Kyglaring Lego Ghostbusters Ecto-1 LED light sound kit 10274 Full Unboxing & Review

Подписаться 221

Просмотров 66 тыс.

50% 1

#kyglaring #ecto1 #LED #lego #timelapse #review #ghostbusters
Full unboxing, timelapse and review for Kyglaring LED and sound kit for LEGO 10274 Ecto-1 set.
Note: This set is NOT sponsored by Kyglaring. All reviews are my own personal opinion. I am not paid to advertise this product.
You can skip to the Full Review at 12:53
Link to purchase this kit is here : kyglaring.aliexpress.com/stor...
Instructions are available in this website : instructions.kyglaring.com/
Skip to the following:
00:18 Unboxing
01:21 Instructions (Website instructions.kyglaring.com/)
01:32 Remote Control Instuctions
01:39 Pack 1 (4 x white front headlights)
02:40 Pack 2 (4 x yellow front fog lights)
04:40 Pack 3 (2 x yellow front grille strobe lights)
05:27 Pack 4 (5 x blue + 1 x red beacon lights)
06:43 Pack 5 (2 x blue bar lights on roof)
08:24 Pack 6 (6 x red rear brake lights)
09:10 Pack 7 (3 x white cabin LED bar lights)
09:39 Pack 8 (1x white circular beacon lights on roof)
10:27 USB cable and 2 circuit boards
11:30 Testing the lights for the first time
12:11 Installing the speaker
12:53 Full Review
14:55 Sound No.1 - Engine starting
15:01 Sound No.2 - Horn
15:06 Sound No.3 - Blinking signal lights
15:11 Sound No.4 - Police siren
15:19 Sound No.5 - Ecto-1 siren
15:26 Sound No.6 - Brakes
15:30 Sound No.7 - Opening and closing the door
15:36 Sound No.8 - Emergency siren
----------------------------------
Thanks for watching my review. If you like this video, do consider to subscribe, like, and leave some comments!
Email : sgtoyhouse@gmail.com
Check out my Facebook page : / t0yh0use
Check out my Instagram page : / sg_toyhouse
Check out my Carousell listings : carousell.app.link/heevppBpxtb

Игры

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@sgbrickman7526 3 года назад

Firstly, this is not a sponsored product. It's my first attempt in installing a light + sound kit for my lego set. What do you think of this kit? Let me know how you feel about this! Should I continue to install light and sound kits for my other Lego sets?

@SW0000A 2 года назад

I thought for sure this was a manufacturer video. Lol

@simonsgoprovideos2840 Год назад

Amazing …I have this Lego set and light but mine is from lightailing ..without sound

@colinjamesphoto Год назад

Great video, it's the only sound and light set that doesn't have a video on the website showing off the sounds...thankyou so much for this 👍

@sgbrickman7526 2 месяца назад

There are many different variant of the kits. Some comes with only lights, some comes with lights and sound. Depending on what kit you buy.

@610Bricks 2 года назад

I’m currently working on the Ecto-1 and I think I’m going to have to pick these up. Very cool 😎

@wootuberhd2687 2 года назад

Love how you put the lights!

@volkerracho77 2 года назад

Thanks for your video and showing the error in the tutorial. Now I can also complete my project! Hope I get everything connected in the right order.

@sgbrickman7526 2 года назад

Glad you enjoy the video. :)

@daviddoyle2085 Год назад

I’ve just built mine. Brilliant kit. I’ve used a rechargeable power bank with mine as it eats batteries for breakfast dinner and tea.

@sgbrickman7526 2 месяца назад

Yes it does sucks a lot of batteries indeed

@jamesfrommanitoba.1992 2 года назад

10/10. Awesome

@user-ke1vi4fc7t 3 месяца назад

Bro I need to get the light kit right now!!!!🔥🔥🔥

@sgbrickman7526 2 месяца назад

go for it!

@shaynetainton7248 3 года назад

Firstly thanks for the video.. am currently installing this on my model. Quick question with the beacons approx 7.00 in vid.. ive threaded from front to back and at the stage to connect to the board but i cant work out if there is a specific position for each connecter so they run the correct sequence when all fitted etc. Ive marked the cables (front left outer/front left inner) etc etc. But wanted to make sure they go in correct place on board but cant work that out am afraid 🙈 Thanks for any help or advice. Its my first time and im not electrically minded at all 🤣

@christopherniceley8848 2 года назад

You made it look way to easy. I could never do this!

@Ecto-Ghostbuster 2 года назад

Hallo,vielen lieben Dank für das Video, das hat mir sehr geholfen 😍👌👻

@daisyhawkims4973 2 года назад

So cool dude

@thomasoder7869 3 года назад

Love this video! Thank you, but I just wasn't sure if you had to connect the remote before testing the lights. And I have also read that the battery box is not sufficient voltage to power sound and lights at maximum potential, but it seems to work fine!

@sgbrickman7526 3 года назад

Battery box has enough voltage and yes you can test lights without remote.

@thomasoder7869 3 года назад

@@sgbrickman7526 thanks so much for the video and response and everything! This has been very helpful throughout this process. Thanks again.

@levitra05 3 года назад

thx for the video that stupid mistake in the Instruction cost me an hour xD

@sgbrickman7526 3 года назад

I’m glad it helped you out. I too spent quite some time figuring it out.

@sinnedmp7090 3 года назад

Thanks for your video. On the final step (circuit board under the car) does it matter in which of the 8 plugs you put those cables ? if not how do I know which cable goes into which plug ?

@sgbrickman7526 3 года назад

I tried to follow the instructions as closely as possible. In my opinion, I don’t think it matters in which order the 8 cables go in. It’s likely correspond to the order of which you press on the remote.

@romainrgm5433 3 года назад

Thanks a lot for this perfect video. But how have you connect the remote control ? I can't make it... Have you problem for make it ?

@sgbrickman7526 3 года назад

Did you follow the exact steps in the instructions on how to connect the wires?

@johnb2458 Год назад

Hey, great video. Can I ask a question. I installed the same kit to my ecto one but noticed some differences to yours in the video. When you play the song my blue lights don’t flash or dim. Does it make a difference what plug goes into what socket on the pcb circuit board underneath?

@sgbrickman7526 2 месяца назад

It shouldn't make a difference. Try plugging into another socket on the circuit board.

@jodyeaster3524 2 года назад

Hi there I've connected everything but I a bit confused with circuit board 8 socket that sit under the car how do I know cable to plug in witch socket

@sgbrickman7526 2 года назад

Hi Jody. I don’t think the order in which you plug in the 8 wires matters. It probably correspond to the 8 buttons on the remote.

@SkylineRockLive 3 года назад

Thanks for the Video, i just can‘t seem to get the Remote connected and the Sound does not turn on, any Ideas?

@sgbrickman7526 2 года назад

Try to connect directly to a battery source instead to via a hub.

@fazlsoylu9473 2 месяца назад

Hello I buy the kit from amazon but i ve received only the adapter and a usb cable and other small cables which will enlighten the lighters but iam not sure if i received the correct set. What should i do? Return it back?

@sgbrickman7526 2 месяца назад

Check with the amazon store that you bought from.

@scottdibartolo6205 2 года назад

This video was excellent - you really clarified some questions I had from the instructions they proved online. I do have an issue though a - I can turn on the battery pack and everything comes on - lights, flashing, iconic sound but the remote has NO effect on anything. I already put a new battery in the remote but the only thing that makes the lights come on is turning the battery pack on. It then will play the siren for2 minutes or so and then reset all the lights and do it again. None of the buttons on the remote do anything (though the red light on the remote lights up when you push one. Any thoughts?

@sgbrickman7526 2 года назад

Sounds like the infrared module on your circuit board is not working. Contact their customer service.

@ohpooh2824 2 года назад

You need to hold the power button on the remote before you turn the power on and keep holding as you turn on power and the car should flash a few times and boom the controller works

@scappellos Год назад

@@ohpooh2824 I've got the same problem, I'll try it, maybe u saved me as I was going nuts! (I didn't know you had to hold the power button on the remote before turning on the power on the board! Cheerd pal!

@tamaskerekes543 11 месяцев назад

Super

@sharksean 3 года назад

Can I ask if your speaker is quite loud? Mines on the lowest setting and it cackles like mad! Think I have a dodgy speaker!

@sgbrickman7526 3 года назад

Yes the speaker is loud and crisp clear. There’s no crackling sound. Sounds like your speaker is faulty.

@hendrixnow 2 года назад

I cannot get the remote to work at all. I tried to pair it over and ove.r can u please help? not alot of info out there for this.

@sgbrickman7526 2 месяца назад

Check with your seller. It might be a faulty set.

@Moondoggy1941 2 года назад

Maybe a thought one video like this getting to the point, another video where it is much more methodical.

@dion6176 Год назад

I have a questions 1 i never done it before is it easy 2 is it a good product because it comes from alie express?

@sgbrickman7526 2 месяца назад

It's a good product. Most of the light kits I received are complete and working order. Only errors can be found in the instructions.

@raimyabdul1395 3 года назад

How long does the delivery takes to arrive in SG?

@sgbrickman7526 3 года назад

It took 3 weeks to arrive.

@Lingham 3 года назад

Hey im trying to follow your video but im confused at 10:30 mark where you say there is a mistake. Im really confused and tearing hair out haha

@sgbrickman7526 3 года назад

Yes there was a mistake in the instructions. The wires were connected wrongly to the circuit board in the instructions. You can check my video to see how the wires are connected.

@Lingham 3 года назад

@@sgbrickman7526 I tried but couldn’t see it quick enough 😂

@sgbrickman7526 3 года назад

@@Lingham In step 3 of the instructions, the 2 wires that are connected to position 4 and 5 of the expansion board should be connected to position 2 and 3 of the circuit board in step 10.

@opmechgamer1431 2 года назад

I dig it, but don't the lights compromise the functionality of the model

@sgbrickman7526 2 года назад

The lights and cables does not compromise the functionality. All the play functions still worked properly.

@loismillet 2 года назад

Can i use this with usb phone plug instead of batteries ?

@sgbrickman7526 2 года назад

Yes you can. However I would suggest using the battery pack instead as you can hide the battery pack inside the car and it becomes portable.

@hanssolomon 2 года назад

Just hooked this up and all lights just blink. If I hold the power button for several seconds everything comes on but there is no control Remote does nothing. Any help?

@sgbrickman7526 2 года назад

Change fresh batteries or connect the USB direct to a power adapter instead of a hub.

@hanssolomon 2 года назад

@@sgbrickman7526 Tried both of those and get the same results. I have not hooked up the sound yet. And also thank you for this video it saved me on the mistake part of the instructions as I watched this 3x before I started. So thanks again.

@hanssolomon 2 года назад

Hooked up the sound piece and that works but Remote still basically not functioning

@hanssolomon 2 года назад

IT WORKS!!!!!!!!!!!!!!!!!!!!!!!!!!! Again really appreciate your video and response.

@sgbrickman7526 2 года назад

@@hanssolomon Glad you managed to get all to work! It’s definitely a good light kit.

@frankalexander2598 3 года назад

Kann mir jemand die genaue Artikel beschreibung geben bei Amazon mit Licht und Sound zum bestellen mfg sladdy

@bluepho3nixx 3 года назад

Ich such auch grad. Glaube genau dieses Kit gefunden zu haben. Ich schau mir das aber später nochmal an. Muss leider noch arbeiten. Kann dann gerne bescheid geben

@bluepho3nixx 3 года назад

Den Fotos nach ist es dieses. www.amazon.de/dp/B08P1YH76V/ref=cm_sw_r_cp_apa_glt_i_F611VVE10CV8C6NPZH52?_encoding=UTF8&psc=1