LAKE COUNTRY SYSTEM 4000 PAD WASHER REVIEW! || IS IT WORTH IT?? 

Skus použiť apc a až potom čistiaci roztok

Couldn't agree more man!!! Thank you for taking the time to watch. Anyone who is doing some decent polishing will benefit from this system 1000%... keep pads happy !!! Hahaha, effective pads are going to cut down time also having it next to you to clean right after a pass. I'm very excited to use this on my next job!🤜🤛👍😎

Thank you for that tip! I've heard it works great. I've also heard the DIY detail rinselew works great aa well. I'm going to Try rags to riches and some rinseless since I have them already.. however I'll have to pick up some McKees 👍👍

That's AWESOME man! 👌 glad to hear your loving it as much as I know I will! Especially during a job. Keeping my pad fresh, clean, and cool🤜🤛🫡 thank you for taking the time to watch and leave your feedback. I really appreciate it!

Thank you Tim! Appreciate that brother. Definitely got a deal on this bad boy! VERY glad I pulled the trigger! Looking forward to putting to to work on my next job! 🤓 ohhh ya! Smart smurf! That's what I'm talking about!

100% agree! Any type of consistent polishing will benefit you so much with this setup.. very excited to put this system to work on my next polishing job👍👍 appreciate you taking the time to watch!

I'll be using various rinseless washes after this solution runs out. Agree... buying packets will get old lol. 👍 thank you for taking the time to watch!

Don’t buy packets- buy the mckees pad rejuvenator. Much more affordable and it all comes out of the pad and doesn’t affect polishing. McKee’s makes the snappy cleaner so it’s exactly the same.😊

👍👍👍🫡👌

Thank you sir! I appreciate you taking the time to watch! Oh yes, was concerned for a second! Although it did I'll be using a liquid rinseless wash and a little rags to riches from p&s... I think that will be a great cleaner 👍👍

Hey Ronnie! 👋 to be honest all you need is 2 pads. That's all I use on a job.. not including testing sections with various different pads.. once I know what I'm using I will alternate between 2 pads, always blowing out after each pass. Once the 1st pad gets cleaned I spin it out and set it aside and grab my 2nd pad. Continuing that process once that 2nd pad is ready to clean my 1st pad is ready to go. I've been doing that a while. Now, it's not the most time efficient this I know but this is just a side thing for me. People use multiple pads to help speed up and be more efficient.. this pad washer will be a great addition BUT not needed. I invest into some Lake Country HDO pads, or Rupes Pads, some quality pads before investing in the pad washer. Unless you have the extra cash.. it will come in handy mostly during a job keeping the pad clean, and cool. 🤜🤛 please reach out via Instagram if you have it...at papasmurf918detail if you have any other questions 🤝👍

I have definitely used my fair share of Ethos products! Some good some ehhh.. not as good. I used the old tire shine a while back like it but they stopped using it. I bet the new graphene tire dressing is pretty good. Something like the Adam's graphene tire shine.. as far as other detail sprays and protection.. I highly recommend checking out PhoenixEOD products.. great guy the owner with phenomenal products!!!! Also, thank you for taking the time to watch this video!

Couldn't agree more, Kim after polishing for hours on end. Knowing after your done on the last panel few pumps. Spin... and done! Really looking forward to utilizing this! Yes. That was the HDO ( HEAVY DUTY ORBITAL ) The key is the Grey portion on the back. It's a stiffer layer that helps the pad stay rigid and now sloppy when being worked longer cycles. Or, on the longer throw dual action polishers. Same exact foam though! Just added durability with the Grey section designed for the long throw units🫡 OH man! Purdy looked phenomenal.. very hopeful this year we can take it all the way! 😎👊

I have the same issue lol. Just spray a little waterless wash. ( with no protection in it ) then slide it in. Just needs a tiny lubrication 🤙

Thanks I'll try that

@bretbussey1806 anytime! Lmk how it works!

Yup! So I've heard works well! As well as getting the McKees pad rejuvenator which is the snappy clean haha. But either way.. this system really shines during a job. I'm excited to use it man!

Thanks brother! This System4000 setup is great I can't wait to put it to work!!!

Thank you Sir! 🤜🤛🫡 appreciate it! Hope you enjoy!

@@PapaSmurf918Detail great review brother. Love mine, I use it every time I polish. Haven’t tried rinseless in it yet, but bought a large container of the McKee’s pad rejuvenator and haven’t looked back. Hope you and the Smurf family are doing well 🙏🤜🤛

@alfredautospa All is well on the smurf front! Thank you. Yes, the snappy clean packs are I believe the pad rejuvenate from mckees lol. I'm wondering if rinseless paired with an Oz or 2 of rags to riches would be a good combo!

Yes, warm water does help! Thank you for taking the time to watch! 👍

Thanks brother! Haha oh yes. Although I've been doing it by hand for years. I'm kinda over it! This system lasts you keep a clean pad throughout and at the end BOOM! You must run or one time and done! I'm very excited to put it to use real time during a job. I'll definitely report back to all my followers🤜🤛🫡

I don’t polish everyday either but when I do I’m so glad I did.

Solid! Really, I job will pay for this. 1 good coating or enhancement polish. I think it's a great system. 👍

What's up brother! 🤜🤛🫡 yup! Exactly man, I agree. If your doing your own cars. 1 or 2 times a year. I can't justify having a pad system. But, I think for me it will suit me well during detailing jobs. Clean cool pads are the best pads😎👊 appreciate you watching man!

Thank you SIR! 🤜🤛🫡 Appreciate you my friend! Absolutely a must if you doing multiple corrections or enhancements a week. A clean pad... is a happy pad!🤣🤓😌👊

No I did not. I never do when I initially start👍 thank you for taking the time to watch!

Thanks man!!!! Most definitely brother. Getting up going outside and blowing out.. walking back in. Is be back on a panel already! 🙌 plus the dust lol. A happy pad indeed!🤣👍

Thanks Darrall! 🤜 🤛 I appreciate you buddy. 🙏 very excited to have this, and put it to use!👍

That would make this system THAT much better. It works great while you in the middle of a job. Just used it for the first time through a polishing a Harley and man.. 1 pad... cleaned and happy after each panel👌

Thank you, Marry! 😃 you'll absolutely love it. I've used it a few times now during jobs and it's really nice to be able to clean your pad quickly. Plus, at the end you're pads are clean! I don't care for the water missing all over though. I have to keep it away from stuff lol. It does fling. If they could someone somehow manage to keep it in the 🪣 bucket I'd be happier but it's not a deal breaker lol hope you had a great Christmas!

@@PapaSmurf918Detail why do I hear Jackee from 227 when you typed my name out? LOL!!!😆 was a wonderful Christmas. Hope your prime rib turned out great! Happy New Year!! It's going to be a great one,I can feel it☺️

@maryhoffman2547 😂😂😂 That's hilarious! Hahaa, glad it was great! Yes, I'm ready for the new year and all the new endeavors! 😃

These are there throwback uniforms 👍

@@PapaSmurf918Detail do you have the 2 gallon ik foamer?

@@kimnewling5728 I do not... I have the Marolex axle2000 and 3000

Hey man, there is nothing wrong with that opinion! I agree. It's not for everyone.. everyone has there ways brother. That's what these videos are for. Maybe to help that person that wants to get one. But wants people thoughts 👍🤜🤛 appreciate you watching my friend!

Big reason to think about one is the time saved, less product needed, and the degradation of the pads. Using compressed air ruins the cells in the foam, causing pre-mature end of life. The cleaner also increases lubrication and makes it so you need less product and no dry pad polishing. And money, saving cost of pads, money on time, and cost of compound/polish. 😊

All fantastic points 👌 and all in all will save time and keep pads happy😎😌

Thanks man! Absolutely.. totally hear you on the multiple pad method.. everyone had there way👍👍 I used to typically use 2 pads and clean and rotate throughout the detail.. but having 15 pads and a bucket of pads to clean is never fun🤣🤣 I'm curious on how this system will work so I'm going to put it to the test and report back after I get some jobs done with it🤜🤛 I appreciate you taking the time to watch, as well as sharing your process 🤝

@@PapaSmurf918Detail hahah....i get you bro. Sorry i meant that you can buy 15+ with the cost of a pad washer. I usually use 5-8 per car on polishing services. It takes only couple of minutes to wash them after and i feal i am lot faster and far more effective on the polishing using constantly fresh pads. Just..try may you like may you not,❤️❤️❤️❤️❤️ Keep up the great work, my greatings from Athens Greece

@Mdetailing ahhh I gotcha!!! Well, to each there own brother. Greece! I was just talking to my wife about how beautiful it is there. We'd love to visit there one day!

@@PapaSmurf918Detail i wish your wish will be true. Take care

@Mdetailing you as well 🤝

Absolutely a game changer!!!! Keep pads happy! And we all love happy pads! 🤣🤣🤣

Thank you Richard! 🤜 🤛

Wool?? Yes, it will clean a wool pad 🤙🤙 is a great tool to use during paint correction or polishing stage👍👍 thank you for taking the time to watch!

No way better to start the Day! Smurf'N ain't easy these days!

@@PapaSmurf918Detail 'cause smurfin aint easy!

@@barbara4944 🤣😌😎👏🤜🤛

Oh for sure! Sale price would make it a great buy! 👍 thanks for tuning in brother!🤜🤛🫡

Definitely agree. If your not doing much polishing then I don't see this fitting the diyer polishing once or 2 times a year. However if you are polishing often this will make the process much easier and more effective 👍👍 appreciate you taking the time to watch!

Morning! Enjoy the show!

Hey brother. Yes, I was very lucky to snag this thing up cheap. Although I had to pay 30 for FAB to ship it.. so I reality I wanna say it was Still 130ish bucks. I think it's well worth it though! 👌

@@PapaSmurf918Detail I’m not sure I have the dirt lock detail guard same as you it’s been working ok after I followed your pad solution you made

Yes, that is definitely still a great way to clean pads. Worked for me for a long time. However I really think this system thrives for as your polishing. Keeping the pad clean an cool. 👌 I can't wait to test this out on a job!!

Haha nope.. not related.

Let's good! Appreciate you brother. Figured I'd give a early morning video for those to start there day! 🤜🤛😌

Till you run out to my understanding lol. I have a job coming up that I'm gonna see how long it last. I imagine a long time. 1.6 gallons is a LOT as your not really pumping much each time. I'll be sure to do a follow up video 👍

It lasts me at least 3 cars and that’s typically two steps that are for dirty pads every wash. Buy the mckees pad rejuvenator since it’s the snappy packets. Great deal and goes a loooong way.

Appreciate your input man! Thank you for going through and replying. 👍👍 gonna get me some pad rejuvenator from McKees🤜🤛

It is a lil pricey yes. BUT I think if your doing corrections an enhancements often.. Will make the process so much easier. Now if your not doing much then I don't see a reason you can't clean by hand as I been doing for years👍

@@PapaSmurf918Detail made my own

@kelly-si2ho Yup, I made my own pad cleaner and cleaned by hand for over 3 years 👍

Morning brother!🤜🤛

@@PapaSmurf918Detail🤜🤛