Kubota Pins and Bushes!

Подписаться 18 тыс.

Просмотров 37 тыс.

50% 1

Hey Guys
Welcome back to my channel, today I’m going to show you how we rebuilt the king post on our Kubota U17-3a mini excavator. This includes how to change all of the pins and bushes in the king post area. Hopefully it's all understandable. Feel free to ask any questions in the comments.
Thank you for watching.
⭐️All pins and bushes supplied by Digbits
👉www.digbits.co...
⏰ Video Duration: 13:18
ツ HOPE YOU GUYS ENJOY THIS VIDEO!
❤️ Please 🅻🅸🅺🅴, 🆂🅷🅰🆁🅴 and 🅲🅾🅼🅼🅴🅽🆃
👉Don't forget to subscribe & press the bell for more updates.
☺️🆂🆄🅱🆂🅲🆁🅸🅱🅴 🅽🅾🆆! rb.gy/conutj
..................................................................................................................................
📺Watch my other videos:
🔶HOW TO SERVICE A MINI EXCAVATOR!
• HOW TO SERVICE A MINI ...
🔶Ex-hire Rebuild.
• Ex-hire Rebuild.
🔶CAN I FIX THE DOZER???
• CAN I FIX THE DOZER???
🔶Thwaites Dumper Refurb
• Thwaites Dumper Refurb
🔶WACKER PLATE, WILL IT START?
• WACKER PLATE, WILL IT ...
🔶Garage Gantry Build!
• Garage Gantry Build!
🔶The Real Deal! Miracle Bender No3
• The Real Deal! Miracle...
🔶HOW TO: Workshop Air Line Installation
• HOW TO: Workshop Air ...
🔶Lathe Overhaul. PART 3 Colchester Student: Stripping, Cleaning and Assembling
• Lathe Overhaul. PART 3...
🔶Lathe VFD Conversion. PART 1 Colchester Student: 3 Phase to Single Phase
• Lathe VFD Conversion. ...
....................................................................................................................................................................................................................................................................
💢 🅵🅾🅻🅻🅾🆆 🅼🅴 🅾🅽 Social Media
💟 Instagram: / calamity.kim
💟TikTok: www.tiktok.com/@calamitykim123
--------------------------------------------------------------------------------------------------------------------
#U17kubotaexcavator #miniexcavator #kubotaminiexcavator #heavyequipment #construction #constructionmachines #constructionequipment #excavator #digger #CalamityKim #kubotau17miniexcavatormaintenance #oilchange #servicingandmaintainingaKubotaU17-3a #KubotaU17-3aservicing #changingoilKubotaU17-3a #heavyequipment #kubotaexcavator #excavatoroilchange #kubotaexcavatorservice #kubotaexcavatoroilfilter #kubotaexcavatorfuelfilter --------------------------------------------------------------------------------------------------------------------------------
Thank you for watching this video, click the "SUBSCRIBE" button to stay connected with this channel.
👉Subscription Link: rb.gy/conutj👈

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 156

@samparry9630 Год назад

Mucker didn’t work for the council at some point did he? He’s got the standing round watching others work down to a t 😂😂

@CalamityKim1 Год назад

Haha you’re getting a pin for this comment 🤣

@LordMuck Год назад

It's destiny - in life if everything is going smoothly then those in charge are doing their job well.

@exileinderby51 Год назад

That's brilliant, I wish I'd thought of that.

@davidgibbings6085 Год назад

Great vid Kim , hope mucker kept the suppling you with coffee while he was watching you work 👍

@772tsweet77 Год назад

The Naked Gun forehead slap slays me everytime.

@772tsweet77 Год назад

Update. OUCH!! Hitting your hand no matter the hammer sucks.

@seanworkman431 Год назад

Good job Kim, great to see Kurt gladly playing second fiddle, tidy little machine that should earn it's keep with ease. My hand was hurting watching you, them hammers f ing hurt.

@drewbarker400 Год назад

You did a great job there. Going to be interesting to see what mucker finds on the smaller one.

@Mudsuitable Год назад

I LOVE seeing couples work in the shop together! Getting my partner in the shop with me to do anything other than pumping the pedal to bleed brakes.. which he thinks is fun (go figure), he hates getting his hands dirty and god forbid he does anything remotely close to manual labor lol. You're very lucky to have each other, Thank You for the fun content!!

@brendanwhite9799 Год назад

Nice to see mucker being the gofor and not the boss 😄but he was not nice to you when he wouldn't stop laughing at you when you hit your hand 😆 😄

@CalamityKim1 Год назад

It was actually me laughing, I have a weird way of giggling before I start crying when I hurt myself 😑 it’s so bizarre.

@mikesmith-yc3os Год назад

Great video you and Kurt work well together

@TheGingerGenius78 Год назад

Nice work Kim ! That’s one of those jobs that take a bit of thought and effort but make such a difference to the machine ! Thorough testing and evaluation session too !

@RolandElliottFirstG 10 месяцев назад

Good work, it's probably better than new now, they had a bit of play in all the pins and bushes from new.

@peterfarbrace3604 Год назад

Great vid, so satisfying when jobs like that are complete - makes all the difference for the operator. Please do post the other sped up vid 👍

@tipperarymick5337 Год назад

Nice job 👌 It really does make all the difference when you have new pins and bushes 👍

@CalamityKim1 Год назад

Doesn’t it just! It transforms a machine!

@andrewforeman5716 Год назад

Great job Kimberly that's made such a difference to the operating of that machine.

@whitestream5233 Год назад

Excellent video Kim , you have given me inspiration to do the king post in my Takeuchi TB0 16. Been thinking about it for a while. Many thanks Kim .

@CalamityKim1 Год назад

It’s well worth doing and it isn’t to hard to do.

@bobpaterson1845 Год назад

Makes the job so much easier if done before the wear has worn out the bushes and damaged castings🙄😡 Dig bits have been on the go for a good while now we always bought our spares from them💪 great effort Kim good to see it back in working order 👌

@CalamityKim1 Год назад

Tell me about it. The tipping link was just to the point of there being nothing left on the bushes towards the edge. That obviously made it very difficult to get them out. Everything just kept getting wedged in the bush 😭

@bobpaterson1845 Год назад

You got them done 💪👌

@ianwallett7438 Год назад

Good job! Nice to see a machine having proper maintenance. 🙂👍

@michaelconway81 Год назад

Great job well worth doing. Nice wee machine now.

@johnhyde8892 Год назад

I got new tracks for my 2.7 ton Ihi last year from digger bits. All the sprocket and idlers came from some place in Wales all very good service.

@CalamityKim1 Год назад

Dig bits are great 😁

@johnhyde8892 Год назад

@@CalamityKim1 I got very good service with them, and very friendly.

@gmartin8240 Год назад

Well done Kim , I just watched Mucker's video on buying it . Once you get through all the jobs digger will like be brand new 👍🔩

@CalamityKim1 Год назад

That’s the micro. This is the mini digger. We have two 😬

@beakittelscherz5419 5 месяцев назад

Hammer my Fingers and doing Stuff Twice? "been there, done that" 😂😂😂 Nice Job, Thx for sharing👍

@ziptiesnbiasplies Год назад

Nice work lady!

@CalamityKim1 Год назад

Thanks Peg, Happy new year to you 💁‍♀️

@v666edd Год назад

Great video. Something very amusing about the speeded up footage 😂

@patkelly7999 Год назад

Great job Kimberly and Kurt, Happy New Year👍🙏🥂🙂

@progbloke6655 Год назад

Another job well done ! Happy New Year to you, CK.

@kenmurray4232 Год назад

Good video. I felt that hammer smash on the fingers here in Canada. Been there did that, hurts like the devil.

@robmatthews7972 Год назад

Good work Lady Muck, I still do not understand why UK people call the 'bushes' and here in the US we call them 'bushings'. I had to make a new king pin for my micro excavator.

@DigbitsCoUk Год назад

Bushes in the freezer is a great trick we've often recommended to customers. In the factory, when the excavators are assembled, certainly for larger stuff (10 tonnes upwards) they will have liquid nitrogen to chill and shrink them for fitting. The hollow ram is a very handy tool, for anyone running machines, something like that it a very sensible addition, but customers have had good results with home-made tooling using threaded bar and some old washers and bushes.

@CalamityKim1 Год назад

Hi guys, The hollow rams are also very affordable now to be fair. The bearing removal kit I bought has threaded bar with thrust bearing to remove pins. It does work well for just a couple bushes.

@jorgefernandez-mv8hu Год назад

That was a nice job well done on your part and I am amazed at how composed you were when you hit your hand with the hammer. I expected a long bleeeeep on the sound.

@CalamityKim1 Год назад

Thanks 😊, I normally go quite in pain, then start crying if it’s really bad 🤣🤣

@firemansam3902 Год назад

I spy with my little eye summat beginning with M -Mucker!

@ronniecumming7685 Год назад

Good vid Kim.

@andygraves3658 Год назад

Nice job Kim, and a guest appearance from someone lol. I know you also enjoy 2 wheels. I know these are small, got to start some ware. I have a Kawasaki BN125 and a Honda CA125 Rebel to work on. Need better weather, I don't have a shed or garage to work in.

@CalamityKim1 Год назад

Hi Andy, I do indeed love a motorbike. As you say, we all start somewhere, I started outside as well. Have fun with the bikes and stay safe!

@tomgriffin286 Год назад

Good job Kim.

@paulatkinson2849 Год назад

See Lord muck wimped out and brought in an expert to do the bushes I hope he paid u well for the work so skillfully carried out 😂

@davida.p.9911 Год назад

It was getting to the point where the spider web wasn't keeping it very secure anymore. 🕸 And so, repairs were needed. 😄 Good job, Kim.....and Kurt! 👌👍And happy new year!! 🎊🎉

@CalamityKim1 Год назад

I wondered who would say something about the spiders web, gold star for you 😬 ⭐️

@Peter-xm6ve Год назад

And ma Lord in a supervisor mucking about capacity, team work rules ok 👍👍

@philleggitt3005 Год назад

Kim the limit of my mechanical advice for your very competent work, where there is something that needs holding when you need to hit it with a hammer, let His nibbs hold it for you...As you have the build of a greyhound & he is more of a cuddle collie i reckon you should get out the door first... Grease guns, funny ole thing about them back in my days on the farm, always empty when i picked them up, that was in the days of loading them from a grease bucket... 🤪

@CalamityKim1 Год назад

I’ll pitch that idea to him 🤣 I’m sure he will be thrilled. If I end up with more equipment I’ll be doing just that with a 12.5kg drum, I’m going to start doing it at work with a spare drum we have.

@chrislovejoy8249 Год назад

Interesting video Kimberly.

@ClinttheGreat 11 месяцев назад

I, for one, would appreciate a longer video w/ explanations as to how you're doing the job. Some parts need to be sped through, but more explanation would be awesome. Overall good video.

@CalamityKim1 11 месяцев назад

Hi Clint, I must admit I totally forgot until the other day. I may get something done at some point. I still have the footage there to use.

@ClinttheGreat 11 месяцев назад

@@CalamityKim1 Thanks for the response. I just bought a Kubota u17 and your videos are a great help.

@chox2001 Год назад

Those hydraulic hollow rams look a nice bit of kit I’m tempted to buy one .

@CalamityKim1 Год назад

They’re so handy, wait till Kurt puts a video out in about three weeks to see what we’ve just bought. We will mention about the rams with some info. 😁

@chox2001 Год назад

@@CalamityKim1 thank you

@Rusty_Nickle 10 месяцев назад

I give you credit. I would have been speaking a ton of French after whacking my hand like that.

@CalamityKim1 10 месяцев назад

I giggle in pain then normally start to cry 🤣 I’m so strange.

@caerleon87 Год назад

Yes, do a video of the other pins..

@TheSynthnut Год назад

Wishing you a very happy new year! And there was me thinking it was going be someone else's fingers getting munged. Keep on truckin'

@JonDingle Год назад

Happy new year melady! Top job done there!

@CalamityKim1 Год назад

Happy new year to you too.

@leenewman4344 Год назад

The Alvin and the chipmunks dialogue is great. I hope you're not paying the apprentice he didn't even make you a brew!

@ricksmowers5094 Год назад

Great job Kim 👌

@trevorpearson1832 Год назад

Yes, enjoyed the video thanks. Happy New Year to you both.👍

@CalamityKim1 Год назад

And to you also 😊

@svernon7472 Год назад

Nice work Kim! Hope your hand is ok👍

@joschmoyo4532 Год назад

Excellent. Working on sub compact machinery can be more time consuming and fiddly. By and large though Kubota makes good kit.

@CalamityKim1 Год назад

Thanks, they really do. I’m impressed with the Kubota stuff we have!

@joschmoyo4532 Год назад

@@CalamityKim1 I have a BX23. I've worked it hard. But if you keep on top of the servicing they just go and go. Their engines and transmission's are very tough. I run mine flat out most of the time. 1800 hour's on the clock and it still doesn't smoke or burn oil.

@dustymiller7758 Год назад

Well done both, great entertainment. Happy new Year.

@iaingibbs9589 Год назад

Happy New Year don't work too hard and make sure somebody else doesn't work you too hard Best videos of when you and Lord mark got together on them Crawley's well done keep up the good videos

@markleigh3 Год назад

I enjoyed the video considering how reasonable the parts are plus the inclination and the workshop it is well worth doing with what you get in return ps it could be like George Saunders - rate my ditching, oh and don’t worry about running out of grease it proves you use it

@rolnics Год назад

Another curly wurly for the cameraman!

@CalamityKim1 Год назад

Only if he behaves!

@jeffh8872 Год назад

tip top lots of info and the hollow ram well done where did you get the hollow ram and the power pack { and the stepped press ] think you call it good work life is for living sore hands

@CalamityKim1 Год назад

Thanks Jeff, I got it all from Vevor. We got a new hydraulic hose set though which helped but wasn’t cheap.

@richieburrelltractionengin7801 Год назад

❤ your videos as always

@homeland5686 Год назад

I am a total new bee. Can you tell me where you got this bottle jack and screw set up as a set?? It seems that you pulled and installed these bushings so effortlessly If i could i would take home too, lol. How long and how thick is the bolt that you are using to pull/push thru the hallow cylinder? I have seen videos people welding bushings to angle iron and also grinding them down then knocking them out. Let me know please as i am totally new, I love the way you worked

@CalamityKim1 Год назад

Hello. I did do a short video on it at Christmas time. The ram came from zoro, the puller set was from eBay. I think the thread size is m20 or something. I got the largest thing that would fit through the bushes in the kit. Many different methods to be honest. I just do it this way mostly.

@homeland5686 Год назад

Thanks for your reply, I did find and watch your video from around Christmas time I did see the bush bearing kit, but it seems that the BOLT you were using is much much longer than it shows in the red suitcase bearing kit, ( just purchased vevor 20 ton 4 inch lift (100mm) stroke ram jack) and want to buy 180-cp hand pump so I am hoping this is going to work for me, if you have suggestion for the pull push bolt I would greatly appreciate it, trying to keep cost to minimum Ram Jack $66 hand pump 45, kitc will cost close to $100. Let me know thanks@@CalamityKim1

@JamesWhite-nv2lu Год назад

Great job kim and Happy new year 🥳👍☘

@showmethemuddy Месяц назад

How many hours are on this machine?

@geoffreymoore2204 Год назад

Good to see u left clip of hand an hammer in,as we have all done it,did u steal muckers boiler suit

@CalamityKim1 Год назад

No no, I have never worn his, I have a vast selection of my own 😬

@weedeatnogreweo7574 Год назад

Happy new year And a slight belated Merry Christmas Good vidja

@garethmcmahon9769 Год назад

Nice one Kim , once did an EX 30 makes a machine like new!

@CalamityKim1 Год назад

It’s a transformation isn’t it!

@Fanbladetowers Год назад

My wife wants to know where you got the sheep hat in the video we were watching and she’s jealous 🙂👍🏻

@CalamityKim1 Год назад

It was a gift, it’s from Lambland I think. 😊

@stevenclaeys6252 Год назад

Happy New Year !

@laytonphillips6667 Год назад

Great video Kim good to see it transformed, happy new year to you. About time you and kurt done another will it start together , ing send it !!

@DJC995 Год назад

Hi Kim Nice job happy new year Thanks

@codprawn Год назад

Great video but I would like to have seen you making new pins and bushes on your lathe!

@CalamityKim1 Год назад

I can’t harden pins and bushes at home unfortunately. Also, for the price of them it’s not worth it unless I need a custom size.

@stevengrieve678 Год назад

Good job kim

@EricWillis77 Год назад

As I sit here with a bruised left hand from the same accident I sympathize 😢Also it’s a good idea to use vicegrips for a punch handle. Something I should have done 🤷🏼‍♂️

@charleshart6992 Год назад

Excellent

@smiffy5467 Год назад

Good to his Lordship dishing out the sympathy when you hit your hand….. 😂

@julias-shed Год назад

Great job 😀

@celtic1522 Год назад

Kim how many hours has that mini digger done please and has it had a borer fitted for some time?

@CalamityKim1 11 месяцев назад

Hi there, sorry for the delay, I think it was 2900 when we did them. I don't think it's done much work with a breaker but I'm not sure.

@almclean4835 Год назад

Happy New Year Kim

@billupstateny9151 Год назад

Since this purchase is a partnership, was there any labor expenses w/ your helper, other than diner of course 👌

@CalamityKim1 Год назад

An exchange of kind words was in order 😬

@markallen6961 Год назад

Billy wizz, is that the new name for your assistant?🤭.

@Equiluxe1 Год назад

Don't know if it would work for those bushes but back when I used to be changing lorry spring bushes I would use the new one to push the old one out, that way I saved time as the new one went in as the old one came out.

@CalamityKim1 Год назад

I too thought about doing that and I think I did on a couple. It is mega fiddly with the ram setup was the main reason I didn’t.

@jonathantaylor6926 10 месяцев назад

How many hours were on the machine for you to need to do this?

@CalamityKim1 10 месяцев назад

It was pretty much 3k, the main issue was with the tipping link but I got carried away 😁😁

@kenwood8665 Год назад

as ever an enjoyable video

@gilbert7794 Год назад

Great video just need to get your apprentice Mucker to do more work 😂

@simonjones7785 Год назад

Pity Im not on the farm I had there was a full size forge there I could have cast you phosfer bronze to turn to size for that digger

@russdavis1960 Год назад

NICE!!!

@simonjones7785 Год назад

could you post the man of the hydrualic pin pusher you used

@CalamityKim1 Год назад

Hi Simon, I’m posting a video tomorrow with the details and some updates on that.

@pawerolka2162 Год назад

V dich done properly, girls power...

@100Jeanluc Год назад

I think this was the machine that Kurt spoke about in his last vid, certainly the way to go rather than buy a cheap chinese piece of shite. This thing will last so much longer too. Great work Calam.

@CalamityKim1 Год назад

Hi there, it isn’t actually, that will be aired very soon on his channel. Take care 😊

@billupstateny9151 Год назад

You stated the pins exhibited some wear. Any honing necessary to smooth burrs that might rub inside new bushing ❓

@CalamityKim1 Год назад

No no, the pins and bushes were replaced on everything, so it’s new surfaces on both parts the pins go through.

@claraholland-roberts6390 Год назад

Hi there could you recommend a puller for the bushes on a kubota u10-3. Thanks Clara

@CalamityKim1 Год назад

Hi Clara, the micros are a bit fiddly because the bushes are so small. I think I turned a sleeve in my lathe and used the hollow ram. I also used some 3/4” sockets from my set and that helped also.

@claraholland-roberts6390 Год назад

@@CalamityKim1 many thanks I'll have a go 😃

@steamfan7147 Год назад

About 25 years ago (after smashing the pudding out of two fingers with a maul) I learned to clamp a pair of vise grips on to the drift and use them as a handle when trying to gently knock the sh*t out of something.

@CalamityKim1 Год назад

I do that with small punches but find they get in the way on a longer punch. It ends up bouncing way to much.

@terencemckibben2330 Год назад

@@CalamityKim1 i welded an old front fork spring to a pin punch . takes the vibration out and moves my hand well out of the way

@simonjones7785 Год назад

I deffinitely need a bigger forge and crucible to cast those bushes

@Sidrcride Год назад

how many hours does that machine have?

@CalamityKim1 Год назад

It’s got just under 3k

@Sidrcride Год назад

@@CalamityKim1 wow, its in excellent condition.

@petefisk Год назад

Good work Kim, what was the choice of swear words..? 🔨🖐🤬

@CalamityKim1 Год назад

I don’t think I did swear. I was trying to prevent crying on camera 🤣

@alexthomas637 Год назад

😎😎👍

@R.Sole88109 Год назад

Kim you've done damn unfucking it.👍🏻 All the best for the New Year.

@R.Sole88109 Год назад

Apologies I did type damn good. But my phone is stunned like Willard

@CalamityKim1 Год назад

I must admit I was wondering what you meant but I got a rough idea haha. Thanks 😊

@benhoward4294 Год назад

There’s another ten million hours left in them bushes…😂

@thegreatnorthwoodswithbb2863 Год назад

Appears to be a lack of Grease

@CalamityKim1 Год назад

I think it’s more the amount of hours to be honest.

@alfadoofus Год назад

Good thing you had someone for some moral support , low morals to be fair 🤣

@theoriginalwelderpaul Год назад

First🤣

@CalamityKim1 Год назад

sat in the loft hiding still? 🤣

@stuartrance277 Год назад

I really enjoyed that video, makes it a lot easier with the gantry , it’s already earning its keep & keeping things a lot safer 👍👍👍👍The tool for removing the old bushes looked to be very handy, what’s it actually called ???? & where did you get it from ???? Thanks for making the film , would like to see the other video you weren’t talking about posting 😃😃😃👍👍👍

@LordMuck Год назад

Like a cavity insulated Grinch

@billupstateny9151 Год назад

@@CalamityKim1 Caught 👌🙊& he is NOT even a subscriber 🚽

@theoriginalwelderpaul Год назад

@@LordMuck It's my safe place. Itchy safe place.