Laser Losing POWER?? Clean the lens!!

Подписаться 166 тыс.

Просмотров 8 тыс.

50% 1

Too many people say their diode laser is losing power. WHY??
Purity Lens Cleaner: amzn.to/3juZzAy
Please consider supporting companies that support this channel (affiliate links)
xTool.com site: store.xtool.com/?ref=Z7HBgvK5...
Easel: www.inventables.com/technolog...
X-Carve: www.inventables.com/technolog...
CNC4Newbie: cnc4newbie.com/store/index.ph...
FOXAlien: www.foxalien.com/?sca_ref=684...
Amazon: Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
STARBOND GLUE: www.starbond.com?rfsn=2376834.ca9c16
15% OFF PROMO CODE pawpawsworkshop15
DEWALLIE.COM: dewallie.com?aff=6
Made the Best.com: www.madethebest.com?aff=111
=============================
Support my channel on Patreon: / pawpawsworkshop
Direct donations support my channel: www.paypal.me/pawpawsworkshop
Comments or questions My email is:
PawPawsWorkShop411@gmail.com
Official Website: www.sainsmart.com/products/ge...
Link to Laser: jtechphotonics.com
CNC4NEWBIE: cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com/store/en/demon...
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases. Purchases that you make help to support my channel.
Sculfun S9 Laser: amzn.to/3KB018p
Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
FOXAlien 4040xe link: www.amazon.com/dp/B08M96HHKW/...
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ

Хобби

Опубликовано:

3 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@w1ckednessa Год назад

no sabia como limpiar y solo lo hacia por fuera con alcohol, gracias x tu video!

@jaredlunsford4438 Год назад

I love my xTool D1 Pro and Paw Paw has a link to it in his description.

@PawPawsWorkShop Год назад

Awesome! Thanks

@charleslamont2963 Год назад

Been using X Tool D1 Pro 20W for couple months. Had to request replacement limit switches due to originals being defective. Thank you for the cleaning instructions.

@PawPawsWorkShop Год назад

You’re welcome. Thanks for sharing and watching my videos

@SCC2345 6 месяцев назад

Do you have a video to replace the D1 pro 20 w laser diode lense? Not the replacement but the actual replacement with the lense on main unit?

@edmelzark1069 9 месяцев назад

Thanks for the information!!

@PawPawsWorkShop 9 месяцев назад

Your very welcome

@lunnymav Год назад

Nice video. Thank you for the tips.

@PawPawsWorkShop Год назад

Glad it was helpful!

@ericeinsmann5559 Год назад

Paw paw, you seemed adamant when you said "I don't use alcohol". Why not? My laser manufacturer (Comgrow) recommends using alcohol and a q-tip. Is there a reason why you don't use alcohol? Thanks!

@PawPawsWorkShop Год назад

Yes, I’m always concerned about contamination. 70% alcohol has 30% purified water. I would rather have a product specifically made to clean lenses. I just don’t want to take a chance of scratching the lens.

@kevinrich4637 Год назад

Thank you. I noticed my D1 wasn’t working correctly. I went to clean my lens but it was chipped. Ordered a new one. Hopefully that will fix my issue. Have a great day

@PawPawsWorkShop Год назад

I hope so as well. It unusual to have a cracked lenses

@mrsdizi1234 2 месяца назад

Thank you I did all that and even changed the lens and still no power have to do multiple passes or slower speed. before this has never happened any suggestions?

@nialzinth 7 месяцев назад

Interesting find while searching for lens cleaning solutions. I have a spray bottle to clean my glasses which seems to consist of mainly isopropyl alcohol. Might work as well but will do a little more research just to be sure. Most lens cleaning search results end up with 'isopropyl alcohol'.

@BrentGoodman_Rowshay 6 месяцев назад

Cleaning solutions for glasses contain a mixture of different types of chemicals. Stick with manufacturer recommendeds.

@4renzicfiles92 Год назад

Air assist really help you lense

@PawPawsWorkShop Год назад

Yes, I always use the assist now. You are correct, it helps a lot to keep the lens clean

@jasminea9536 Год назад

Does anyone know if the actual laser lens (the one exposed after removing the protective lens cover) is supposed to be loose? I cleaned that one and noticed that I could basically screw it either further in or closer to the top. Not sure what to do now to get it back in place.

@markshein404 7 месяцев назад

I have damaged my second lens on my d1 pro Is it the same lens as the first or did I damage the laser itself ” thanks in advance

@dwormkar4549 Год назад

Hey boss. keep up the great work

@PawPawsWorkShop Год назад

Thank you very much

@dwormkar4549 Год назад

What cnc machine did you use To make that beautiful eagle American flag.

@PawPawsWorkShop Год назад

This was done on the CNC4NEWBIE. Any of the CNC machine can run the same file.

@ericeinsmann5559 Год назад

Paw paw, do you have a link to the laser repair kit that you used in the video? I only see the glass lens by themselves. Also, do turn off the laser when you clean the lens? Maybe this isn't an issue for the lasers you have, but I had a little issue the other day when I was cleaning mine. On my laser there are two separate cables for the laser head, pwm and power. I unplugged the pwm cable while the machine was on and the laser came on full blast! Fortunately, it wasn't pointed at anything important and I was able to shut it off quickly. But someone else might not be so lucky.. Have a good day!

@PawPawsWorkShop Год назад

Wow, that could have been a serious accident. Whenever you are working on any piece of equipment always turn it off or unplug it. Safety first.

@rightpassage Год назад

After I plugged in my IR yesterday, & plugged back in the 20w. I have more power than I should? Meaning at P- 50% & S- 3,000 it burns threw a 1/2 in plyboard, and 33 mm bass is evaporated. I don't like it. I checked the settings, & reset it. 100%- P goes threw the table. I have an order to fill & I can't under these circumstances. Please help. 😣

@PawPawsWorkShop Год назад

I answered the email. You can check that out. Also, did the software ask you to do a firmware update when you turned it on?

@dwormkar4549 Год назад

Paw just wondering I want to buy a laser to start a small business at home. You have any suggestions

@PawPawsWorkShop Год назад

I like the xTool Pro. The newest laser is a 40 watt.