KTM 390 Adventure - Givi Airflow sliding windscreen full installation 

Great tutorial for dummies. I mounted the windshield om my KTM390 based on the video instead of the Givi instructions. Everything was clear, much more than the IKEA-drawings.

Ordered mine last night. Ive been researching windscreens for a while. This one really makes sense to me. Cant wait to try it out. Thanks for the review and instruction.

Thanks for showing the install, I’ve just ordered this shield so looking forward to a better on road experience. Thanks again and hello from New Zealand.

I put one of these on my 890, I knew as soon as it was mounted it was WAY too tall, at its lowest setting it blew the windstream a good 8" over top of my helmet. Meaning looking thru it all the time was how it was designed to work. A 220 dollar mistake on my part. Im 6 foot tall and this shield is built for someone closer to 6' 8" tall. Several other YT reviewers have said the same thing, while some only say "Its Great!". Its only money.

Great job on the install video. Looking forward to hearing how well it works for you.

The AF771 fits also on the KTM 200 Duke with making a couple extra angle brackets to fit under the instrument panel and the installation of a small smoked windshield (china made) modified to fit under the AF7711 bottom piece. Also is needed a set of steering handle/windshield brackets which fit exactly on the top windshield holes to make the installation solid. Its a professional DIY job and you must be up to the task. It took me 3 hours to install. It is a great windscreen and it really took of the pressure of my helmet and cut down the noise. The above video is a great help for installation thanks to this OP.

Thanks for video. Very helpful, as I just installed it on my 890 Adventure. Right off the bat the two long front screws bottomed out during install. I had to go to hardware store and purchase 30mm length. Other than that, very straightforward. I suspect it was a KTM spec issue, not GIVI. I'm 5'11". In the low setting, the Airflow is about 1 inch above my shoulders, just a little bit higher than the high position of the stock screen. I got some flow right at the top of my helmet. I am very happy with that as the stock screen was sending a massive amount of air right at my ear level, which was very annoying. The Airflow was very pleasant. Increasing the height gave more protection, but I like the low position best so far just because I prefer lower screens. This is a much better design than the MRA spoiler I had on my R1200GS. I am a happy camper so far. I guess I figured out why GIVI blacks out the lower portion of screen. There is a very annoying reflection from the non-blacked out portion towards the outside edges of the unit from my aftermarket running lights. I did not notice any unusual vibration or shakes, but my top speed was only 60 mph. I see in your comment section, you lost a screw. I will have to monitor closely. Have you tried loctite yet? Did it work? Any other issues?

Man, you are a lifesaver! My windscreen came WITHOUT the hardware layout and installation instructions- I would've totally been lost trying to figure out which screws and washers went where. The website didn't even have a downloadable version, just the stupid adjustment pics that any moron could figure out anyhow. And, you did an excellent job explaining which was which, and then how they went together. Only thing I would add is, be sure to tighten the two 3mm screws that go on each side of the GPS mount tower BEFORE you put the lower windscreen on- otherwise it's really tight trying to get in there to tighten them! Thanks so much, you just made my Friday evening!

Thanks for recording this video, I followed ur steps and installed it successfully

Thank you, just got mine, I will install it tomorrow, thanks for the tips and tutorial very well done !

Have one of these on my Suzuki v strom 1050, absolutely awesome, selling the bike soon to buy a KTM 390 ADV, was wondering if I could get one for the 390, then came across your video, guess what’s now on my shopping list.👍

I just mounted mine and I really appreciate your video. It highly helped me. I will try it this afternoon!!! Have a ride!! 🔥🔥

Great install, and I have time to order and receive mine as I too am snowbound. Didn't know of the Givi windshield though knowing the brand and ease of installation I sure am excited. So go snow ;) Thanks for the great video!

Looks great

Thanks for the vid

I have one on my Africa Twin. I find I like it in the lowest position because I don't like looking through the windscreen to see the road. It definitely helps shield me from the wind. It's also great to be able to remove the top piece for off-road riding. The install is more complicated (but seems more secure) than for the AT. Thanks for the video, I'm thinking of moving to a KTM390, and I was wondering about the windscreen options.

Thank u for share, you save me a lot of time

Great job we are also new. We are watching! Keep going.

Thanks!

Nice screen and install !! I will have to check Givi out as that is a much better than Puig one i have for my 390 duke .

Nice one.

Keep uploading very nice😊😊✌✌

Thank for your video, helped me with the installation.. Did you figured out what for is the two black spacers #10? I don’t understand where to put them..

Hello, thank you for sharing your installation with us 👍. I wonder what your thoughts are after trying it - 1. airflow/buffeting? 2.vibration of headlight & tft? Thanks, John

Hey, thanks for the video, it was extremely helpful as my Airflow came without the instalation instructions/hardware page you showed in your video. I noticed you are riding a Tenere now, did you replace your 390 Adventure?

Very cool. What’s the width between the two sliders?

So the million dollar question is, How Do You Like it? Are you happy with it? Would u buy it again or look for something else? Any buffeting? Is the adjustable worth it or is the touring model the way to go??

Awesome Video! Do you have any updates after a season of riding on how you liked it? On the fence of whether to order this windscreen or the puig touring for my 390. Thanks!

Thanks for the video, I just bought that windshield and installed today. How tight should we make glass connection ? as far as I see from your video, you tighten pretty hard, wouldn't it harm the washers ? I mean the main glass to metal part connection

any update?

Good video and information. Do you happen to know whether there is an advantage of this w/s over the Mad Stad? I’m considering one or the other and not sure which one is the better bet. Thanks.

hi, can you do a review on the Givi airflow

Hey mate. Looking at purchasing the AF7711 and I'm wondering if the D7711KIT (Mounting hardware) came with your AF7711 or if it needed to be bought separately. Cheers.

Some givi windshields come with a rubber trim piece that goes around the windshield. Do you know what the purpose of this is?

Sir , after installing this does your head light unit vibrates more than usual? Because I have installed a different brand visor and it shake when I go off-road. nuts are getting loose.

Do the locks seem to keep the screen in place pretty good? No sliding up and down easily? Are they metal or plastic?

hey man, any updates on the windshield for longterm review? also is there another color like smoke version?

So how did theis windscreen work out? Any buffeting?

Hi , does it really block the wind at 3 digit speed ? I’m 6.2 in height and wondering this will help me on high speeds

How much the price that Givi Windshield?

Hola , mi amigo, me puedes pasar el link de compre , gracias