintenance Год назад

Appreciate that 👍

@lilcourtny08 Год назад

Don't need but might buy it, have always bought Milwaukee 11-1 screwdrivers.

@MORGANSMaintenance Год назад

Never had a Milwaukee 11-1… this one has some nice features that make it more useful than my previous ones, but there are also other individual tools/bits I have that let me do most of those things. It’s just nice to have it all in one tool. Thanks for watching and commenting 👍

@rago8115 Год назад

thanks for the video. I saw a similar klein at a hvac supply house and they informed they stop selling it because they had too many returns. they have problem with the magnets falling off. I do own the maco set and works good. just a warning

@MORGANSMaintenance Год назад

That was probably the flip socket screwdriver. I heard that issue with the magnets from a few people. I personally haven’t had any issue with mine yet, but I still use Malco bits a lot too. Thanks for the heads up 👍

@ronfry5851 Год назад

I think I'm loving it

@MORGANSMaintenance Год назад

I think it’s the best 11-1 on paper I’ve had… time will tell in durability. Surely with it being impact rated it will be. Thanks for commenting 👍

@thebackwoodsmechanic5029 Год назад

These are tools absolutely worth buying. I drove 2 hours to buy some tools and be damned if mine got gone shortly afterwards

@MORGANSMaintenance Год назад

You mean they got stolen… or others you know saw them and wanted them so bad they took them from you?

@anthonysuau5437 9 месяцев назад

wish it somehow had magnets though, I love this 11-1.

@MORGANSMaintenance 9 месяцев назад

Yeah I use magnetic nut drivers much more often than hollow ones… I throw a malco in 1/2 this screwdriver pretty often when I use it.

@markkempton4579 Год назад

Thanks for the review and insight at the end. I was drawn to the 11-in-1 MAG b/c my dad had one of the reversible shaft multibits in the 70s/80s when I was growing up and I felt some nostalgia toward it. (Nothing proprietary that I can see about that style btw.) But this is a pretty cool idea and I like the flexibility you demonstrated here. I'm adding it to my shopping list. BTW, Klein makes double-ended ECX bits - I checked before buying my 11-in-1. It's actually the standard single ECX bits that I can't find easily. My 14-in-1 has an ECX2, but not a 1. The only short ones I've found are the Milwaukee Shockwave ones.

@MORGANSMaintenance Год назад

Yeah same here. I buy a small Milwaukee set of bits that has them in it… they are the only ones I have found so far as well. Klein is the same for me. Nearly every old screwdriver I have is Klein, and they are what I remember as a kid. This 11-1 is a little different than the rest and I find it to be the most useful so far… but the other ones as a screwdriver work just as well. This one is just set up knowing most people carry an impact/drill these days. The being able to make your own screwdriver is what I think is great. Appreciate you watching and your thoughts.

@Environmenthrall Год назад

Great walkthrough 👍

@MORGANSMaintenance Год назад

Thank you, I really appreciate that 👍

@Environmenthrall Год назад

@@MORGANSMaintenance it convinced me to pick one up tomorrow 😆

@MORGANSMaintenance Год назад

@@Environmenthrall you tell Home Depot to send me a check 😂 I think you will like it. If you like 11-1 type screwdrivers already, there is nothing to “not like” about this one.

@georgeferlazzo7936 Год назад

Hello Morgan's Maintenance I just found your channel and subscribed. Thank you for giving me another option!

@MORGANSMaintenance Год назад

I really appreciate that so much. You are welcome, thank you for finding me 😂

@nmancini Год назад

Slowly catching up on a bunch of your videos since recently finding your channel

@MORGANSMaintenance Год назад

I appreciate that… don’t watch too many in one day… you will get sick of watching me 😂

@Divici02623 Год назад

Thanks for the comparison, it’s hard to keep up with all the different multis. I use the 7-1 flip socket with the husky 12-1 multi ratcheting screwdriver. Nice thermos btw

@MORGANSMaintenance Год назад

Your welcome.. More people compliment my Thermos than anything else I have ever bought 😂 This one is pretty good in my opinion. One of there better 11-1 options so far.

@Divici02623 Год назад

@@MORGANSMaintenance it’s a pretty awesome thermos lol

@coreysimm Год назад

My Home Depot says they have newly released Klein tools in stock but I go there and can't find them. Someone I know who works there told me about an area where new tools are stored until they get around to putting them out. She dug through it and got me a new tool I wanted once before it made it to the shelf. Another tactic I use is to order it online to pickup in the store which forces them to go get it down to fulfill my order.

@MORGANSMaintenance Год назад

That was nice of her, at my store you wouldn't get that service. (with the exception of a few of them) I actually tried the pick up in store before shipping to my house. The guy called me an hour later and said they didn't have that one but they had the magnetic one (in the video) that was basically the same thing if I wanted it. I told them to just cancel and I would ship it to my house. The inventory online at my Depot verses what is in the store is always messed up.

@glennsepelak5113 Год назад

Great vid, HVAC/R guy here

@MORGANSMaintenance Год назад

Appreciate it. I use this with a bit driver and a 1/4 & 5/16 Malco quite often.

@parts7959 Год назад

I just bought the 11 in 1 magnetic the other day, now I gotta get this. I’ve got a running list of things to buy because of you 🤣

@MORGANSMaintenance Год назад

I’m hated by wives everywhere 😂😂

@parts7959 Год назад

@@MORGANSMaintenance showing in stock at my local depot so I think I’ll head there tomorrow and get me 1. Stay warm my friend 🍺

@MORGANSMaintenance Год назад

@@parts7959 I hope your Home Depot’s inventory is better than mine… unless they say they have 200 of something, I always think “they probably don’t have it” 😂 Stay warm too buddy. Supposed to be like -20 with the windchill here the next 2 days, not above freezing till next week. You may be used to that… not me.

@parts7959 Год назад

@@MORGANSMaintenance yes dangerously cold. 🥶 and then by next Friday supposed to be 50

@MORGANSMaintenance Год назад

@@parts7959 I'm not working in it (or not planning to) so I should be good... just hoping we don't lose power.

@omegaanimations8549 Год назад

This is like the multi driver 5 in 1 / 6 in 1 bit that Klein made awhile back but looks like it’ll work better now, the old bits would fall out if you torqued on them at all.

@MORGANSMaintenance Год назад

I never bought that one. I bought the Dewalt version called the Flip and Switch. It wasn’t meant to be impact rated but it would do the same thing. The bits typically stayed in the fasteners. Hopefully this one holds up better… time will tell. We won’t know till we test it for a little while.

@davidbetancourt9041 Год назад

Great channel bro! Catching up on ur videos! The game changer exist from a non brand! Ebay

@MORGANSMaintenance Год назад

Appreciate it. What is the tool called on EBay?

@davidbetancourt9041 Год назад

Hope its this one! Let me know what u think pls

@MORGANSMaintenance Год назад

@@davidbetancourt9041 yeah that one would work in your impact as long as you have a double ended bit. The bonus for the Klein is that you can put in in the Screwdriver handle or your impact… But That one could be useful for drilling and driving though. It also made me realize that a double ended bit in my Klein makes it more useful too. Appreciate the suggestion 👍👍

@914Rocky Год назад

Great video and really cool tool.

@MORGANSMaintenance Год назад

Appreciate that. I think it’s pretty cool too.. really great new option for an 11-1

@914Rocky Год назад

@@MORGANSMaintenance Have you checked out the Trucker's Friend? It's a demo/emergency tool that is available on Amazon. It's US made and has a lifetime guarantee. I leave it in my car and have used it a surprising number of times. It's great for demo work and for doing all sorts of things when camping. It's a solid pry bar. The axe head was pretty dull when I got it, but after a few minutes with a file, it's super sharp.

@MORGANSMaintenance Год назад

@@914Rocky I haven’t seen it.. I will give it a look. Appreciate it 👍

@asmautollc Год назад

One found its way into my shopping cart before the end of this video.

@MORGANSMaintenance Год назад

👍. If you like 11-1 type screwdrivers… I think you will like this one

@rjskum688 Год назад

I own one. My only wish is they had a t 25 double sided bit with it. It's handy as all get out other wise.

@MORGANSMaintenance Год назад

Yeah I run into so many random Torx bits it’s always hard to have the “right one” on you. I catch many T10,15,20, & 25.

@chrisfyfe9212 Год назад

Interesting !

@MORGANSMaintenance Год назад

I think so too!

@choccolocco Год назад

I live my 7 in 1, couple it with a small bit set, and it’s perfect for the vehicle. The only drivers I like better are my Dotties.

@MORGANSMaintenance Год назад

I haven’t used any Dotties. Will do some reading up on… thanks 👍

@MrMcbeardson Год назад

Wasn't real interested until you showed the little trick with the Malco flip driver, might be worth a shot. Thanks for the heads up

@MORGANSMaintenance Год назад

Yeah that was what intrigued me too. It is a screwdriver handle I can leave as is… but also empty it out and build specific screwdrivers for repetitive tasks. I probably won’t put the double ended bits in the impact for heavy use… just weird light stuff when in a pinch. Much easier to find replacements of regular bits and drivers for heavy work than the pieces out of this screwdriver. Appreciate you watching 👍

@JoshMurphyD Год назад

I was completely out and figured hey, let me at least check out the “Game Changer”. I didn’t even finish the video before I ordered one.

@MORGANSMaintenance Год назад

@@JoshMurphyD 😂. Glad you stuck around.

@jontnoneya3404 11 месяцев назад

Dude - check this out: You can buy the Klein 14-in-1 Adjustable Length driver (part #32303) OR (the HVAC one is 32304) which has screw driver bits in the handle THEN swap out it's adjustable length stem for the impact sockets from the 7-in-1 (part #32900) And you've got 2 tools in 1 handle!! You can even by the sockets alone (part #32907) if you want to save a little money

@MORGANSMaintenance 11 месяцев назад

Yeah I run that screwdriver that way sometimes. One of my first videos was about the Klein Super-screwdriver. It is a great all in one when you go into places that you don’t want to carry many tools (crawlspaces, attics). Appreciate the suggestion 👍👍

@migueltorres79 Год назад

Sold..... what a fantastic video. New subscriber here

@MORGANSMaintenance Год назад

I think is a really good version of the 11-1… time will tell on how it hold up. Being able to build my own flip screwdriver for specific jobs is what sold me. Thanks for watching and subscribing 👍

@migueltorres79 Год назад

@@MORGANSMaintenance You're building your own flip screwdriver thing is the one that got me I just bought a whole bunch of clientools for Christmas and also do tool review videos on dewalt and Milwaukee as well on my channel

@MORGANSMaintenance Год назад

@@migueltorres79 that’s awesome, I’ll have to check those out 👍

@mikebelperio2579 Год назад

Milwaukee also has that

@MORGANSMaintenance Год назад

Not sure I’ve seen it… do you have a model #. I’d like to check it out.

@MKIVGTIVR6 Год назад

Picked this up today for my EDC kit and it seems great. Holy crap was there a lot of oil on it though!

@MORGANSMaintenance Год назад

Yeah mine did too.. I even wiped it off before the video and there was still a bunch 😂

@rod_on_demand1523 7 месяцев назад

I purchase one today & you are absolutely right 😂

@randomstuff3672 Год назад

I'd buy it today if those reversible sockets were available in metric sizes.

@MORGANSMaintenance Год назад

Yeah I hear that from a lot of people on many tools… I’m really surprised more companies don’t offer in both… people would buy them.

@Skwish6952 Год назад

I like it

@MORGANSMaintenance Год назад

Yeah, if you like 11-1 screwdrivers… this is the most feature packed one I’ve had. Thanks for watching 👍

@JohnnyUmphress 3 месяца назад

I don't know why Klein doesn't include a Pozidriv bit set in their multidrivers. Most of the terminal strips and contactors are using Pozidriv screws.

@MORGANSMaintenance 3 месяца назад

They at least give you one spot on this one to add any bit you want. You can pick up some double sided bits that work, but I’m not sure I’ve seen a Pozidrive set

@jls1952 Год назад

cool, if you use a double sided bit in one end you can use it in a drill with that middle section, but is that joint in the middle impact rated?

@MORGANSMaintenance Год назад

Yeah I’m not sure if it is, it’s the same color but it may not be. I guess you could do that to make your bit longer but to be safe I would just remove my bit/bit holder from that piece and put it in my impact.

@brianhall9019 Год назад

Maybe this will end up being your Super Screwdriver.

@MORGANSMaintenance Год назад

It’s definitely the best 11-1 version (at first glance) I have seen. As a screwdriver It will surely hold up as well with it being impact rated, but time will tell on how well the bits and things hold up in your impact. I typically won’t use these types of bits in my impact for heavy use/torque, more in a pinch. If I’m doing heavy repetitive work I will put in a more easily replaced bit and bit driver in my impacts… but it is nice to be able to do it with this when you need it, or smaller tasks. Not as many nut driver sizes as the flip socket and not being magnetic hurts it a little… but it does have the 3 main sizes I use. With the options of swapping things out… there are enough slots to for sure build a screwdriver with the bits you use most. I’ll be doing a lot of trial and error with different combos over the next few weeks but really the nice thing about it is the handle and that piece. I can leave it as is, or I can swap stuff around and build a screwdriver for every job with whatever works best.

@brianhall9019 Год назад

Lol…I know you will. I too have always strived to find the perfect screwdriver. I’m headed to HD this morning to pick it up. I like that the handle is smaller than the nut driver impact. By the way my wife really doesn’t like me watching your channel, because I’ve acquired even more tools since I’ve been following you.😂

@MORGANSMaintenance Год назад

@@brianhall9019 yeah I get that on here and real life… wives would rather their husband hang out with their old high school girlfriend than me 😂

@geteducatedbyTed Год назад

I wish one of these multi tool screwdrivers came with ECX bits

@MORGANSMaintenance Год назад

I believe Milwaukee’s does… not 100% sure but 97.6%… I bought me some of these to put in mine.. amzn.to/3iwPfrf Says they aren’t available right now but I think Home Depot may ship them too. You are right though… I am surprised Klein doesn’t put it in from the get go since they are more geared towards Electricians.

@geteducatedbyTed Год назад

@@MORGANSMaintenance Thanks for the reply.

@MORGANSMaintenance Год назад

@@geteducatedbyTed 👍

@Stefan_Kawalec Год назад

Although I do not trust that multi-element tools, it looks interesting. Sort of a trivia. Here in Poland in the 80s most of the screwdrivers that had plastic handles (there were quite many tools with wooden handles too) were made out of that yellow, translucent material. And they were usually very low quality. And even to this day tools with that type of handle are not associated with high quality.

@MORGANSMaintenance Год назад

I normally have not had any problems with any Klein Screwdrivers. Some of their bit holing ones (The one I use for Super Screwdriver, The Ratcheting Screwdriver with similar style) have not been real great over time. Not horrible, but not great. They are all mostly "newer" tools... so my hope is it's not a trend towards the future. But their 11-1 type like this and just dedicated screwdrivers, I normally use the handles until the bits wear out. I have some old 11-1 handles laying around the house that are pretty old. (They are missing some bits) I would like WERA to have something like this with Laser Engraved bits... or just laser sell engraved bits. The screwdrivers I have with those tips... the tips can't be beat (that's just my opinion)

@Stefan_Kawalec Год назад

@@MORGANSMaintenance I'm not saying that Klein Tools are low quality. It's just that colour bringing rather not good memories and connotations. Anyway. Merry Christmas to you and all your family. Thank you for your effort with the channel. It's a real pleasure to watch your videos.

@MORGANSMaintenance Год назад

@@Stefan_Kawalec I knew that’s what you were saying 👍 Merry Christmas to you as well! It’s been a real pleasure getting to know you in the last year… look forward to what’s ahead.

@choccolocco Год назад

I know what you mean, as I’ve seen so many drivers with that color handle that would literally crumble if you ever torqued on them. Klein is way different. I’ve got my dad’s old Klein nut drivers and screwdrivers, some older than me, and in my experience, they are some of the best as far as longevity and quality. Of course, you pay for it, but Klein is a good investment as far as tools.

@Stefan_Kawalec Год назад

@@choccolocco I know that Klein product should be ok, even with that yellow plastic. But a long time impression is a long time impression. Can't help it. BTW, those flint artefacts you're finding on your channel are very interesting. I didn't realise that there are so many of them. Here in Europe they're much harder to find, because our land is much more processed and dug over.

@thelegobuilder1709 Год назад

Where did you get that coffee cup?! I want one

@MORGANSMaintenance Год назад

I originally saw it on Facebook Marketplace, which let me know it existed. I ended up getting it off eBay. I don’t believe they sell it new… I think it was a promotion.

@lefefesole8948 4 месяца назад

That middle peace , what is the thread for?

@MORGANSMaintenance 4 месяца назад

I never paid much attention to it. Nothing that I know of, may just be part of their manufacturing process

@chrisfyfe9212 Год назад

I have yet to see one in Canada ( I checked the local Depot ) We call it the Home Despot !

@MORGANSMaintenance Год назад

Mine hasn’t had it in store yet either… only online.

@NicksStuff Год назад

Impact *rated* but it's not an impact driver. That would be so cool...

@MORGANSMaintenance Год назад

Yeah I guess they can't really make the shaft and handle all solid enough for striking since parts are changeable/movable. Would be nice 👍👍

@DanielDraper-ki4hr 3 месяца назад

They make a ratcheting version now, it's even better and compatible with the 1/4 pass through socket set. The socket set extension snaps into the handle and works as a nut driver for all the sockets and bits.

@MORGANSMaintenance 3 месяца назад

I have that one too.. I haven’t picked up the pass through set, but have some of the deep well flip sockets that use that adapter.

@DanielDraper-ki4hr 3 месяца назад

@@MORGANSMaintenance I bought the 1/4 and 3/8 drive pass through socket sets, but only carry the 3/8 in my tool bag. I don't really need the bits in the 1/4 drive set, and the 3/8 goes all the way up to 3/4 socket, the 1/4 only goes to 9/16. I don't need the extra weight of the 1/4 drive set.

@MORGANSMaintenance 3 месяца назад

@@DanielDraper-ki4hr 👍

@Hazan1fan Год назад

Home Depot’s website says it’s “exclusive”. … so you probably won’t find it elsewhere

@MORGANSMaintenance Год назад

The flip socket was the same way when it came out. Maybe Klein has a deal with them to release a tool for so many days through them prior to releasing to other stores. I bought mine through Home Depot… but it shipped directly through Klein.

@trevermccall6762 Год назад

👍

@MORGANSMaintenance Год назад

Appreciate it 👍

@buterdhams Год назад

What is the Klein thermo on the left ?

@MORGANSMaintenance Год назад

I believe it was a promotion a few years ago. I don’t think they sell them, I picked mine up on eBay.

@BLASTIC0 Год назад

C’mon Klein… METRIC flippies… pleeeeeease!

@MORGANSMaintenance Год назад

I know… you Metric guys get the shaft on a lot of tools. I only run into them occasionally, but you would think companies would realize they are missing out on an entire segment of the population… that and most of us would buy both versions if we needed it or not 😂

@joshuaewalker Год назад

9:39 That's what she said.

@MORGANSMaintenance Год назад

😂😂. I usually have one of those moments every video when I watch it back 👍

@danbolton3180 Год назад

Did you know that the screwdriver is the third most used tool in the average American home. A hammer is the second most used tool, and the most used tool in the average American home is the butter knife.

@MORGANSMaintenance Год назад

I can see the hammer… but would have never guessed a butter knife 😂 These 11-1 type of screwdrivers are the ones I keep in my house, the cup holder in my truck, and any other quick grab spot. Great for when you don’t 100% know what you are about to deal with.

@wim0104 Год назад

well damn, I'm subscribed to the Klein mailing lists, and browse their product release website every month, and this never popped up!? WTF Klein.

@MORGANSMaintenance Год назад

I know, me neither…. This is what I was talking about that would be up your alley. I thought wim is going to like this one. I ended up getting it earlier than it said. I thought I wasn’t getting it till this weekend.

@wim0104 Год назад

those nutdrivers are great for sleeve anchors

@MORGANSMaintenance Год назад

@@wim0104 yeah I like having those as an option now… if I need magnetic I’ll throw in the flip socket or Malco. There have been multiple times I needed something a little deeper.

@darrencampbell8817 Год назад

Another commenter said there were 3 different versions of this? That's interesting because I can't find a bit of info on this one, it's not even listed on their website. What the hell is that about?

@MORGANSMaintenance Год назад

@@darrencampbell8817 I know… they must have some deal with Home Depot to be sold in their stores they get first dibs… but to not have it on their own website??? 🤷‍♂️

@patterrick1 Год назад

is that a coffee thermos shaped like a klein screwdriver?

@MORGANSMaintenance Год назад

Yes it is… I found it on eBay after seeing one on Facebook Marketplace. I think it was a promotional item one year

@waytospergtherebro Год назад

There's nothing I'd rather do on a ladder with gloves on than fiddle around with a 3D memory game.

@MORGANSMaintenance Год назад

I prefer dedicated screwdrivers when I’m working specific jobs myself… it is easier/faster to swap screwdrivers out of a pouch than to swap bits around in these sometimes. I like these screwdrivers in my bags for service work, in an attic, or in a crawlspace. Less tools to lose and I have more options in case I run into something weird. I get what you are saying for sure 👍

@branned Год назад

I like Klein Tools, but Klein has a crappy warranty that requires YOU to keep a receipt.😢😢

@MORGANSMaintenance Год назад

I’ve never used their warranty so that’s good to know. Some people say they take theirs into Home Depot and just swap stuff. I’ve never done it… and to be honest based on my experience of returns I find that hard to believe. Would be nice.

@branned Год назад

@@MORGANSMaintenance I never tried Home Depot on Klein. I emailed Klein directly and they were sad.

@MORGANSMaintenance Год назад

@@branned that stinks… you would think companies would know by now that good customer service is what keeps customers. A good or bad experience is what makes someone either a customer for life or a never buyer. Hopefully I’ll never have to use the warranty. I’ve never tried Milwaukees yet either. Ridgid is the only company I had a bad experience with so far. The best is the ole tried and true Harbor Freight. If only all warranties worked like that. 😂

@branned Год назад

@@MORGANSMaintenance Craftsman is the best Warranty I have used (online) not Lowes! Others include Performance Tool (PT), Husky online (not at Home Depot), Proto, Stanley online, K-D Tools/Gearwrench.

@branned Год назад

I have had Craftsman and Stanley even substitute better tools and or a complete set.

@robertroberts721 Год назад

I am very disappointed in Klein. I definitely won’t be purchasing anymore of their “multi tools”. I purchased both the Klein HVAC 14-in-1 and the Klein 7-in l-one impact flip socket. Neither of these tools are game changers. The HVAC tools come off of the storage slots and all fall down into the handle. The 7in1 rubber handle spins when gripping it to turn and the magnet on the tip comes out with the fastener. Theses definitely are not tradesman tools for a guy that uses them daily. Maybe they are more suited for a homeowner or DIYer

@MORGANSMaintenance Год назад

I have heard several people having problems with their magnets.. mine have not came off yet, but I also still use MALCO’S quite a bit. I generally use the Kleins as screwdrivers and impact bits in a pinch. Stinks you are having problems with yours. The only one I have been disappointed in is the Magnetic 11-1, but only because I feel it’s not magnetic enough.

@anoldocastro4792 Год назад

Made in Taiwan

@MORGANSMaintenance Год назад

I didn’t check but I’m sure it probably is… a lot of tools are.

@ianp6994 10 месяцев назад

This one sucks just because it's got no magnets. The 20-1 is much better

@MORGANSMaintenance 10 месяцев назад

Yeah for certain things it’s not great. Sometimes a hollow bit driver is useful, but a magnetic one is usually more useful.

@mikebelperio2579 Год назад

Milwaukee makes excellent tools. So does Klein but you Milwaukee tools are about 1/2 the cost. Klein wants to take my hard earned money for no res; benefits. Many German tools are better than Klein and cost the same or less

@MORGANSMaintenance Год назад

I run all Milwaukee power tools (for the most part) Their hand tools I have used over the years are pretty good too. Some of the best you can get at Home Depot. Klein pliers/strippers/etc. are beginning to be priced fairly high. They are good, but I prefer Knipex right now and the price is pretty close on those.

@gregorholmes1837 Год назад

SHUT UP AND JUST TELL ME. Say game changer one more time. I freaking dare you

@MORGANSMaintenance Год назад

There is a GAME CHANGER chapter that you could have skipped ahead to watch… I like to do that because I feel like being able to add chapters to videos is another Game Changer that separates my channel from some others. Thanks for watching and taking the time comment 👍

@gsxr419 Год назад

I am going to have to quit watching these youtube tool videos I'm spending a small fortune.

@MORGANSMaintenance Год назад

I know…. I didn’t really get into watching RU-vid till about 2 years ago. I have since replaced almost all my tools as an “upgrade” 😂..

@charlesviner1565 Год назад

👍

@MORGANSMaintenance Год назад

Thanks Charles 👍

Далее

TOP 5 Klein Screwdrivers - Does Your Favorite Make the List? #tools #klein #top5 #electrical

20:55

TOP 5 Klein Screwdrivers - Does Your Favorite Make the List? #tools #klein #top5 #electrical

Просмотров 16 тыс.

NEW Klein 11-1 RATCHETING Impact Screwdriver 32500HDRT - 1st Ratcheting 11-1? #tools #klein #review

11:21

NEW Klein 11-1 RATCHETING Impact Screwdriver 32500HDRT - 1st Ratcheting 11-1? #tools #klein #review

Просмотров 23 тыс.

СЕРБСКАЯ ЛЕДИ ПРЕВРАТИЛА ПАРНЯ В ЗОМБИ!

09:02

СЕРБСКАЯ ЛЕДИ ПРЕВРАТИЛА ПАРНЯ В ЗОМБИ!

Просмотров 862 тыс.

СКУФ ИЛИ НЕ СКУФ? #иванабрамов #натальнаякарта #юмор #shorts

00:58

СКУФ ИЛИ НЕ СКУФ? #иванабрамов #натальнаякарта #юмор #shorts

Просмотров 96 тыс.

100 ДНЕЙ НА ЗАБРОШЕННОМ МОСТУ В МАЙНКРАФТ!

51:52

100 ДНЕЙ НА ЗАБРОШЕННОМ МОСТУ В МАЙНКРАФТ!

Просмотров 588 тыс.

Лукашенко оценил честность руководителя! (Архив) #лукашенко #беларусь #новости #политика #президент

00:32

Лукашенко оценил честность руководителя! (Архив) #лукашенко #беларусь #новости #политика #президент

Просмотров 363 тыс.

10 Worst Items Ever Tested? Let’s Find Out!

20:40

10 Worst Items Ever Tested? Let’s Find Out!

Просмотров 1,5 млн

5 Drill Features Everyone Should Know

8:35

5 Drill Features Everyone Should Know

Просмотров 2,9 млн

NEW Klein 7-in-1 Impact Flip Socket Set with 9/16 - 32933G

10:35

NEW Klein 7-in-1 Impact Flip Socket Set with 9/16 - 32933G

Просмотров 30 тыс.

Is the Klein 11 in 1 Impact-Rated Screwdriver/Nutdriver good for locksmith use?

17:25

Is the Klein 11 in 1 Impact-Rated Screwdriver/Nutdriver good for locksmith use?

Просмотров 1,8 тыс.

7 FATAL Wiring Mistakes Most DIYers Don't Know They Are Making | Most Are Guilty of 3

13:01

7 FATAL Wiring Mistakes Most DIYers Don't Know They Are Making | Most Are Guilty of 3

Просмотров 7 млн

5 Tools To Throw Away (And What To Replace Them With)

10:52

5 Tools To Throw Away (And What To Replace Them With)

Просмотров 516 тыс.

My EDC Tool Kit

12:59

My EDC Tool Kit

Просмотров 518 тыс.

Klein "Super Screwdriver" - Super Stubby and new Tools at Lowes

11:20

Klein "Super Screwdriver" - Super Stubby and new Tools at Lowes

Просмотров 17 тыс.

NEW Klein IMPACT 13-1 Ratcheting Screwdriver - Only $1 More than the 15-1... Worth it? #tools #klein

10:46

NEW Klein IMPACT 13-1 Ratcheting Screwdriver - Only $1 More than the 15-1... Worth it? #tools #klein

Просмотров 31 тыс.

Debunking Pocket Screws

13:47

Debunking Pocket Screws

Просмотров 594 тыс.

гороховый СУП

0:57

гороховый СУП

Просмотров 2,8 млн

Эта фраза звучит так: «Ко мне приходит только всё самое хорошее».

0:31

Эта фраза звучит так: «Ко мне приходит только всё самое хорошее».

Просмотров 2,5 млн

вся правда о бьюти в тг: rosesvetaa🤍 #grwm #redhair #makeup #топ #lipcombo #тренды #рекомендации

0:11

вся правда о бьюти в тг: rosesvetaa🤍 #grwm #redhair #makeup #топ #lipcombo #тренды #рекомендации

Просмотров 1,6 млн

И ВОТ ЭТО ПРОДАЮТ ЗА 2 МЛН РУБЛЕЙ.. МУЖЧИНА НЕ ПОВЕРИЛ СВОИМ ГЛАЗАМ! #shorts

0:30

И ВОТ ЭТО ПРОДАЮТ ЗА 2 МЛН РУБЛЕЙ.. МУЖЧИНА НЕ ПОВЕРИЛ СВОИМ ГЛАЗАМ! #shorts

Просмотров 2,7 млн

Уверен, каждый хотел бы себе телефон как Илона 😉

0:35

Уверен, каждый хотел бы себе телефон как Илона 😉

Просмотров 7 млн

❤️💚МАГАЗИН САМООБСЛУЖИВАНИЯ В БЕЛАРУСИ

0:25

❤️💚МАГАЗИН САМООБСЛУЖИВАНИЯ В БЕЛАРУСИ

Просмотров 7 млн

Приходите к нам, чтобы повторить😉 TG: @ALLOSTUDIO #allostudio #шоппинг #женскаяодежда #аллостудио

0:34

Приходите к нам, чтобы повторить😉 TG: @ALLOSTUDIO #allostudio #шоппинг #женскаяодежда #аллостудио

Просмотров 3,5 млн