Stop Throwing Out Failed Slate Engravings!

Подписаться 11 тыс.

Просмотров 27 тыс.

50% 1

Did you know that it's possible to re-engrave slate? In this video I show you how you can reuse slate coasters and test out a few different finishes.
Longer B1 Review Video: • Solid Laser...Once You...
If you buy using my links below I may get small share of the sale.
Longer B1 40 Watt Laser Engraver/Cutter:
amzn.to/3IbfEUW
Tools, Equipment, & Materials:
Twotrees Laser Enclosure 800x800x400 amzn.to/43nGsJG
12-Pack Slate Coasters: amzn.to/44MsyBP
Krylon Clear Coat: amzn.to/478ZnLi
PPE:
OD 6+ Laser Safety Glasses: amzn.to/43nTiYt
Disclaimer: The content presented in this video is for entertainment purposes only. The information provided is not intended to substitute or replace professional advice, and viewers should not rely solely on the information presented in this video. Viewers should always do their own research and consult with professionals in the appropriate fields before making any decisions based on the information presented. The creator of this video does not guarantee the accuracy, completeness, or usefulness of any information presented in this video.
#DIY #Making #Longer #LongerB1 #LaserEngraver #LaserEngraving #slate

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@EdHempstead 7 месяцев назад

Must be blind, can't find the link for Free Laser Learning Foundation

@hickser2272 11 месяцев назад

Thank you so much for this info . I have so many coasters I have failed on and now knowing I can reuse them , just made my day! Thank you thank you thank you !!

@LetsMakeAThing 11 месяцев назад

You are so welcome!

@steveo3012 Год назад

I appreciate the trials of different coats. I think I might try matte soon. When it comes to slate, I am havign a TERRIBLE time getting photos right. Can you do a tutorial on that? Or point me to one?

@LetsMakeAThing Год назад

Couple things I would recommend. Have you done a ramp test and made a custom focus block? Have you done any DPI tests to see what looks best with your laser? When it comes to engraving photos you need to have your laser settings really dialed in. I will add a tutorial on doing the image processing part to my video creation list!

@buddysmith7080 4 дня назад

Another great video. I can't find the link to the Free Laser Learning Foundation. Can you please provide the link?

@dwwoodbuilds Год назад

Really appreciate your "to the point, no fluf" videos!! Thank you Curtis!!

@LetsMakeAThing Год назад

You're welcome!

@quigleyscorner4881 Месяц назад

I'm just starting out, really appreciate being able to reuse coasters, I don't have to go to the craft store, order them and wait, no one else seems to talk about this. Thank you!

@LetsMakeAThing Месяц назад

Glad you found it helpful!

@rrudolph0011 9 дней назад

Great Video, Very informative! You explain things easily! BTW, Can't fine the laser learning Foundation resource.

@LetsMakeAThing 8 дней назад

Sorry, the eBook is outdated at this point and so it's no longer available.

@Grossvatti Год назад

Hi Curtis, quick note: If you don't want to use the spray use a rag with mineral oil - the thing you prepare your cutting boards with. Darkens fine, is food safe and gives good contrast when lasered

@LetsMakeAThing Год назад

Great tip!

@bigsubful 10 месяцев назад

Hello, oil used before lasering, I suppose. Is it right?

@ainttakenanyshit 6 месяцев назад

So, you think that a burnt on oil layer would be "good"? Me, not so much....

@okin8949 10 месяцев назад

Hi! I also like to reuse my "bad" slates, i remove the engraving by sanding, but i do a finish sanding with a 240 grade sand paper. This gives me a very even surface which can display more details than a raw slate. I never tried coating it before lasering - i use stone sealer after the engraving. These are also available in matte, silk and glossy. With the finish after the engraving i can protect the slate and also have the engraved areas sealed. This also avoids chemical fumes from the engraving. The output with sanded slate will have much more contrast than raw slate.

@LetsMakeAThing 10 месяцев назад

Thanks for sharing!

@daviddollard3845 11 месяцев назад

Nice video. Thanks for the tip on saving material. Preventing the waste is a good bonus for this too.

@LetsMakeAThing 11 месяцев назад

You're welcome! Glad you found it useful!

@gilbertboyer9936 9 месяцев назад

Hi there, I have been watching some of your videos and I am very impressed not only with the work presented but also your mindset and attitude. Thank for your great presentation and please keep them coming.

@LetsMakeAThing 9 месяцев назад

Glad you're enjoying the videos!

@Optikification 8 месяцев назад

Now this is great info, i started lasering a few months ago and have multiple ruining slates in my shed. Thanks for the tip.

@LetsMakeAThing 8 месяцев назад

Glad it helped!

@nancyperkins7267 6 месяцев назад

Definitely like the Matte finish

@LetsMakeAThing 6 месяцев назад

I think it looks the best too!

@ltsky311 5 месяцев назад

if you had a thickness sander this would take your time investment to as much as just throwing a bunch on the belt and walking away a few minutes.

@LetsMakeAThing 5 месяцев назад

Great point!

@iskrazpolski1715 11 месяцев назад

Hello. I have question i bought longer b1 30w. And why i cant for example make more speed then 9999 mm/s its not possible to put more value on my lightburn. Also it dont cut well i think i musted use speed 10mm/s and 100% power to cut 0.5mm wood with setup 2 times cutting. When i set up 30mm/s and 3 times cutting then it wasnt cutted... i dont understand this because probably it should be easy cutted on much higher speed. Maybe you know where is the problem? Also when i haved for example 300mm/s its showed shorter time to finish then on 3000mm/s??? I dont understand or im stupid

@LetsMakeAThing 11 месяцев назад

It sounds like you have Lightburn set on mm/second. If you're following my videos, all my speeds are in mm/minute. Try changing the setting in Lightburn to mm/minute and see if you get a better result. Since you have the B1 also check and be sure that you set the driver in Lightburn manually. If it auto selects the driver when setting up the laser it will choose the wrong one and cause issues.

@krisknowlton5935 8 месяцев назад

You make an enjoyable video to watch as well as educational. If you are going to laser engrave coasters for profit you should think about getting a fiber laser with at least a 30 watt output. Then you can pump out a coaster about every 50 seconds in which case resurfacing coasters is counter productive for sure. But I have been resurfacing coasters for about a year now because I don't believe in wasting material.

@LetsMakeAThing 8 месяцев назад

Thank you, appreciate the compliment!

@RobSandstromDesigns Год назад

Thank you. Have you tried using black paint vs. clear coat?

@LetsMakeAThing Год назад

I have not tried using black paint.

@chucklenz9011 Год назад

Nice and informing.

@LetsMakeAThing Год назад

Thank you! Glad you found it helpful!

@RobSandstromDesigns Год назад

Do you ever put a clear coat on after engraving - seems like my design is hard to see if I clear coat after engraving

@LetsMakeAThing Год назад

Yes I've clear coated after engraving. It works better on vector graphics as opposed to images where there is a lot of grayscale going on. Clear coating an image results in the image being difficult to see as you said.

@tomcollick8111 4 месяца назад

sanded to which grit

@LetsMakeAThing 4 месяца назад

I used 80 grit.

@ainttakenanyshit 6 месяцев назад

I believe slate absorbs/holds water, SO, you would need to make certain to DRY THOROUGHLY before you spray coat them.... A 170 degree oven for several hours/overnight would do the job.... It also would be a good idea to sand your new coasters if you wanted the very best to sell....

@Reverend_Funky Год назад

Well done good sir. Subscribed and looking forward to checking out your channel. Thanks!

@LetsMakeAThing Год назад

Welcome aboard! Thanks for the sub and I hope you find more inspiration on the channel!

@Reverend_Funky Год назад

I've been working with lasers for about 3 years and this video conformed something I was asking myself for a while. . I like the matte finish personally fyi

@LetsMakeAThing Год назад

Glad it was helpful! I am in agreement with you on the matte finish.