Lathe Duplicator - Set Up & Use of PSI Jig Ep.2017-38

Подписаться 11 тыс.

Просмотров 52 тыс.

50% 1

This video is about setting up and using the PSI Lathe Duplicator.
Index:
0:00 Introduction & Overview
3:12 Assembly of Lathe Duplicator
4:20 Mounting to Lathe Bed
7:27 Duplicator Assembly
11:32 Using Templates
17:15 Making the Cuts
20:04 Sanding
20:34 Finishing
22:17 Review of Finished Project
22:55 Summary
LINKS:
Links to Amazon products that I use and recommend.
www.Amazon.com/shop/GaryLundgrenCrafts
Clicking on this will take you to my Amazon Storefront where you can review, and purchase products featured in my RU-vid videos and that I recommend. Amazon pays me a small commission for items that are sold. This does not increase the price to you. Sometimes it may be less.
These commissions help support this RU-vid channel so I can continue to bring videos to you. I am in the process of building this, so check back often for new items.
-----------
www.GLCrafts.com
Follow me on Facebook www.Facebook.com/GaryLundgrenCrafts
Find me on Etsy www.GaryLundgrenCrafts.Etsy.com
Blog www.GaryLundgrenCrafts.wordpress.com
Twitter GLCrafts
Aligning Tip Axis sketch: glcrafts.com/Resources/Alignin...
Free PSI Lathe Duplicator DVD: www.pennstateind.com/store/CM...
While this is a few yrs old, it does give a lot of very good information that is still applicable today.
Plans and other information
glcrafts.com/Resources/resourc...
Links to Products Featured in my Videos:
PSI Turncrafter 10" midi lathe amzn.to/2EI2zEw
glcrafts.com/Resources/product...
DISCLAIMER:
Exercise good shop safety to protect yourself.
I may have safeguards removed in my videos, but that is solely for clarity to demonstrate a process.
Keep your safeguards in place to protect yourself from injury.
• Safety Glasses
• Hearing Protection
• Lung Protection
• Push Sticks and other Guides
Portions may be copyrighted by others.
All or Portions Copyrighted © 2017 by Gary W Lundgren, dba Gary Lundgren Crafts. All rights reserved.

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@robertcox338 6 месяцев назад

After watching this video I decided to order the Duplicator from PSI. Also bought pen, bottle stopper, and chess set templates. Can't wait to get them in. Plan to use an idle mini lathe as a dedicated setup for this device. Thanks Santa and others for the Christmas gift cards and cash that I used to purchase this setup, and thanks, Gary, for doing the video!

@GaryLundgrenCrafts 6 месяцев назад

Thanks for watching! Glad it helped you on making your decision. I often search for videos on a product before buying too. Very useful so long as it's not a sales job. Have fun! 👍

@VTHokies1987 6 лет назад

Very educational. You have an easy to understand delivery and your explanations are great. This answered my questions about duplicating. Thanks for your videos.

@GaryLundgrenCrafts 6 лет назад

Thank you!

@SCWD_US 4 года назад

Awesome demonstration!

@tombarnes1733 6 лет назад

Great Video Gary, have the same duplicator, but never really tried it out a lot. With this video will have to get it back out and put on my Jet Mini lathe. Saw a couple of things I might have been doing wrong. Getting new shop 14' x 24' setup with insulation and heat, should be ready in about a week. Once again great video and tutorial.

@GaryLundgrenCrafts 6 лет назад

Thank you! I hope you enjoy your new shop and using your duplicator. I found it to be fun, and a lot easier than I expected.

@fjnegron220 Год назад

Very Educational video from beginning to end including your ending quote: "If the women don't find you handsome at least they should find you handy" thanks for the life advice.

@GaryLundgrenCrafts Год назад

Thanks! Glad it helped you.

@MichelBricole 6 лет назад

Thanks alot !!!

@GaryLundgrenCrafts 6 лет назад

Thank you!

@JoseLecyCosta 2 года назад

Thanks for vídeo,Gary! Very good! José Lecy Costa cromo Pouso Alegre MG, Brasil

@GaryLundgrenCrafts 2 года назад

Thank you!

@kellyklaask7su990 6 лет назад

Thanks for the video. I was wondering...how thick of templates will the template holder accept? Could you put in a template that was say 1/4" thick instead of the 1/16" think that it looks like you are using? Or at least an 1/8"? Thanks!

@GaryLundgrenCrafts 6 лет назад

Thank you! I measured the max opening to hold a template to be about 1/8". You may get more by putting in longer screws, but probably not recommended. Thanks!

@kellyklaask7su990 6 лет назад

Cool. THanks for the prompt reply. I ordered one of these based on your review. I think I can cut some 1/16" acrylicl templates with my laser cutter. Looking at making different styles of chess pieces and don't want to be limited to what is commercially available. Appreciate your help!

@timharskamp6158 5 лет назад

What rpm's do you run your machine at for the duplicator and sanding parts? Thanks

@GaryLundgrenCrafts 5 лет назад

Thank you! I run the lathe at the usual speeds as for doing other types of turning. Smaller pieces such as pens I can run faster. Larger pieces slower. I know not everyone agrees, but this is what I learned and it works well for me. Shaping Wood and Acrylics 3500 Sanding Wood 500 - 800 Sanding Acrylics 1500 - 1800 Buffing 1200 - 1700

@albertoestrella5098 2 года назад

Hey Great Video ! I have a question for you do you know about the wood carving basswood carving Hen & goose eggs can I use this Lathe Duplicator to duplicate them on my wood lathe so I can wood tuning them myself please let me know

@GaryLundgrenCrafts 2 года назад

Thanks for watching! I've not used this duplicator for such projects as that. Basically when I want a new template for something I made, I have to sacrifice a product and cut it in half to get a form for the duplicator to follow. Make a metal template from that for durability and ability to mount in this system. Thanks! 👍

@tomberardo3282 Год назад

I purchased it in order to duplicate pepper grinders and salt grinders the average grinder is about 2 1/2 to 2 and three-quarter inches do you think I’ll be able to

@GaryLundgrenCrafts Год назад

Thanks! I would think salt and pepper mills would be easy to do as are various handles for ice cream scoops, pizza cutters, etc. 👍

@matthewwysocki5019 7 месяцев назад

Excellent demonstration. Thanks! How did the chess pieces work out?

@GaryLundgrenCrafts 7 месяцев назад

Thanks for watching! I apologize for delay in responding, Just had some cataract eye surgery done yesterday. I haven't finished making the chess pieces yet. Barely got started. COVID hit and a lot went to the wayside. I'm now getting back up on things. I'll post a video on making the chess pieces. Thanks! 👍

@guitarchitectural 2 года назад

This seems quite tedious to set up and align. Is there any way that you could register it on the lathe somehow so that it's quick to put on and take off, once you figure it out for your lathe! I love the potential here but if I set it up for a couple pens and then needed to take it off, then put it back later... Well, it might be quicker to just become a master Turner haha!

@GaryLundgrenCrafts 2 года назад

Thank you! Unfortunately this one doesn't lend itself to quick set ups unless you make pencil markings on things. Even at that I would think it would need to be tweaked a little with each set up. If you get any great ideas, let us know! We'll have our eyes open too. 👍👍

@gavster1961 6 лет назад

Gday Gary..can you post to Brisbane Australia? Thanks

@GaryLundgrenCrafts 6 лет назад

Thanks! Apart from RU-vid here, I wouldn't know how to.

@bryanwiitala7919 3 года назад

Could you set this up with a high speed router to make the cut?

@GaryLundgrenCrafts 3 года назад

Thank you. I think a high speed router would be too fast. Too dangerous. The most I run a lathe at is about 3,000 rpm. Most routers run in excess of 10,000 rpm.

@Cigarprop 5 лет назад

Have you tried this using acrylic?

@GaryLundgrenCrafts 5 лет назад

Thank you! I have not tried any acrylics on this yet. I expect it will work as well as with usual turning of acrylics. Actylics are more delicate and touchy. Avoid heat build up. Be sure to have a sharp carbide cutter. The carbide cutter I got for this I bought extra. It comes with a HSS cutter. Good for woods, but I like carbide for acrylics. Some may disagree. Thanks!

@Cigarprop 5 лет назад

@@GaryLundgrenCrafts Thanks for the info!

@tomberardo3282 Год назад

what is the largest diameter you can turn with this duplicator

@GaryLundgrenCrafts Год назад

Thanks for watching! I am out for a couple weeks so not able to set up at this time to measure it. But I would guess it depends on the furthest out the duplicator can be located from spindle center. That lathe has a max turn diameter of 10 inches. I would make a guess at about half of that with the duplicator.

@guybartlett9587 Год назад

Subbed Are the instructions in Spanish too? Thanks

@GaryLundgrenCrafts Год назад

Thanks for watching! I would suggest to contact PSI for instructions in Spanish. I would think they would as I think Spanish is the 2nd most common language on this planet. Penn State Insdustries. PSI. www.pennstateind.com You can contact them at 800-377-7297.

@jonharrington9545 5 лет назад

Skip to 18 mins to see the work

@GaryLundgrenCrafts 5 лет назад

Thank you! Thanks for the time mark so people can get to that part.

@aweisenheimer9567 8 месяцев назад

Good video. Still thinking on buying it to make chess pieces. By the way, I’ll take a Klondike?

@GaryLundgrenCrafts 8 месяцев назад

Thanks for watching! Those Klondike bar boxes, and others such as beer boxes, make handy parts trays. 👍

@aweisenheimer9567 7 месяцев назад

Bought duplicator. Watched video a few more times. Now to practice with some poplar.. Got plenty of small boxes and bowls that didn’t turn out the way I wanted for parts and such.

@GaryLundgrenCrafts 7 месяцев назад

@@aweisenheimer9567 Would love to see what you make. 👍

@aweisenheimer9567 7 месяцев назад

One thing I’ve found you may add, I have the turncraft commander 10-18. Have three different nova chucks… which would not fit as they hit the knob. Replaced knob with long machine screw. Made first practice pawn… need more practice.

@GaryLundgrenCrafts 7 месяцев назад

Thanks for the tip! 👍@@aweisenheimer9567