Kraton 8s Vitavon Hubs and Bulkheads!

Подписаться 73 тыс.

Просмотров 22 тыс.

50% 1

Took a bunch of work but I got it done!!
Links below for everything on the truck. Use them to support the channel.
Reefs RC Grease www.reefsrc.com/shop/p_150284...
Vitavon Kraton 8s Parts
rover.ebay.com/rover/1/711-53...
Vitavon K8s Front Hubs
Ebay rover.ebay.com/rover/1/711-53...
Vitavon K8s Rear Hubs
Ebay rover.ebay.com/rover/1/711-53...
Vitavon Bulkheads
Ebay rover.ebay.com/rover/1/711-53...
Kraton 8s
Amain bit.ly/2XlLrvz
Ebay rover.ebay.com/rover/1/711-53...
Castle Monster X8s 800kv system
Amain bit.ly/36uGfKU
Amazon amzn.to/33uUrBL
Ebay rover.ebay.com/rover/1/711-53...
Amain Affiliate bit.ly/3cHmsHX
Amazon Affiliate amzn.to/364MSmV
Redcat Affiliate! Click here to buy anything you want from Redcat!
www.redcatracing.com/?ref=Aog...
Get your Official high quality Exocaged merch and apparel right here on Teespring!!!
teespring.com/stores/exocaged-rc
If you want to become a channel member and see videos early, have more interaction with the channel and no ads, click here / @exocagedrc
Walmart Affiliate!! goto.walmart.com/c/2296982/56...

Развлечения

Опубликовано:

4 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 131

@Evergreen085 Год назад

Man I love these videos. Bad weather at home so it’s nice to be able to watch these cool vidz. Ty 🎉

@mogreasy8499 3 года назад

Man those parts are just amazing looking! I got to say the attention to detail is just over the top, but I wouldn't expect any less coming from Vitavon. Very nice!!!! 👍

@ExocagedRC 3 года назад

Yeah he has consistently got better at his designs

@endliberalism4305 3 года назад

You said if

@teamsargentrc6399 3 года назад

That thing is epic. Vidavon rocks!!! Awesome upgrades the best on the market... Don't have much of them but what I do have is flawless and built with quality...🤜🤛👍!!! Epic video Joe!!!

@theirishaxe9405 3 года назад

You should replace those junk bushings in the steering rack with bearings bro! 👍 I replaced them with bearings it's so tight and smooth now 👍 ten bucks from jims bearings. These parts are soooo NICE !

@ExocagedRC 3 года назад

Ahh ok I’ll look them up. Thanks!

@redblue40rc33 3 года назад

Couldn't find part number bearing for outcast 8s steering crank...bushing is 6x8x5, I'm assuming bearings is the same

@theirishaxe9405 3 года назад

@@redblue40rc33 this is what you need two bearings replace each bushing www.ebay.com/itm/202346762801

@redblue40rc33 3 года назад

@@theirishaxe9405 that comes out to 5x8x5.....not 6x8x5.....maybe a millimeter is not a big deal for a 25 lbs RC truck🤔

@theirishaxe9405 3 года назад

@@redblue40rc33 that's what I'm running in my truck two bearings for each bushing and the fit is good

@hammerdown4848 3 года назад

Heck yea brother! I’ve had my eye on these Vitavon parts since they were released and for someone like you to give them a proper review. Now that all doubt has been eliminated, I can order these with confidence. Btw: that was an excellent run with some killer jumps. 👍👊😎

@ExocagedRC 3 года назад

awesome man thank you

@BlvlWmpower 3 года назад

This is turning into a nice experiment here.

@rezzrollinrc 3 года назад

Nothing better then 2 hand fulls of UPGRADES!! Keep up tha awesome wrk Mr. Exo tha legend!! 👍🏽👍🏽✊🏽

@ExocagedRC 3 года назад

Awesome. I’m all out of Vitavon stuff now. LoL. Oh wait... still have to give the Maxx a drive with the new rear bulkhead and bellcrank and Raw500 servo.... LoL I guess I’m not done.

@rezzrollinrc 3 года назад

Righteous man

@markperrella5546 3 года назад

Glad i got the same "hammer" you got!

@whitsrcleftovers2707 3 года назад

"Never" is a bold statement. Lol. They definitely look nice and beefy, but doesn't that mean you'll just jump it bigger... haha. I may have to get some Vitavon parts for the next upgrade, they always look so nice and well designed.

@ExocagedRC 3 года назад

If you can break these I want to see pics! LoL it would be epic for sure!!

@mojaverc1585 3 года назад

Exocaged RC people break m2c

@whitsrcleftovers2707 3 года назад

@@ExocagedRC lol, unfortunately it wouldn't be on the kraton 8s. Largest in the fleet right now is the Maxx.

@705on8 3 года назад

Front hubs are nice! I’ve bent and broke those bolts as well

@JKZ103 3 года назад

Haha, the tekno strap held and the awanfi broke... interesting. Love the new parts joe!

@ExocagedRC 3 года назад

Yep that was a hard top down landing!

@benjaminmcmichael9227 3 года назад

I used ur link and ordered the vitavon knuckles and rear hub set for the armma kraton 6s. Hopefully there as nice as the 8s version. I also have future plans on getting the gear cases for the 6s also once I save up more $.

@markvasseur961 3 года назад

Absolutely Awesome 😁😁

@grandmaster-grouch 3 года назад

so fun i cant wait for me to watch the bash sesh. lol

@aslanmacduffee1681 2 года назад

I need this look great

@gaffle-411 3 года назад

Tons of added weight there.

@ExocagedRC 3 года назад

some but not all that much.

@GussCustomCreations 3 года назад

Nice looking parts! When you get the M2C chassis you will have to throw an Outcast 8s wheelie bar on it. Great vid man!👍😎

@ExocagedRC 3 года назад

Ahh I didn’t even think about a wheelie bar. I’ll see if I can find one of those because I’ll need it for sure.

@Vaterraman 2 года назад

Yet stock hinge pin parts on the bulkhead and plastic diffs. I've yet to upgrade hubs, let alone bulkheads. Never found those areas to be weak. May do hubs at some point. I also went for m2c chassis...after crash, new 7mm shocks, and m2c bellcrank. I shimmed front and rear external diff as well. Your 8s seems rather rachety sounding, loose mesh in something, hard to tell. I use a nice waterproof grease, light green color. It stays on gears very well. As for straps, look for fpv quadcopters straps. Kevlar and metal buckles.

@glennjthompson332 3 года назад

It needs a triple Velcro straps to hold your big battery,🤔😎 nice testing on duribility training exercise.👍

@ExocagedRC 3 года назад

I’ve got these 7200mah’s and a set of 9000’s on the way. I may have to put the stock straps back in

@josephmorelli3191 3 года назад

I gotta tell you, I actually got an anxiety attack watching you. It was like open heart surgery of which I have experienced. Great video. I couldn’t do it if my life depended on it. Good luck buddy!

@justinterrell9555 2 года назад

Do you know where I can get out drives for my diffs and for spindles that use the slider driveshaft that are held on with the threaded pin? What I have is just a bezgar 1 or hm101 that uses regular ol dog bones just trying to figure out a way to upgrade it alittle for the price of them and a brushless upgrade they are definitely worth the effort. Thanks for any info. I love the vids you put out great stuff.

@joshchatwin8569 2 года назад

I need some my kraton exb is not even here yet gotta wait till the 24 of January

@marioskalogeropoulos7054 3 года назад

I'M A W/BIRD GUY/FROM JANUARY '20 UNTIL FIRST WEEKS OF SEPTEMBER (8 MONTHS) I BUILT MY P47 RAZORBACK WITH KOLM77cc V4 AND I ALSO HAVE A LOSI DBXLE 2 WITH SOME UPGRATES!! KRATON IS A GREAT RC I HAVE RUN ONE,BUT YOUR UPGRATES ARE GREAT AND GREAT VID. NICE DAY! !

@AverageReviewsYT 3 года назад

Can't wait for the chassis 😂😂

@ExocagedRC 3 года назад

Yeah me too. I hope I can do a quick swap to it. This stuff in this video was a job. LoL.

@MatrixRC 3 года назад

Hell Yeah!💯👍🏽👊🏽

@GyuHobbyRC 3 года назад

Good video!!!!!😊😊 멋진 비디오 잘 보고 갑니다!!!

@redblue40rc33 3 года назад

I use lucas red tacky grease 😎 inside diff case in all my models... no issues

@HAPPYJACKRC 2 года назад

Nice upgrades. Will those parts fit the 1/5 exb roller model?

@toysforboysrc 2 года назад

How do those 7200/100c PH batteries doing for you? Have to ever used a higher C rating like 120/130/150??? Have you ever used any other lipos that are better than those power hobby? I’m taking like a LOT better and really noticeable??? I ordered the same 7200/100c but I was also looking at the CNHL 8000/120c lipo… I just want to be sure if ima choose a “better” battery it’s got to be much better and also “safe” for my esc… I’m XLX2 & 1100 k’s on Kraton 1/5

@rcmt2965 3 года назад

Man those parts look awesome. Kinda off topic but what tires do you recommend for a trx4? And also should I go with 1.9 wheels or 2.2 wheels

@RC_Berserker 2 года назад

Is the front and rear differential housing identical?

@marillagorilla 11 месяцев назад

Do the stock drive shafts fit the vitivon hubs?

@MatrixRC 3 года назад

Any upgrades to the Front/Rear diff? Twice i had to replace the rear running on stock setup.

@ExocagedRC 3 года назад

As in rear gears? I haven’t broken mine yet, just an axle dogbone pin. I don’t know if any upgrades are out there.

@MatrixRC 3 года назад

@@ExocagedRC Alright appreciate it. Also, with your knowledge & experience I am running Proline MX43 BADLANDS. Modified of course 18mm bore. Do you think that those tires are too heavy & grippy? I only broken the diff wearing those.

@joeycrack509 2 года назад

Do these parts fit the exb version? Great video 👍🏾👍🏾👍🏾

@mofatjippyfransisco713 2 года назад

I bought the V2 bulkheads, are yours the V2 ? Anybody know what they changed ? Mine are on a slow boat from China, Dec delivery sometime....just wondering how to tell V1 from V2. They actually describe them as " Redesigned"

@clairecooper3848 3 года назад

Great vid , sure was a lot of bits on your bench after stripping it down 😳

@ExocagedRC 3 года назад

lol man SOOO much!!! The thing is so big it take up the whole work area.

@GreatLakesRC 3 года назад

They look great but that's alot of extra weight. I haven't broken a diff case or knuckles yet and I'm not super easy on my K8S 🤷‍♂️

@ekimusman2 3 года назад

daaaaaaaaaamn. those are some sweet looking hop ups, pal. rare to see such clean machining from china. you grab those from their ebay store?

@ImEnoas 3 года назад

I wonder if these would work on the outcast 8s since they have mostly the same parts

@ExocagedRC 3 года назад

Yep bolt right on

@unboxinglife7114 3 года назад

Look awesome bro 👏🏽. It’s looking great I bought the red EXB VITAVON bulkheads for my 6s Exb, been thinking about the parts you ha w here for my 8s! I think I might have too! Q: does it make the truck a lot louder?? Also with the extra turnable steering did you have to adjust your transmitter stop end points? Keep up the good work !

@ExocagedRC 3 года назад

I didn't notice it any louder, the bellcrank is the limiter now and hopefully Arthur will take care of that when he makes that piece

@unboxinglife7114 3 года назад

Exocaged RC true that, it looks so solid! Arthur is the man! Parts look great. Fair play getting that lot back together. I’m so game to upgrade, but the task puts me off 😂😂

@enzoprosciutto7639 3 года назад

No lock tight, he’s going to have some trouble.

@hottrodd1090 3 года назад

Are those QS10 connectors

@gonzodetroitify 3 года назад

What a show Exo, now looking from the rear of this beast is this a stick stance or has some lower of something’s gone on here🧐 very stout looking 😎😎😎🤓

@ExocagedRC 3 года назад

All I can say is it is what it is.

@freshej6 2 года назад

Awesome video man looks beefy 💪💪 Quick question will this also fit the EXB roller version ? 🤔

@ExocagedRC 2 года назад

I think they will

@andrewtexiera2858 2 года назад

Where can I buy vitavon parts that will directly benefit you wanting to deck out my k8s

@ExocagedRC 2 года назад

I’ve got Kraton hubs in stock email me at exocagedrc@yahoo.com

@joshchatwin8569 2 года назад

Omg there fucking awesome woooooow

@tinywhoop7432 3 года назад

Can you please tell me, for the entire time of using the Kraton 8s, did you have any problems with the transmission? For example, did any gears break?

@ExocagedRC 3 года назад

So far I have not had any gear issues at all. Trans has been solid and both ends have not given any issue at all.

@tinywhoop7432 3 года назад

@@ExocagedRC thanks

@G__Mason 4 месяца назад

I’d like to know the actual weight difference… thinking bout ordering some bulkheads myself, man their parts and nice but dam they’re expensive lol. With just a handful of Vitavon upgrades you could buy a brand new Kraton lol

@joseCalderon1976 3 года назад

The K8S is already too heavy for its own good. How much heavier is this thing going to be? Now the battery is going to last what? 5 minutes? 😳

@endliberalism4305 3 года назад

So you’ve just added 12 lbs to your build , does it sink in the dirt when you drop it on the ground ?

@ExocagedRC 3 года назад

maybe a little lol

@daviddobson20 3 года назад

am about to put earplugs in like to know-how is yours holding up.

@ExocagedRC 3 года назад

So far I love em in there.

@jerseydualsport514 3 года назад

Where can I get the techno straps? I hate my outcast 8s battery straps, my fat fingers get in way

@ExocagedRC 3 года назад

I order from Tekno or eBay or Amain

@redblue40rc33 3 года назад

I use the drone straps....no problems

@ymollier 3 года назад

Nice stuff ! Is there a noticable change in the steering angle ?

@ExocagedRC 3 года назад

Yeah it does seem to turn tighter but still has a bad push to it when going fast.

@ymollier 3 года назад

Ok gonna try it on my outcast

@onemansvideos2134 3 года назад

I feel like aliens 👽 designed the 8s line

@terryporch5332 Год назад

Will they hold up good for speed run

@terryporch5332 Год назад

The bulk head

@toysforboysrc 2 года назад

whats the added weight?

@ExocagedRC 2 года назад

Maybe 4oz. Not a whole lot.

@alexandergrubb111 2 года назад

The video was good the units look amazing but the sound kept dropping out so I couldn't hear what you were saying

@notlrachtron 3 года назад

Lots of $$$$

@ExocagedRC 3 года назад

LoL yeah and the M2c chassis too. LoL. I got lucky and won a raffle for the new Castle XLX2 with the 1100kv motor so that’s going in it too. LoL.

@terryporch5332 Год назад

Did you use locktie

@ExocagedRC Год назад

On some things yes

@takeitapart1moretime 3 года назад

Are the Bulkheads the same front and back

@ExocagedRC 3 года назад

Yep

@chrischupp9760 3 года назад

You'll have a kraton brute

@championcarcare8207 2 года назад

You put a wheely bar on the back

@endliberalism4305 3 года назад

What brake setting are you at ?

@ExocagedRC 3 года назад

75%

@ExocagedRC 3 года назад

I think, its been a while since I messed with it

@randyaguililla6963 3 года назад

My anxiety it sky high seeing all of it apart! Hahahah, what do you do with all your stock motors and esc? Do you sell them somewhere?

@ExocagedRC 3 года назад

I’m collecting them right now and plan to donate them at that years USTE in Williston FL. Most of them are crawler related stuff and Ryan Cornmesser runs a very nice Crawlers for Kids Charity so I’ll give most of it to him.

@randyaguililla6963 3 года назад

Exocaged RC awesome dude, I’m glad to hear that. I’m also glad it’s in Florida. I’m a Florida native and love seeing positivity coming out of our state. Keep the videos coming, one of my favorite RC content channels!

@jamesgfid1093 3 года назад

How long did it take you to get the diff cases ?

@ExocagedRC 3 года назад

about a week, he ships fast, sometimes its not so fast, you can contact Arthur on FB and order directly to get them faster

@jamesgfid1093 3 года назад

@@ExocagedRC vary cool I want them for my Outcast. The Kraton I want to keep it for racing dont really bash it.

@redblue40rc33 3 года назад

Vivaton is showing from China.....takes forever to get to the states....bangood took 88 days for hex driver bit set to ar-kansas....but I still like my sushi🤣🤣🤣🤣

@old-rcplane-phart 3 года назад

1! 😳😁

@ETAI106 3 года назад

I dream of Arthur at nights...😂🤣

@ExocagedRC 3 года назад

LoL 😂

@zomdrag5360 2 года назад

Let me know if anyone things what I'm doin is wrong or a good idea, I've been mixing red grease and wd40 on a bowl tell I get a consitansy that I'm happy with it seems to work but just curious what other ppl think

@modzilla74 3 года назад

Don't shorten it. Long is better

@ExocagedRC 3 года назад

I want backflips and more wheelies.

@modzilla74 3 года назад

Yeah I understand the reasoning. I guess I'm more impartial to stability and putting the power down on the ground. Have fun with the shorty. I'm sure u Will. peace ✌️

@redblue40rc33 3 года назад

That's what she said.... NAILED IT 😎