I recently purchased another used Kremlin 10:14 pump and Kremlin MX Airmix spray gun. This video is just an overview of the two different pumps and spray guns. There is also a short demo of the two se
When painting Residential Cabinets, this is the best setup. I painted cabinets for three years with the Kremlin pump and Xcite gun. We had hoses for different colors of paint. When spraying Sealer and Lacquer, we had a pump and gun for each of them. Expensive but awesome equipment.
Our shop has 2 Kremlin MX guns. Using ML Campbell magnamax finishes. As the lead sprayer. I am very disappointed in the volume control and fan adjustments. Both have been rebuilt, but have operated the same, before and after. Having tried a C.A. Technologies pump spray unit. We're switching.
hey Scott,nice production set up, do you thin the precat? fisheye or retarder?, I am spraying some now and there is always a small amount of orange peel when viewed at a angle, it seems to tack up before leveling like glass. Any ideas? (spraying with a pressure pot, with plenty of atomizing air)
Hi Scott, I was watching your video comparing the G15 and the Kremlin gun, comments are disabled. I have a Graco Ultra 395 airless pump and was thinking of trying to run it aa. Can I ask questions about it here? Thanks, Bill
Yes, providing it works and doesn't need a bunch of parts. Typically the throat seal is the most common failure ($100). If the throat cup fills up with the product you are spraying over time, the throat seal will need to be replaced, and depending on the condition of the rod, it may need to be replaced to ($150). Good luck. Scott
Watch for them on eBay. You may have to put a few dollars in it, but usually worth it. I also have CA Technologies 14:1 Bobcat, it's a great alternative at a lower cost. Thanks. Scott
+Tammy Peppers Hi, Depending on your location in the US, there are several distributors. Grapek Action (PA), Seneca Industrial (IA), High Point Pneumatics (NC), and Annex Paints (AZ. Thanks! Scott