LAGUNA TABLESAW FUSION 2 Assembly - Step-by-Step | The Mckeels

Подписаться 764

Просмотров 13 тыс.

50% 1

A step-by-step assembly of the #LagunaTablesaw
The new Laguna F2 and F3 Table Saws are unlike any saw on the market. Having the same quality demands earned through the original fusion table saw, the new fusion line will not only impress but exceed the expectations you have come to expect from Laguna. With a completely redesigned trunnion and arbor controls that focuses on buttery smooth controls and longevity of the saw, we are sure this is the saw that will give you the perfect rip cut for many many years.
Features
- 1.75HP TEFC Motor110V, Single-Phase, 60Hz Power Requirement
- Fusion Dust Collection System
- Cabinet Mounted Design
- Included Tools & Integrated Tool Storage
- Included 10 x 60T Carbide-Tipped Blade
F2 Features
- Full Cabinet Body
- Cabinet Mounted Arbor
- Cast Iron Table & Wings
- European Hi-Lo Fence
- Premium Zero Clearance Throat Plate
- Fusion Hi-Low Dust Collection
- Fusion Over-Under Trunnions
- Reset Switch
- Quick-Release Blade Guard & Splitter
- Riving Knife Included
- Push Stick Included
- Miter Gauge Included
- Blade Changing Tool Included
- Integrated Tool Storage
- Premium Handles
- Included 10 x 60T
- Premium Arbor & Motor Bearings
F2 Fusion Tablesaw
Features
- F3-One-Piece-Cabinet
- Mounted Trunion To One Piece Cabinet
- The wheel system has been upgraded to cast polished hand wheel

Авто/Мото

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@jeffhildreth9244 3 года назад

Have you placed a straight edge on the table top and used feeler gauges to check for flatness front to back and left to right in particular ? I just returned a new Saw Stop because it was way out of usefulness for any accuracy. I am looking at the Fusion II and III. Thanks

@TheMcKeelsWoodworks 3 года назад

I have checked. It is within .001 inch. So far I am very satisfied with the fusion 2 table top. One thing I have noticed, is when I am pushing hard oak 1" thick, you must have a quality blade, or the motor will lag. But it rips ply wood like a champ! No lag at all...

@jeffhildreth9244 3 года назад

@@TheMcKeelsWoodworks Thanks very much.

@alsmith7316 3 года назад

@@TheMcKeelsWoodworks Nice saw. Are you using a 120v 15a, or 20a circuit? Or 240v? The 60t blade that these come with are not ripping blades. Not sure why they did not come with more versatile 40t blades.

@manofausagain 3 года назад

Did you check blade for parallel to mitre slots and fence?

@TheMcKeelsWoodworks 3 года назад

Yes. I did this off camera with a square, digital degree scanner, and actually out of the box it was within .05% error. For me, that is great! I am sure if you were a fine cabinet maker or working with small error parts, you may want to make some other adjustments. Can you think of anything else I should check?

@manofausagain 3 года назад

@@TheMcKeelsWoodworks tilt the blade at 45 degrees as well and see if it's parallel. Its actually is checking the tilt mechanism pivot is parallel to the top of the table if that makes sense. My cheap saw was out alot. It's a bit of a stuff around because when you get one close the other is out, so you go back and forth. I made a timber jig like an L bracket screwed to my mitre gauge to get my dial indicator as close to the table as possible. It is amazing what a difference a good setup makes. With a decent blade I now get an excellent edge square and true for glue ups. And after setting my stops a true 45 degrees. Oh set your stops to 90 and 45, I'm assuming it has them. Do a video!!

@TheMcKeelsWoodworks 3 года назад

@@manofausagain great advice! I'll make sure to make a video, possibly by the end of the month. Thank you for your feedback!

@Dincrivelfly 3 года назад

Nice video... I'm looking for a F II, where did you get yours from?

@TheMcKeelsWoodworks 3 года назад

@@Dincrivelfly Thank you for watching, supporting, and subscribing to our Channel! We got our LAGUNA from bistools.com Every year they do a promotion where you can get 10 - 20% off plus Free Delivery. We had to wait 8 weeks for us, but it’s been worth it.