Knife Making - Making a Simple Viking Dagger 

Thanks my friend 👍👍👍

Спасибо, мой друг. Да, его еще можно сделать и запустить, только поменяй рукоятку и будет невероятное копье. 👍👍👍

Thanks my friend 👍👍👍

Thanks my friend 👍👍👍

Thanks my friend 👍👍👍

Thanks my friend 👍👍👍

Muito obrigado meu amigo, vou ar uma olhada lá, estou pra comprar algumas dessas limas para usar, acredito também que facilitara muito 👍👍👍

Thanks my friend 👍👍👍

Thanks my friend 👍👍👍

Thanks my friend 👍👍👍

Thanks my friend 👍👍👍

Hahaha a clássica casa brasileira. Muito obrigado meu amigo 👍👍👍

Thanks my friend 👍👍👍

Muito obrigado meu amigo 👍👍👍

Muito obrigado meu amigo 👍👍👍

Hello my friend, yes I'm still going to put it on, I'm going to have mine made soon. I believe that next year I will start making knives with my logo 👍👍👍

Oh my friend, no problem. I'm glad you're recovering, I hope you get better as soon as possible. Stay with God and take care of yourself, a big hug. 👍👍👍

Thank you so much my friend. A merry Christmas to you and your family too my friend, a big hug to all of you. 👍👍👍

👍👍👍

Yes, she looks like one 👍👍👍

👍👍👍

Yes, it would be a very good spear. Because it's shaped like a spear. 👍👍👍

Of course, the wood will smell like the worst after the treatment, but it's fumes and will disappear. The colour stays and looks good with a thin oil layer to harden the wood even more. It's just a matter of timing.

Thank you my friend. I've never tried, but I'll try. The hardest thing for me would be getting the vacuum done. This process looks very similar to stabilized wood. Would it work with different color dyes? I am going to try 👍👍👍

I understand, so this process would be more to give resistance to the wood@@citizenVader

@MakerHA it serves to colour the wood into the core and looks more natural. The thing about wood is its fibres are like small pumps pushing water from the roots to the leaves and into our air. You just replicate the process on a small scale, with chemicals instead of water, the fibres work despite less of using a fluid chemical. The reason for the cup is just to have a good feeling of how much the wood is absorbing, but it only works in a closed container like a tin bucket or a big glass jar you can close. You don't need a vacuum system, but it's better for the process to work, that it is filled with the fumes from the ammonia. So you only need to make sure the process will have time to push the oxygen out of the system. I just close the container lightly, and the ammonia does the rest of the work slowly inside the jar or what you use to seal the wood in. Some people just put it in a plastic bag and let it work for whatever time it takes. It's the difference in wood fibres that determine how fast or slow the process is.. Pine for example have large fibres and that's what makes it light and easy to break, whereas hardwood have more compact fibres and more density in the material. So it's best to have the containers in a ventilated place like the garage or a storage room or you might get a headache from inhaling ammonia. I don't rush these things because it's up to the single pieces how much and how much they absorbed. It's a good way to remove the rest of the moisture in the wood too, so that decay stops. So you kinda kill a lot of birds with one stone by preserving it like that. I just finish with oil because I prefer oil. The wood already has small amounts of oil naturally, so it doesn't get rotten. You actually just manipulate the wood to do what it does to begin with, but just with chemicals inside the fibres.

I understand. This process is very interesting. I will definitely try to make it, as I only use hardwood, . So I believe the results will be much better. Could I find a video here on RU-vid about it?@@citizenVader

bro might have a pile of them in the back

I don't know 😂😂😂 Thanks my friend 👍👍👍

@@kassiog.6595 I usually get them at car repair shops, but they're not always for sale.👍👍👍

Yes, it really looked like a boar spear 👍👍👍

Thanks my friend. Normally it's in the forge itself, I have no idea what the temperature is, but the time depends on the color, I always take it out of the forge and observe its color, when it starts to turn golden it's already at the ''ideal point''. ' I remove it and let it cool slowly. To give you an idea, more or less, this takes about 5 minutes, or something close to that. I recommend doing it in a temperature-controlled oven with a timer. I even have one here, but as I have limited time to make the knives, film, edit and make it work in the end, I speed up the process in the forge itself.👍👍👍

@@MakerHA I was asking about the oil and temperature of the oil before you quench I myself go on the color of the steel I also use my forge as well

Oh yes, I'm sorry. The oil I use is burnt car engine oil. Its temperature is now room temperature. As here in Brazil the climate is hotter, I believe the oil is around 86F. But I don't heat it, because at room temperature I get a greater heat exchange when tempering. @@daviddingus8575

Yes, the leather ones will be much more durable. But where I live it's very difficult to buy leather. Only online, which is also very expensive. But I'd swap them for leather without a second thought 👍👍👍

I can do this 👍👍👍

Yes I can sell 👍👍👍

Да, без сомнения 👍👍👍

👍👍👍

да, я мог бы сделать 👍👍👍

Muito obrigado meu amigo 👍👍👍

Я покупаю их в автосервисе. Там всегда есть некоторые👍👍👍

@@MakerHA бац ответ на русском. Неожиданно) удачи тебе друг и процветания твоему каналу. Твои работы великолепны.

Гугл переводчик, я перевожу все комментарии. Большое спасибо, мой друг@@user-ox4yc1ni4z

👍👍👍

Why is there something there? I don't know 👍👍👍

@@MakerHA looks a lot like mehrunes razor!

It was pure coincidence, as I don't know the game. Cool, she actually reminds a little of Mehrunes Razor@@osricsbruk

Era pra ser uma mais fina, daria um visual mais agradável, porem nao tinha, ai foi essa mesmo 👍👍👍

👍👍👍

Title of the video is knife making, not forging a knife. He makes awesome knives, why the negativity. No one’s forcing you to watch this.

Thank you very much my friend 👍👍👍@@bradleetaylor4055

👍👍👍

У меня никогда не было проблем с температурой сгоревшего масла. Что касается предварительного нагрева, то при закалке это не имеет большого значения, потому что, если у меня будет более низкая температура на лезвии, эффект будет тот же. Цель состоит в том, чтобы быстро охладить его, и иметь хорошее лезвие - это хорошая закалка. 👍👍👍