Laser etching stone? | Buddhist symbol on Sandstone 

Yes but need 4 letters and 4 numbers and a semi colon 1/4" to 3/4" based on project on flat sandstone for desk size plaques so how do I get that done???…. I’m not dropping 10 grand on a laser for occasional projects

@@drachenfeuer5042 sadly without one you'd have to find someone with a laser to do it for you ......

Hello. I'm interested in this as a business.. have a great idea for it too. Could really be lucrative... Are you still Lazer etching? I have a lot of questions.... Cost for starters.

اريد واحدة كم الثمن؟

Vry nice bro plz send me details of this machine

Thank you Ive actually done it with with sand but really like the bowl and rice idea!!

Can you share the hatch settings using ezcad2

No problem, a great tool that has certainly helped me grow a business.

The Laser I used for this is a fiber laser which runs n a different frequency etc. The longer appears to be a diode laser. I run 3 diode laser up toa 40watt and I don't think it would work real well on stone for a "deep" etch

I'm fairly certain the Fiber laser should work on any color. Though lighter colors may need some adjustments to settings.

The sandstone ones I do only take 5 or 10 minutes to get a deep enough engraving for what I was doing. Entirely depends on your time and what your looking to do if it's worth it. For me it was

Actually started using sand and or rice and that seems to work out pretty well. Will look at clay

Can you also help with hatch settings for 30w fiber laser using ezcad2

I worked with Pascal Liu from @haotianlasercnc (www.haotianlasercnc.com/) The one I bought from them 3 years ago is a 60watt MOPA

Not at home at the minute but in the description is Speed - 2500, Frequency - 45, and Power - 95% with 5 passes for a deep etch. .025 and snake in Ezcad

Unfortunately with this style of laser and ezcad3 not that I'm aware of

Not familiar with that type of stone. If it's a soft stone I d say yes you'd probably have to work on settings

Not at home at the minute but in the description is Speed - 2500, Frequency - 45, and Power - 95% with 5 passes for a deep etch. .025 and snake in Ezcad

Only takes about 15 to 20 minutes for a design, and depth that sizes

Ha! Stranger things no doubt

This is where I bought mine haotianlasercnc.com/ Worked with Pascal Liu

Thank you for the comment. Yep I can blow out the fan and such in the laptop which has been running in the same spot for several years, on top of the fact the black and silver hose to the left of gantry is the ventilation system which sucks out a good amount of the dust

I've offered parameters and help for people in the past and found that it becomes painful to try to help people that aren't willing to try to learn or test thier own equipment.

@@YourCouchsucks You did not answer my question. What is the benefit of this video if you are not telling about parameters values. If you belive, as you said, that people don't want to learn by themselves and so don't deserve the info, then why you did make the video.

@@persuitpersuit6662 showing people that a project is possible if they want to try it