@danielelninoerrante8203 yup Temps were fine only need all the other crap when you try for 700gh which in the end is cheaper to just get another ks0 ultra save power and more hash.
You might want to reverse the fan so it's not blowing into the exhaust holes. Your current config works well only if you remove the plates, as all the air exits from there instead.
Have you tried a factory reset since upgrading? New firmware still had the bug for me was fixed at first cause of the ip being set before the update so it just kept the setting.
sorry to say, voltage adjustments won't be available on ks5* models (though clocks will be.) Just like ks3* ones, we don't have tuneable power modules like the ks0/1/2s. We can possibly go all the way back to the PSU to fafo around w/ the rails, but i have no desire to kill someones $10K machine, so i'm not really keen on that. Maybe once i can get a really cheap 3* model, i can start playing with it.
Im not sure if I understand your viewpoint. You want more efficiency with kaspa asics??? My thinking is because kaspa has such high emissions you would ignore efficiency and try to stack as much kaspa as possible in the shortest amount of time
Early on yes but it is getting harder and harder to get now if you only have 1 or 2 miners sure go OC but you start stacking thousands of watts of hardware you want to cheapest power bill possible.
All the same just Swifts is pre tuned also settings vary on different machines so having the ability to change voltage and clocks is huge some need more power then others.
Hi @RabidMining i upgrade the FW but it said me that Unable to connect to fee pool. Clock / voltage settings removed until connection is available i put the pool of f2pool so the clock / voltage settings Unavailable
I downloaded the zip file of PBFarmers firmware but when I go into the files it has a readme (I read all of it), pictures, an ebz file and a ubz file, but nothing with the filename that you mentioned?
@@RabidMining Nope. I just googled the filename of the file you downloaded and found it. Idk why it wasn't working for me. Oh well, I have it now. Thank you!
Hello, Does anyone have a list of which voltage and which clock works well? I use the current OC firmware and an additional 5v fan. KS0ultra Best regards
@DanielOberhammer ahh each miner is different best to tweak yourself slowly increase the chip speed till it loses hash then add some volts keep going back and forth till your happy
See Open-source people ❤ Everything should be open-source when it comes to crypto, EVERYTHING. Don't trust, verify! (ALWAYS) 👍🏽 Please do not forget to make a little donation to PBFarmer (aka Ryan DUGAN) in order to support his hard work, don't be ungrateful ❤
I just tried a couple of times and it failed both times it was the right firmware for a ks0 ultra and I factory reset then thied to upload it and that was as far as I got
Using ICERIVER’s latest firmware, the Ultra “forgets” manually set fan settings when it loses power and reverts to 0% (sometimes I have to turn my Ultras off). Does anyone know if this release will retain the fan settings after loss of power?
