KNOCK knock…DENIED 

16:24 The step sister comment cracked me up 😂

Rory , Robby, Paul, Matt, Merlin help Ben find a Motor for his truck...!

Out of gas, it happens.. the real moral of the story is to have a dad that loves you and will always be there for you

" If the glove don't fit, you must Acquit" LOL

I agree Robby ,Paul,Merlin and Rory need to help Ben out with a newly rebuilt moto

Check with cousin Merlin, he always has a couple sitting around around. He gets them from his junk yard buddy.

Your house is looking good as each step gets finished.

Marie you are amazing you are not afraid to try anything the house looks great congratulations on it being done on the outside. The kids did a great job too they don't whine like kids today they just get it done . Oh ya Dad did ok too 😂 we love ya Ben 🇺🇲🇺🇲🙏🙏⚒️

Natty is hilarious the house looks awesome love the siding❤❤

The G.M. AFM/DOD system shows up again.

Y'all have done an amazing job on y'all's house! Love watching the whole family pitch in and do the work! Alot of kids these days don't help their parents!

Moving forward a little at a time is still moving forward.👍

Doing a great job guys, keep up the great work!!!

What nice kids! Hard workers,prolly got it from mom and dad.house is so beautiful, concrete work looks great too.god bless kid's.love skinner family.

I love the progress and I know a matter of time you guys will pass and all the hard work will be worth it

If it's low on oil you have ticking lifters refil the oil and clean pcv system

Love this channel ❤️ The teamwork is awesome! I absolutely enjoy this family. Thank you for sharing 👌 😊

@24:30 change the oil? Or add if it's low,crankcase ventilation (pcv) mite be plugged that happened on my ma's car it was blowing oil into the carb real bad blow by, the whole inside of intake manifold was soaked with motor oil .Changed oil cleaned pcv system and it reduced oil consumption drastically.

Coming along great.

Good move on the tires, I put 265's on my 2003 Exploder, With a 3" lift, it made a big difference.

It looks like you are making serious progress on the house. Hope you can move in soon.

Step sister! Almost fell out of my chair! 😂 Great video! Excellent people, excellent content and excellent editing!!

That DPStech is a great piece of equipment. I have other of their tools and am impressed.

Why blocking your sister shot was so funny? LOL. Hey let us see some of his games footage like Paul show of Jace.

Y’all have been very professional about the inspector. I would have already lost it on him!

Don’t let the inspections get you down. The entire fam has accomplished so much on the house

That borescope works real good and has awesome picture on it. Looks nice and clear I have to get one of those

Good afternoon, from Nyköping Sweden!

❤ Bummer about that inspection. 🦬

It's looking great.

Great job again.

It ain't got no gas in it

Looks good nice job😊

Mari and Ben, your house looks amazingly beautiful. Congratulations! Job well done. Well deserved 👏 🙌 👌 👍. Thanks for the share. Your kids are great bunch 👏 👍. Keep up your great work and videos. From Orlando Florida.

amazing how anything will start and run when it has ...GAS..... what a good Dad Ben is coming to the rescue of a damsel in distress...!

Glad to see more progress on the House !

You need new cover gaskets too

Chimney sweep here. The shot on the stove pipe going into the wall. Couldn't tell if the mantle was wood or not. Couldn't tell if Connector pipe was single wall. If both of those exist you should have a heat shield between the pipe and the wood. Clearance to combustibles on single wall connector is 18 inches. Keep up the fun videos!

I is so great to see a family work together so well! Enjoy it while the kids are still at home!!

I love the siding and all you are doing to your home. Great job Cox family!

Very nice your, wife can use a cut-off grinder. What a great family!

Pretty soon you'll be relaxing in that new house. It will all come together.

Your house is a labor of love. Something to be very proud of, and the kids too. You all have some nice things there. I'm third generation construction person and you all have taken on a big task and are killing it. Very nice job.

Good Morning from Western Upstate NY.

I've had to buy a lot of tires from FB I think it looks better Sorry about your truck as you said always something. If I lived closer enough I would have you work on all my stuff. Great Dad and family. 🙏

fingers crossed for ur inspection 😊

You are a wonderful family doing amazing work. Incredible skill sets. May you always be blessed.

GOOD JOB!

Failed another inspection?..............I suspect your "Inspector Gadget" watches your channel. 😂

Do you know what time it is when the inspector fails you for the third time ? It's time to get a new inspector !!! 😜

I sure enjoy your family!

I knew you guys would love Burly burger. I'm glad you stopped there while up north.

Well Hello from Kiwi land

Awesome and outstanding as always

great as always great content very entertaining

The siding looks great ! 👍

Rebuild kit along with AFM delete kit Ben, machine heads. You'll have a new engine ben instead of a used one.

Man I know that sigh... but God provides.

Awesome progress on the house. Sorry for your engine trouble on the Denali. What is that on Oaker's face? Is he trying to look like his dad?

I love that outside light I never seen one like that before 😮

I don't have anything that new but I have two 400 small blocks

Driverside valve cover, oil pan deflecter both have factory service bulletins on them and need to be replaced. And plug in a Range Technology dongle to keep it in V8 mode all the time. DOD ruins engines and transmissions the plug in will save your truck. Change your oil regularly.

Time for a 8.1 and Allison swap! Seems like I remember someone down there with a wrecked Suburban that has a good motor.

Rusty's OffRoad 2.5 inch springs and shocks were great on my WJ.

you could spritz your siding with muratic acid to accelerate the rust patina

Def sounds like death rattle on engine, pos note exterior house lookin good !

you guys are an awesome team lol

That is a good quality picture.

Hi guys I reckon yous have done pretty good job well done keep up the good work not far to go

2007- on up to when GM attempted to fix it.I won't buy a 07 on up because of it.GM / CHEVY.!!!

So did you and Paul have a falling out? I know you have your own youtube channel now but it seems he would be a great resource for a motor and possibly a place to change the motor. I just feel like there is something we don't know about the two of you. Your brothers as well as youtuber's. I just feel with the resources you both have and the knowledge you both have this truck could be up and running in no time flat. Also I think if you both did a video on teaming up it would be a boatload of views. Just my thoughts. Still like the content.

I think next time the inspector visits. Ben you're on the grill, girls. You're making dessert, boys, you're serving and making salads and drinks. That should get your occupation permit 😂😂. Sorry about your truck, Ben. And the house looks amazing 👏.

I don't think the gloves were supposed to fit you Cinde-fella !

Loving the look of the house👏. Fun video except the truck problems 😢 Happy 4th of July 🎉

What I do when I'm welding is I use one hand to do the trigger and I use my writing hand closer to the tip to control what it is doing otherwise I do terrible welding

compression test the cylinders

Hope this is the last list from the inspector. Things are really looking good so far. Help Ben needs an engine for his truck.

Advanced Fuel Management and Cylinder Delete.Takes out lifters same cylinder or? ..And you see the damage it causes.

It's the OJ glove. If it does not fit, you must acquit LOL!

I've heard that a mechanics car doesn't run. While everyone else's in working.

lifter noise you may need to do the AFM / DOD delete!

I thought you were going with airstream look like the camper

Inspectors suck. I know they have a job to do but some of them let it go to their heads. Good luck getting past next time and moved in soon you all have worked hard to get there.

We still love you Ben (The Wicked Step Sister)...🤓

The house is looking Beautiful wow you's did a good job. I wish more people would try and remodel there own houses or even Build. There isn't nothing to it. All's you need to know is how to measure even if you have to count the lines on the tape measure 😂 like me 😂

You got cyinder delete/ afm problems.lifters and a dead cylinder. GM famous.!!

I go to our Dump and jump in the bin and dig threw th.for tires. I take them home and use them or sell them to people who need them. I don't charge them much 20 dollars most of the time. Crazy how good of tires people throw away. Like they say "Ones man's junk is another Mans Treasure"😂

The popular trend now is to build with old rustic metal and wood,I don't get it,maybe because I lived through that era, and it meant you were poor, I guess the next Trend might be living in caves????? I do like your videos, and your wife is a hard worker, I do miss you on Matt's though.

could the needle bearing rocker arms came apart and sent needle blearings thru your motor. Common for late model gm's

I’m confused on the siding, is it aluminum.?

as for your truck try valve seals first then see what happens I've got a chevy trail blazer 07 doing almost the same

The WJ speedo will be off by enough to get a speeding ticket, at 55 on the speedo you will be going 63, ask me how I know.

Ben talk to your cousin Merlin he's always willing to help

Can you rebuild it ben at least you would know what you got

Ya!! Someone come and help Ben get a new motor and put it in with him!!!

hey you found OJ's Glove

Ben did you do a compression test ?many of the forums suggest the PVC valve ,the valve cover breathers etc and then catch can installed,but if compression is weak then the rings . Are you familiar with @Daves Auto Centre in Salt lake ?

When all of the sheet metal has rusted, are you going to spray it with a clear coat to seal it?

I feel bad about the inspection. Hopefully you all can get the list completed and pass the next one. Out of curiosity, is it the same issues that keeps popping back up on the list or is it a new set of things to fix?

Did you slope the ground so that the rain water flows away from the house?