Ktm Duke 200 oil change. Easy steps explained 

Glad to hear it! Thanks

few options 1. Buy a stand 2. Have someone hold it in correct position while you read the glass 3. Do it yourself, but keep a couple things in mind: leave your kickstand down in case your hand slips and bike falls that way... the kickstand will catch it., and if it falls the other way... youre on that side to catch it. Also know that when the bike seems to balance for a second if your grip is minimal and you can almost let go.. its centered on tire and bike is straight up and down... if your pushing or pulling on the handlebar with your hand thats holding the bike while your looking at the oil level its probably not centered

I’ve now sold the bike, but did occasional run some dirt roads and limited off road. It handled fairly well overall but obviously couldn’t get to crazy with the limited clearance.

No problem 👍

The $1000 phone can be perfect tool haha, music, flashlight, video or cameras to look in tight areas you can’t get your head, or in guess even help checking your oil 👍

Clever solution. Thank you.

Yes, this bike has a strainer at the plug and the filter on the other side

Idk, you’d have to check into that

About 1.5, check to verify you didn’t over or under fill when completed.

I purchased at the KTM dealer, but I’m sure you could order online

Factory

Drain a little bit out

If your checking it properly and its to high, and your nervous about adjusting, take it back and tell the place that preformed your service. They should adjust for free since their mistake. You can also buy a small hand pump that goes onto the top of an oil container. They are super cheap and look similar to the pump on top of a lotion or shampoo bottle. You can then pump some out from the fill cap (easier and cleaner then taking off your drain plug and trying to let some out that way).

Sounds like you probably didn’t get all the old out. A little left behind can turn the new dark