Land Rover Locked KVM. Can't program new key. MCU Replacement.

Подписаться 426 тыс.

Просмотров 197 тыс.

50% 1

This video is Sponsored by Lock50 - JLR Transponder Key Copy & Programming Tool lock50.co.uk/
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ Need a repair? northridgefix.com/mail-in/
🟢 Sponsorship Inquiry northridgefix.com/advertise/
⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
===================================================
If you are local, drop in and say hello
NorthridgeFix
19365 Business center drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com

Наука

Опубликовано:

28 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 479

@mrstevepace Год назад

The clear coating is called a conformal coating it is used to protect PCB’s and components from moisture/liquid damage. There are chemical conformal coating removers widely available on the market. This stuff was the the bain of my life when I worked repairing aircraft avionics modules.

@ronlevin2339 Год назад

Acetone to CHCL3 will probably do the work, anyway anything under the chip cannot be removed by a solvent

@vijayreddiar1661 Год назад

I had also suffer from this but I had cleaned with petrol those coat were remove easily but I can't understand what type of coat was done by company 🤔🤔🤔

@OpenYourMind80 Год назад

conformal coating can be removed with IPA sometimes, depends though as there are different types. The one we used would come off with IPA no problems, or Microcare heavy duty Flux Remover

@zarko71 Год назад

You can use toulene or epoxy dulient it will melt the resin off 100% guarantee...

@WarkWarbly Год назад

Lemon Juice and (store/shelf/.3%) Hydrogen peroxide or fingernail polish can be used if you don't have Acetone or remover, or if it's late and stores are closed. Still needs a bit of heat to activate though... Or if you live in Alaska and don't have reliable access to places like Amazon or other online stores. The lemon juice and h2o2 mix has to be thoroughly cleaned up though because it will cause corrosion and will short the board. So clean with soapy water and a soft tooth brush, then rinse thoroughly, then rinse thoroughly with IPA.

@scotts4125 11 месяцев назад

I have a story about one of these. I am also an automotive locksmith. We run a lot of calls. This vehicle requires a lot of work to make the key. If we have to take things apart, remove panels, instrument clusters, open modules we send them down the road. Range Rover is one of these. We had a customer call just for a lockout. We opened it up and her keys weren't inside so she towed it to the dealer. They told her we ruined her KVM by unlocking the car without a key. They wanted $2500 for a KVM and close to $1000 for the key. The lady called me not blaming my company but she didn't know what to do. I told her they were full of BS. I had the car towed out and another locksmith who does all the high end stuff programmed a new fob for $650. This lady was so thankful for me helping her out. I hate these dealers. Always telling customers false information.

@merlin5476 11 месяцев назад

Those main dealers love to rip the arse out of anyone. I had a customer that had a totaly flat battery, and the mechanical door lock never worked anyway, so he only used the electronic key fob, the call out service jacked his range rover up & temporarily put a power pack on the starter motor/ solenoid which gave him enough power to quickly undo the door.

@nestachanda6935 4 месяца назад

wow @@merlin5476

@robertpage2023 Год назад

Electronic boards are coated to prevent corrosion. Three types of coatings are; Acrylic resin Silicone resin Urethane resin (Polyurethane) To dissolve these resins there are solvents to do this with BUT you have to be careful not to also dissolve the PCB board as well. Acrylic resin can be dissolved with Acetone (very strong) and Xylene Use a Q-tip with sparing amount of solvent on it and mask area around the electronic component with painter's masking tape. Silicone resin use Dicone NC-9 on Q-tip using same method. Urethane resin use Isopropyl 99% Since there is no way to know which resin was used, start with the Isopropyl to see if that works. If not then knowing that Acrylic would be the most obvious choice as a coating, I'd then use Xylene. But make sure you mask off the area. If no effect then use the Dicone. It is safe on PCB's

@harmeetsingh24199 Год назад

Thanks for your time 😊

@paschalokeke3216 Год назад

Wow good job in dishing out these information thanks

@bolter99 11 месяцев назад

PCB Board 😂 Sorry - bit of an inside joke

@arva1kes 11 месяцев назад

The most importand question about it is not how to remove it or "he does not like it". The question is why it is not put back on. it can be just a coat of clearcoat. Car needs this for moisture and humidity changes. I understand the hate , but it it there for a reaseon and decent repair would end with that coat or similar back on there. Also thanks for good explanation.

@AnonyMous-jf4lc 11 месяцев назад

It's a thin conformal coating and not at all hard to deal with. I use plastic scrapers to remove the bulk of it.

@todormiroleskov8663 Год назад

It is always a pleasure to work with customers who understand and appreciate the efforts you are putting in order to make the job done. Another amazing video💪

@tylermcnally8232 Год назад

Bot

@douglashealy Год назад

I work for an engineering company that designs and manufactures custom electronics. A lot of our boards receive this conformal coating. Anytime a board needs to be reworked then acetone is used to strip the coating before soldering.

@paschalokeke3216 Год назад

Your information really impactful....

@tylermcnally8232 Год назад

Wow.

@Fuzzy-88 Год назад

MG Chemicals 8310A - Conformal coating stripper - Gel. Try that stuff out Alex! All the info ive learned from you im excited to pass 1% knowledge to you 💙

@inothome Год назад

Conformal coating is great for protecting PCBs from moisture, dust and corrosion. Surprised you don't have any of the conformal coating remover! Sometimes acetone or xylene will remove it too. But the actual special remover can be one more thing for you to plug as you repair. You can talk about the best soldering iron tip, best vise, the lights, the best solder wick, best flux, best tweezers, better than factory and best conformal coating remover. I'll give it three weeks before you discover it and add it to your store. 😉

@MAXS200 6 месяцев назад

Did he add it? :)

@jakapratama2590 Год назад

True. Conformal coating is a nightmare to all repair shops. There's actually a solvent that can remove conformal coating, but I forgot what. It's not even commonly used in the industry where they use conformal coating treatment for their customers. The purpose is not only to protect the board from moisture/liquid attack, but also most likely encouraged that the board is non-repairable.

@kokotajebka 8 месяцев назад

try MICROCARE SUPRCLEAN

@Dyaxxis Год назад

Good job with the conformal removal. A few RU-vid channels have various methods of conformal rework, one in particular is "Rework and Repair 'Conformal Coating Removal' " on the Paceworldwide channel. If solvents are suggested, it may be difficult to source if someone is currently in California. There's also a section in the IPC 7711/7721 titled "Coating Removal, Identification of Conformal Coating" which has suggested methods as well. Just my 2 cents.

@davidanderson7976 11 месяцев назад

I deal with this conformal coating daily- Use various products to remove it. I liked the BGA Blade idea you used under the chip but did have me nervous about a pads coming off. Obviously experience plays a part to not damage anything. The blade scraped the coating nicely as well without damaging anything. Definitely an "over come and adapt" situation. Nice

@farmdve 11 месяцев назад

What about yellowish rubber-like material that doesnt come off with Acetone?

@ScoopDogg 11 месяцев назад

@@farmdve leave it longer and it will

@tasos_at Год назад

You are the man for accurate soldering tasks!!

@technodaz 11 месяцев назад

I have a few lads that comes in all the time for small auto electronic repair and they're the customers I really like , they never ask for it to be done asap as mostly the part is either stupidly expensive or has a lead time of a few weeks to get a new one. They never complain about the prices and I'm very reasonable because It's little jobs like this is what I love , they hand you the board or part ready to go or I tell them look take it to bits and just give me the board or what needs to be done and I'll do it while you wait. I tried to charge a guy 10 euro once for soldering a new smd led onto a dashboard as he had it ready and 10 leds on a strip, he threw a fifty at me and left me with rest of the leds for next time.

@a13Banger Год назад

Another FANTASTIC video. Always love seeing pin by pin work

@aliyuabba4575 Год назад

Crisp, crunchy and satisfying. As always, nice video

@isaacclark9825 11 месяцев назад

The conformal coating has a number of advantages including protection from humidity, debris, and oil. Perhaps it might be useful to be able to remove and then replace the conformal coating. There are pen-like solvent applicators that allow spot removal of the coating.

@markwilladsen5683 11 месяцев назад

my razor blade works just fine. on motorbike eeprom the it's usually under a half inch of silicone, then all this bs on top of everything else.

@isaacclark9825 11 месяцев назад

@@markwilladsen5683 Not sure I'd want to try the razor blade on some type of polymer coating on a fine-pitched microcontroller IC. But not surprised that it worked for you.

@FlevopolderAviator 9 месяцев назад

A real craftsman at work, great job!

@saifal-badri 11 месяцев назад

Bro this is art not fixing, love watching your talent. All the best!

@mohamedarshad6207 10 месяцев назад

Miracle repair my friend. The polyurethane coat is a pain. But you did it brilliently. Good job

@sunnypatel1524 Год назад

I have worked on similar module and I have successfully made this mcu virgin few months ago. Without removing from the board.

@rowanballinger3690 9 месяцев назад

I loved the way that stuff scrapped off so satisfying

@rudibo8353 11 месяцев назад

Looks like a SPC560B60L3 chip. Made by STMicroelectronics. It is a 32-bit Power Architecture MCU for Automotive Body and Gateway Applications. Less than $11.56 for small quataties.

@kamilhorvat8290 Год назад

why not dissolve the conformal coating before using hot air?

@kamilhorvat8290 11 месяцев назад

@@JonnyMac351 yes, I did. He didn't even consider other options besides hot air and low melt solder. Some types of conformal coating can be removed with solvents like isopropyl alcohol or acetone. Since I've bottle of chloroform at hand as well, I'd test it too.

@freelander1794 Год назад

Educational and entertaining. Very good work. Thanks

@ThriftyToolShed Год назад

For repair work these conformal coatings are a real pain. I understand why they are used, but the silicone type is the easiest to work with. You very rarely even see the softer silicone type used these days. The worst for me is the full epoxy resin type potting. It's not even worth trying usually. You did an excellent job Alex without using a removal aid (chemical removal) it is very difficult to work with for sure.

@joseramos3076 11 месяцев назад

That was a real difficult job, very risky but you did it good. Congrats Alex

@tobiasmangoma9566 Год назад

Your experience make this very difficult job look simple

@TheRetiredtech 5 месяцев назад

We had that conformal coating on every thing we worked on in the Military way back in the 60s. Had none of the fancy tools and even soldered in electron tubes . The once you dig thru the coatings the traces would come off the PC board if you just looked at it. Different but still very difficult. Love your techniques.

@devonwilson5776 Год назад

Greetings. Thanks always for sharing your knowledge. Major appliances main boards are also coated with that conformal coating.

@SubjectiveFunny Год назад

Masterful work, as always.

@mornax Год назад

One of the tasks at my first job was applying a conformal coat to circuit boards. We went through so many rattle cans of Krylon! Nasty stuff. Breathing protection is essential.

@milkshake1993 7 месяцев назад

The customer is very generous, pays well and brings interesting stuff to work on and content for the channel 😂😂😂

@emraherten6079 Год назад

There are coating cleaning chemicals available in the market. You can get the job done very quickly with these.

@xrayy7 Год назад

There are Resin, polymer desolvers and solvents for this but you have to know what type of resin they are using and car manufacturers use several different kinds. But I would say you would find them on the internet. You might have to try different types to see which ones work and which ones don't.

@ctecrwp Год назад

Its clear varnish to prevent corrosion. Can be cleaned with paint. thinner. Same coatings on medical equipment boards also.

@griparian 11 месяцев назад

"Better Than Factory" and 'A work of Art.'... It's a pleasure watching the master at work...

@aspinx 11 месяцев назад

Yeah, only corrosion protection is gone now. Better then factory :)

@griparian 11 месяцев назад

@@aspinx ...but it's a work of Art...lol

@CTCTraining1 Год назад

Alex, have you tried any of the proprietary conformal coating removers like 8309? I think they need to be used outdoors so may not be practical for your area. Keep up the great videos and well done with this one. 😀👍 ... and if I’d realised the chip was the wrong way up I’d probably find something to stub my toe on before repeating the job.

@robertzerafa4806 11 месяцев назад

You should try using the grinding pen first to clean the crap of the pins, then use a low melt solder. That's the only way I found around it. Great video as always brother

@DavidGarcia-ob9dk Год назад

The solder blob techique by NF. Great work.👍

@kevintanaka4351 Год назад

Always a great learning experience, but you make it fun to watch, too! You may have missed your calling as a comedian😂😂

@hp2073 Год назад

When keeping the old component is not the issue, just cut the MCU pins with a fine and sharp tool to not to damage the pads, then remove the pins leftovers with solder and wick.

@leso204 11 месяцев назад

What i was thinking'

@jamesdemuro5923 Год назад

Great work as always 👍

@donald1056 Год назад

It's working out better than i thought it would

@michaelbraaten Год назад

When you are using low melt solder, do you change the temperature of your soldering iron or does it just stay balled like that regardless of the iron temp?

@barryhardington1523 10 месяцев назад

A perfect job as always.

@fernandoz6329 10 месяцев назад

Great work! Chemicals aside, what about using a square window aluminum layer to isolate all the components from the chip area. That could prevent 'browning' the chip surroundings...

@jeroenvtec Год назад

You did not gave up, nice job nice customer.

@toaf6467 7 месяцев назад

you sir, are an artist

@krnzzang84 5 месяцев назад

Solid work brooo, you da solder master

@888snuffy Год назад

Eid kareem ya Alex. Great work as usual.

@PineHollowAutoDiagnostics Год назад

Land Rover ownership is very expensive indeed! Amazing work! 😀

@AndyPearo 10 месяцев назад

I used to do that with a normal hakko soldering iron. As you said, flux makes it possible. In a pinch, I have removed old chips with knife and replaced with a weller gas iron.

@neverknowit11 Год назад

I hate conformal coating too! I had to re-spray it on the PC board after repairing it. I would use Acetone to clean the brown burnt conformal coating and re-spray the conformal coating.

@josephroberts6027 Год назад

Techspray 2510. 2510-P pint can 2510-N Pen about the size of a paint marker. Might be difficult in Cali! Pens can be ordered, but the pint cannot be shipped to a home address anywhere in the U.S. They also have replacement coating to replace it after you get done to end the job up... "Better than Factory" !

@jbluesb3southside 6 месяцев назад

Fantastic work a friend referred this to me

@mikatorkkeli4932 Год назад

Feeling the force the ball is :) Good job though!

@mariusdurbala6391 11 месяцев назад

I like your videos, left one solder ball near the chip😁

@Note_Creator Год назад

Thats amazing how that solder ball moves around.

@marcyd2007 Год назад

Wow, I've never seen that move before, where you dragged the solder over the top of the chip. You should name that technique, something like "Alex's Solder Shuffle", great stuff!

@JonnyMac351 11 месяцев назад

It's a very common technique used on surface mount chips.

@iuly111 11 месяцев назад

i work manufacturing electronic boards for 15 years, with our coat we use nitro anti-fog thinner or DOLPH’S T-200 to remove the coat. I don't know if is the same coat but workfor us, you have to put the product on board and let it there for 10-15 mins .

@hrashqtrades7816 Год назад

Today i too struggled badly, unfortunately i don't have blade to life the chip up. Later i will try again, this video helpful for me.

@SuperMarioDiagnostics 11 месяцев назад

Welcome to our world Alex, the automotive electronics. This is one of the easier ones Nicely done

@TheMatrixcube 10 месяцев назад

Damn i have some solderskills but this is next level ! Like factory appart from the coating discoloration ... 👌

@smarty0604 Год назад

I use a small amount of paint stripper apply with a small brush leave until it starts peeling then remove works a treat everytime , just make sure you remove all the stripper 👍

@wileecoyote4116 11 месяцев назад

you know your the best when you try to talk customers OUT of using your services

@adammahrousse672 Год назад

الله يبارك فيك اخي

@masongulizia9491 Год назад

Is this a plug and play situation with the chip or do you have to program it before hand?

@mm0077 Год назад

Great job.

@phogandivephogandive3885 Год назад

Your pin1 corner had the extra large feedthrough at it when you first marked it. Later it looks like you used a different corner as pin 1 when you soldered the new chip in.

@mira5751 Год назад

The solvent paint thinner is very good at removing the varnish but it can also erase any printed information on the chip also if thats the case

@zx8401ztv Год назад

Excellent as always :-D

@hubba002123 10 месяцев назад

how do you test a repair like this? plug it in and see if it smokes itself or whatever you plugged it into?

@dawn1berlitz Год назад

coudl this amtek flux stuff help remove solder from a ups like i need to solder back in a ground wire that broken off but im gonna make a slight modification that isnt the same as the disaster that APC did

@afridikhan7986 Год назад

Bro this cot removes with Acetone solution or isopropanol

@trilexfix 10 месяцев назад

Please let us know if the locksmith was able to get that board working after programming the chip.

@MoreReneRebe 10 месяцев назад

Solid. And less flux than Louis Rossmann ;-) mirror mirror on the wall, who does the shiniest micro soldering of them all, ...

@babukhan-tf5ww 10 месяцев назад

Bro very very nice effort I like it Only one thing I want to add if you donot mind that There are stuff available called conformal coating & conformal coating removal also. I am using those. One more thing I want to add that because it is used in a car in which many things can happen like rain ,vibration etc. so before handing over to the customer please do the coating overnight and then handover to him, Thanks

@adnanhaider5554 11 месяцев назад

❤ Lovely video ❤

@chandrakantbentur6966 11 месяцев назад

Interested to know whether the programming at customer end was successful after doing this .. soldering job

@kevinberry4949 Год назад

You sir are an artist with your talent for soldering .

@ispchiptuning 11 месяцев назад

Amasing skill Sir

@regi3.1 11 месяцев назад

Hats off man.

@elijahjags8949 Год назад

The Organic way; hehe...Good work as always

@huguess74 Год назад

The Land Rovers are designed to go in 1m of water, it is normal that the card is a varnish of tropicalization. Thank you for your patience and your videos.

@aspinx 11 месяцев назад

Not after this repair. It's prone to corrosion now.

@uteck7844 Год назад

Wonder full work bro

@Cleofizoid 9 месяцев назад

I use MG Chemicals 422C silicone conformal coating on PCBs in marine grade beacon strobes. It protects the strobe beacon PCBs installed on oil rigs in the Gulf of Mexico from water ingress and condensation. Luckily the boards are available and under $300 and just get replaced when faulty. But MG Chemicals does make a silicone conformal coating remover "8309" if necessary.

@paulhayes1134 Год назад

I have an amazing conformal coating remover made by mg chemicals 8310A, takes a few minutes to soften coating and wipe away, Job done.

@you166mhz Год назад

great job ...

@bbz149 11 месяцев назад

Does it not help by putting Capstan tape around the Chip to stop the coating around it from going Brown?

@excoauto Год назад

Hi Alex, did the LS manage to successfully reprogram this Land Rover KVM board?

@florianhofmann7553 Год назад

Wouldn't a little acteone and a q-tip to remove the coating beforehand helped a bit?

@E_Akbas Год назад

before the desolder you can try acetone or thinner, may be paint remover

@kedendukhedin7254 Год назад

"What I like about the solder balls is, it listens to me" - Me: Alex is the solder ball whisperer 😂

@3vlogs487 11 месяцев назад

I believe acetone will take off the conformal coating (edit: acetone may damage the board). I would apply new conformal coating as this is done to make the board water resistant. Without it corrosion can build up.