KOTTO Fume Smoke Absorber Amateur Review

Подписаться 1,4 тыс.

Просмотров 18 тыс.

50% 1

In this video, I perform a quick review of the KOTTO Strong Suction Hose Fume Smoke Absorber. I go through a breakdown of the materials, a demonstration of the unit, and my final thoughts. TLDW at 7:30
Please note: The following video is not sponsored. I was not given the product in exchange for a review. All views expressed are my own.
Video script: kofskie.com/2021/05/04/video-...
Timestamps:
0:00 - Introduction
1:00 - Breakdown of device (Items included, how to use it, opening it up)
3:04 - Demonstration of fan noise (HEADPHONE USER WARNING!!!)
3:35 - Test of unit with soldering iron project
4:50 - Test of unit with hot air station
6:20 - Final thoughts on unit
7:30 - Slide with my pros & cons of the device
Non-scientific sound test was tested with the app called Sound Meter. play.google.com/store/apps/de...
I am associated with the Amazon Affiliates Program. I receive a small percentage from the links to Amazon products. If any of my videos helped you in a project, please consider using these links to support me. Thank you.
-Kotto Smoke Absorber: amzn.to/3ucz6Ib
-Replacement HEPA Filters: amzn.to/33bpfXf
Music:
-Exhale - Jeremy Blake
-Everything is Gonna Be Just Fine - Jeremy Blake

Наука

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@patricklarose Год назад

This definitely looks like the best fume extractor on the market for the price range. This review was very well made. Great work!

@OrcaBrigade Год назад

I might actually get this now. I suppose if it doesn't suck enough I can always modify it with a larger fan and such... I figure 80usd for a starting point isn't... too bad? I've not found anything similar for less that required minimal work on my end to get it up and running.

@timsmith4005 Год назад

Thank you for your detailed review. I ended up purchasing one of these units, and made sure to add the HEPA filters as well. Question, would you happen to know at what point you could visually tell that the HEPA filter is in need of replacement?

@technotard13 Год назад

Sorry for the late reply. I never have enough time in the week to get to comments. Since using it over a year, I've only replaced it once (and it was actually this past week). The main issue was the carbon filter attached to the filter. It had accumulated a ton of smoke and took a greyish-white look. I tried ripping the carbon filter off to try salvaging the HEPA filter portion. There wasn't anything eye catching about the HEPA filter (besides the remenants of the carbon filter that were stuck due to it being glued on) like the carbon filter but it did smell like flux. That was enough to break out the second filter for me.

@maicod 3 месяца назад

Hi I have a question, Im in Europe importing this from the US: can the power cord be replaced and if so is it a "figure of 8" connector on the PSU side ?

@YokaruXD 2 года назад

Have you tested the smell with the carbon filter? I solder metal and use it to extract those fumes and I can't smell a thing.

@technotard13 2 года назад

Yes, I've tried with the default carbon filter and it acted the same way as my previous bench fan when working with flux.

@mehditouati86 Год назад

sorry i have the same with same material, all smoke go to my noise when i use my air station.

@bringasortega 2 года назад

I have been using this product at work for almost one year, but now I am worried after you mentioned it is not good for professional use. Does it mean that it does not protect you from the fumes? I do not solder too much though, and I have never noticed smells.

@brianmathis5423 2 года назад

I think he was considering people who solder 24/7, normally those are the people who would want a beefier unit

@akongas 2 года назад

any way of testing the exhaust to see if any fumes escape?

@technotard13 2 года назад

Good question. I assume both the carbon filter and HEPA filter wouldn't catch everything but I didn't think to look at the back of the unit. In terms of plain soldering, I've never noticed anything escaping as long as I pointed the nozzle over my work. I can notice smoke remnants on the carbon filter portion of the HEPA filter as well. As for using it with the hot air station, that could explain why I need to keep the unit running for a few minutes after I finished on a project to remove most of the flux smell in the room. It's possible the HEPA filter doesn't collect all of the fumes and passes some of it through the exhaust. This is a speculation though as I don't have a way to prove that. All that matters to me is if it improves the air quality while working and the unit has shown it in the time I've owned it. But that is something to think about, especially when the filter eventually gets worn to the point of replacement.

@akongas 2 года назад

@@technotard13 Thank you Steve for your response. It looks like a great little unit, Im thinking about picking one up. Im wondering if there are any data sheets available from the company themselves. I might get in touch with them and see. If I find out the info, ill pass it along to you. Thanks again :)

@akongas 2 года назад

@@technotard13 Ive emailed them now ;)

@lyianx Год назад

First time i heard someone pronounce it 'Heepa"

@justainchoe6141 Год назад

Just a suggestion, but maybe just get an actual hepa filter and use it as your “fume extractor.” It’s going to move more air through a legit hepa filter instead of that dinky thing so will continually clean the air. Something like a Winix. On the high setting it should be strong enough to suck air from your work area if you have the space on your desk, or it can just be an addition to your local area fume extractor.

@OrcaBrigade Год назад

I have one, I'm actually about to try it to see if it'll work as a rednecked solution. >.>;

@OrcaBrigade Год назад

Update; (didn't feel like editing the prior) It works quite well & shows much promise! I should either set up some kind of enclosure to optimize it or some "Ducting" shrouds around it to block off the back side of the intake. That should increase the CFM of the area being worked within. I don't think I'll need any kind of top hood but it surely wouldn't hurt. The shroud/ducting can be made from cardboard, tape, or foil.. it could be made better but for the sake of allowing me to move it back into my resin printing enclosure it'll work fine. I may still end up getting the above device for the sake of ease and not moving shit back and forth. I know I can add on to it or make something else in due time. I've been surprised what kind of high CFM duct (booster) fans are out there. So rigging up a basic MDF or.. reclaimed pallet wood box could possibly allow me to also add vac suction with a bypass too. In essence, if I wanted to I could make a dust collecting & fume extracting system, if I plan it out right.