LAYOUT LANDSCAPING at Chadwick Model Railway | 229.

Подписаться 73 тыс.

Просмотров 37 тыс.

50% 1

Layout landscaping can be a daunting task. Here we ballast points, add the track infrastructure, and add nature, with weeds plants and bushes etc. This area now takes on a much more natural appearance, here at Chadwick Model Railway 229.
Patreon Link. www.patreon.co...
Donation Link. paypal.me/Chad...
Thanks to Dan Evason / tunnellane
Airbrush Links
Iwata Eclipse Airbrush amzn.to/3yEtkWJ
Airbrush Quick Release Couplings amzn.to/4aLwW6C
300 Paint Mixing Cups amzn.to/3Vl6Zqf
Extractor Booth amzn.to/3R1o5Xx
Accurascale affiliate link.
www.accurascal...
Hunt Couplings
westhillwagonw...
Amazon Shop
www.amazon.co....
Amazon Links.
Airbrush Links
Iwata Eclipse Airbrush amzn.to/3yEtkWJ
Airbrush Quick Release Couplings amzn.to/4aLwW6C
300 Paint Mixing Cups amzn.to/3Vl6Zqf
3M Pro Spec Face Mask amzn.to/44W0ygu
3M Disposable Face mask amzn.to/4bS9Cp1
Extractor Booth amzn.to/3R1o5Xx
Heat Shrink Tubing amzn.to/3PhMFTa
Cheap Solder Station amzn.to/48OHnpj
Track View Camera amzn.to/3UTf7OU
Dremel Cordless amzn.to/3IiMPWz
Sculptamold amzn.to/2Wh5RGr
Woodland Scenics Plaster Cloth amzn.to/3ENetct
16 Volt 2.5 amp transformer amzn.to/3KsJ17r
Plug-in Connectors amzn.to/3HvKvvG
Wago Connectors amzn.to/3kcWLb7
12 way Terminal Block amzn.to/39IZNd5
DCC Concept Wire Stripers amzn.to/3UFLCfy
WERA Screwdriver set amzn.to/2ZX0VJu
3mm Cork Roll amzn.to/3DTDGTn
Digital Spirit Level amzn.to/394f1LT
Brother ID Sleeve Printer amzn.to/3l7xmKL
Plug-in Terminal Blocks amzn.to/2zjyA3L
Layout Transformer amzn.to/3CuzF3g
WS Plaster Cloth amzn.to/2Zkm411
WS Smooth-it amzn.to/3aZ8IcK
WS Paving Tape amzn.to/3E7bLfv
Foam Cutting Pen amzn.to/3mS7Gqn
Hand Held Vacuum Cleaner amzn.to/3dmLekg
Bosch Hot Glue Gun amzn.to/2VWtK6X
Countersink Drill Combo amzn.to/2Z8R6Fj
Rotacraft Screwdriver amzn.to/3esNgxB
Swiftnut amzn.to/2TZ4GJ0
Gaugemaster Track Tester amzn.to/3eAbKp0
Ferrule Crimping Tool amzn.to/2TpJ4FU
8 way Terminal Block amzn.to/2Q7NxeJ
Magnetic Clamps amzn.to/2Nczc0y
Makita Drill amzn.to/2ZSJaLr
Polystyrene Cutter goo.gl/GpWgWp
Iwata Airbrush goo.gl/P1ABXd
Compressor amzn.to/2MKItc1
Com Art Paints amzn.to/2KFuDKn
Laser level amzn.to/2KRA5Y9
Helping Hand amzn.to/2qOt0Oy
Optical Visor goo.gl/ljSzBi
Magnifier Table Lamp goo.gl/seg8Dj
Fire Extinguisher amzn.to/34FEBCN
First Aid Kit amzn.to/2AhaWSk
Video Gear
Sony FDR-ax 700 4K Camcorder amzn.to/2URAYto
Lapel mic amzn.to/2ERkjtS
Zoom H1 Audio Recorder amzn.to/2O0CgKZ
Rode Microphone. amzn.to/2E7bc84
Sony camcorder. amzn.to/2SX1Y8z
Adobe Premier Elements.
DCC Shortcut Sheet
drive.google.c...
Scale Train Length Calculator
docs.google.co...
Chadwick Videos Spreadsheet
docs.google.co...

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 342

@kriso1891 3 месяца назад

Thanks Charlie another great video with plenty to inspire and motivate.

@ChadwickModelRailway 3 месяца назад

Glad you enjoyed it Kriso, it took 3 days to create and film! Regards Charlie for

@kriso1891 3 месяца назад

@@ChadwickModelRailway you can clearly see your hard work. But it pays off. I have enjoyed every video of yours. Thanks again for all your inspiration, insight and wisdom. It’s great to see that you are happy to show your mistakes. Makes the modelling that bit more accessible to all levels

@eamonnoconnor6664 2 месяца назад

Found it interesting that you just used scatter and not static grass, you still made hillside and side of track very realistic.

@ChadwickModelRailway 2 месяца назад

I think the static grass looks far better when close to the edge Eamon. Regards, Charlie.

@broxbourne22 3 месяца назад

To protect backscene when plastering or painting I use the liners from cereal packets split open and slipped between the board and backscene. Being opaque you can see them. Never failed yet and it’s free!

@ChadwickModelRailway 3 месяца назад

Now that’s a great idea BB, many thanks regards Charlie

@BobbyNomad Месяц назад

Great tip @broxbourme22 I always save the box for scratch builds but recycle the inners. Not any more. Just starting Version 8 of the layout in the garage. This tip will come in handy. Thanks.

@toots.007 3 месяца назад

On Cobalt iP Digital turnout motors you can Activate Self-Centering : 1. Put the switch into the “SET” position. 2. Set the address to 199. Then reprogram Not as easy as tortoise but it can be done.

@ChadwickModelRailway 3 месяца назад

Thanks Toots most helpful. Regards Charlie

@deskingdom6205 2 месяца назад

Charlie, I personally liked the plowed paddock on the hillside. Thanks,hope we see Branch line part 3.👏👍

@ChadwickModelRailway 2 месяца назад

It should be out on Friday Dom. Regards Charlie

@soheiltrains 2 месяца назад

Something that may be worth considering in the final product is that when a train is at a station, it will never lock its doors unless the signal ahead is clear. (Unless of course the train is not in passenger service.) Therefore, it may be worth adding a 30 - 40 second delay between the signal clearing and the train departing as this allows time for the guard to close the doors and (with permission from the dispatcher if there is one) dispatch the train. Note that this is the process used today, I don't know if this is what they did in the 70s but may still be worth considering. :) Nice video 👍

@ChadwickModelRailway 2 месяца назад

I was somewhat aware of the delay, though not so lengthy. However, if I did that in a video people would be soon signing off! Regards Charlie.

@soheiltrains 2 месяца назад

@@ChadwickModelRailway Certainly! The scene's really coming along though. 👍

@tri-clawgaming7682 3 месяца назад

I had never heard of the idea of keeping superglue in the fridge before. Always used to annoy me having to throw almost full bottles away.

@ChadwickModelRailway 3 месяца назад

Since I’ve been using the fridge, I haven’t thrown a bottle out in months. Regards, Charlie.

@MrAsBBB 3 месяца назад

I love Friday evenings. I get a chance to watch Charlie’s videos. I admire your enthusiasm and competence. So enjoyable.

@ChadwickModelRailway 3 месяца назад

It’s comments such as yours, that make the whole thing worthwhile. Regards, Charlie.

@EsotericArctos 3 месяца назад

I agree with this, except for me it is early Saturday morning as I am in Australia :).

@kriso1891 3 месяца назад

@@MrAsBBB i couldn’t agree more. I also love Charlie down to earth approach and humour.

@WesternSignalman 2 месяца назад

Love the superglue tip now I have an excuse for a beer fridge in the model room 😆

@ChadwickModelRailway 2 месяца назад

“Stick” to your guns WS. Regards Charlie

@BobbyNomad Месяц назад

Beer fridge in the new garage/train room. Great idea. Thanks for that.

@timsully8958 2 месяца назад

Hello Charlie! Great to see that scene developing nicely! 😎 The Mr Evason is a very clever chap indeed. He is also one of the nicest chaps you could want to meet. He is also fond of biscuits which is why I try to remember to bring some when I know he’s going to be at an exhibition as it’s a nice way to pass the time with a brew and a chin-wag 😅 Interesting you used Chinchilla sand. I was recommended it for use in yard areas to mix with coal dust to create a realistic ash and clinker coloured covering for yard areas. Even today in our yard at Shoeburyness much of the carriage sidings still give off an aroma of old coal and every now and then you’ll find a lump of the stuff! In fact, our yard has probably got about a dozen different grades and sizes of gravel in various patches and batches as ad-hoc repairs have taken place! 😄 Cheers mate, have a great week! 🍻🍀😉

@ChadwickModelRailway 2 месяца назад

Thanks Tim, for an interesting comment. Yes Dan is a delightful chap who is always cheerful. Regards Charlie

@stephendavies6949 3 месяца назад

An honest remark: when viewing your "transforming this to this" opening piece, along with your closing footage, I experienced a happy moment where I was transported back to the South Wales DMU services that ran through Merthyr Vale - my local station - when I was a boy in the 1970s. Superb scenery and camerawork, Charlie. I like the attention to detail. My latest obsession is getting steam loco lamp codes correct.

@ChadwickModelRailway 3 месяца назад

Thanks Stephen, that’s very kind of you to say so. Happier times. Regards, Charlie.

@BobbyNomad Месяц назад

Came back to this video again to check on the Hobby Craft paint. I went to our local Hobby Craft store (only one in the Scottish Highlands) and bought out their entire stock of brown. (All 3 bottles) and some green. I agree Charlie, good bargain price paint but lets keep it to ourselves (model railway community) because if Hobby Craft get word of it, they'll hike the price. lol. Great vid as always.

@ChadwickModelRailway Месяц назад

A good move, Bobby, I have loads of the stuff. Regards, Charlie.

@davidhinks8384 Месяц назад

Thanks Charlie, just catching up with your videos.

@ChadwickModelRailway Месяц назад

I do hope that you enjoy them, David. Regards, Charlie.

@davidhinks8384 Месяц назад

@@ChadwickModelRailway Thanks Charlie, I will and appreciate you taking the time to reply. I do hope you hit the 100k soon. I spread the news where I can.

@TATICMOOR 27 дней назад

Nice work Charlie, impressive results.

@ChadwickModelRailway 26 дней назад

Thanks tacticmoror That’s very much appreciated. Regards, Charlie.

@clemdye2996 3 месяца назад

I tend to use a battery powered hand held vacuum cleaner, rather than a full size unit, especially for ballasting clean-up. That way, I can re-use the product and reduce waste.

@ChadwickModelRailway 3 месяца назад

I still reuse the ballast Clem, just collected with a nylon stocking. Regards, Charlie.

@ashleybishop9937 2 месяца назад

If you put some nylon over the end of the "hoover" nozzle you can recover some material.

@ChadwickModelRailway 2 месяца назад

Yes, Ashley, that’s what I did with a piece of fabric. Regards, Charlie.

@hotdogpilot6319 3 месяца назад

Excellent tutorial Charlie, all I would add is to be careful of what you place (i.e. AWS ramps) in the 4 foot, there will be more than one loco that has low clearance and gives it a whack. Especially when using Kadee's. ATB.

@ChadwickModelRailway 3 месяца назад

Thanks, HDP, an excellent observation. Regards, Charlie.

@darrencarter7305 2 месяца назад

Coloured grout also works well on the sess if you apply dry then spray with water to cause it to harden.

@ChadwickModelRailway 2 месяца назад

Thanks, Darren, are useful tip. Regards, Charlie.

@andrewh6034 2 месяца назад

Nice work, look forward to the next installment. All the best for the 100K chase.

@ChadwickModelRailway 2 месяца назад

Thanks Andrew, but it’s still a long way off. Regards Charlie

@marysenatore8856 3 месяца назад

We're watching from CT USA . Completely enjoy your vlogs each week. My husband is building an HO layout AGAIN 😅! We watch you and Boomer Diorama faithfully and get lots of ideas. Thanks Charlie

@ChadwickModelRailway 3 месяца назад

Thanks Mary, so pleased that you both enjoy my channel. Stay safe, regards Charlie.

@wilton34041 2 месяца назад

Nice one Charlie, it certainly does a transformation. Just a small thing - I thought the Cess was the trackside drainage ditch not the path for the platelayers. See you next time, Phil.

@ChadwickModelRailway 2 месяца назад

I don’t believe so Phil, otherwise there would be one on both sides. I’ll try and include a construction image in the next video. Regards Charlie

@paulwilliams5903 2 месяца назад

I was interested about what you were saying about the storage of superglue in the fridge, and I want to add one extra thing. When you first open your superglue, add a little cooking oil to the thread that holds the one part of the cover to the other part. As superglue will not glue to an oily surface, it will keep the covers from sticking to each other and thus making the glue unusable and then having to throw it away. I do this and have no trouble at all. Regards, Paul.

@ChadwickModelRailway 2 месяца назад

Many thanks, Paul, for such a useful tip. Regards, Charlie.

@1701_FyldeFlyer 3 месяца назад

Great vid, Charlie with lots of tips. Cant speak about the MTB motors but you can set Cobalt digital and analog point motors to a centre position. For the analogs that I use, you just apply power then turn it off when the switch blades are at the centre position. For the digitals, you can reset the cv address to 199 (I think) and that will set the switch blades to dead centre.

@ChadwickModelRailway 3 месяца назад

Yes, FF, you’re dead right about the cobalts. Regards, Charlie.

@josefstadt80 3 месяца назад

Another great and inspiring video Charlie. Suggestion for the empty area between the passenger platform line (Platform 2?) and the goods yard - how about leaving the impression of sleepers in the ballast to allude to a lifted run around loop from steam days? Maybe also very rusty and overgrown track that was never lifted.

@ChadwickModelRailway 3 месяца назад

It’s interesting that you should suggest that Jose, it has occurred to me also. Regards, Charlie.

@douglasjenks8289 3 месяца назад

Hi Charlie, another enjoyable video. I was going to suggest covering the 2 surface point motors with a couple of redundant van bodies or BD type containers, but what you've done has worked well.

@ChadwickModelRailway 3 месяца назад

Thanks Douglas, sometimes the simplest answer works out quite well. Regards, Charlie.

@jeffjones6107 3 месяца назад

I really enjoyed that video. If i had used Superglue, i would still be stuck to the layout. Thanks for sharing, Charlie 👍

@ChadwickModelRailway 3 месяца назад

ThanksJeff, so pleased that you found it interesting. Be careful of your superglue, regards Charlie.

@davidparry1968 2 месяца назад

I love the signal box being strategically placed over the points, giving the appearance that the Permanent Way staff have absolute possession of the track section. Another informative and interesting video Charlie.

@ChadwickModelRailway 2 месяца назад

Thanks, David, I’m so pleased that you enjoy my videos. Regards, Charlie.

@TheSonofruss 3 месяца назад

With the background picture having lighter green grass there should be a hedge or blending between the hill and the background it looks very stark like the sun is shining in the background but not the foreground

@ChadwickModelRailway 3 месяца назад

Yes indeed. I can add the hedge now that the field scenic has dried. Regards Charlie

@hughoconnor9172 3 месяца назад

The very light green field gives the impression of a field bathed in sunshine - was that intended? It occurred to me you could put numbers on the relay cabinets and retaining walls to indicate the point numbers, as in real life. However, if they were to scale, they'd probably be unreadable, so maybe a silly idea!

@ChadwickModelRailway 3 месяца назад

You’re right about the colour of the field Hugh, it’s something I shall have to work on. Regards, Charlie.

@ChristopherLovett-l2j 3 месяца назад

Good video Charlie, great to see somebody NOT using static grass for a change, I still think ordinary flock looks better in a lot of cases.

@ChadwickModelRailway 3 месяца назад

I think you’re right, static grass looks best at the very front of the layout. Regards, Charlie.

@eastmidlandparkway6267 3 месяца назад

Great video charlie chadwick was an amazing layout before but when we start adding the tweeks and scenery it makes it come to life just been doing the same to beighton parkway what’s next for chadwick it will be great what ever it is take care mate Best wishes Kev Beighton Parkway Sheffield

@ChadwickModelRailway 3 месяца назад

Thanks Kev, I’m so pleased that you enjoyed it. It’s great to have you onboard, regards Charlie.

@shambo69er 2 месяца назад

Good to see someone else finds a good use for those empty coffee jars!

@ChadwickModelRailway 2 месяца назад

Yes, easy to view the contents too S69. Regards Charlie

@stewartclark1847 3 месяца назад

Always enjoy my Saturday morning breakfast with a cappuccino watching your videos Charlie. The layout is looking great. Been watching your videos for a few years now, so looking forward to watching the layout evolve. Rgds from Down Under.

@ChadwickModelRailway 3 месяца назад

Thanks Stewart, I’m so pleased to give you an enjoyable start to your day. Regards, Charlie.

@donsharpe5786 3 месяца назад

Another excellent video Charlie. I had a thought about the larger areas. You could mix in small green material so when you ballast the area there is the faint idea of weeds growing. You might be able to do this when you ballast track which has lower usage in some sidings. Thanks again Charlie and I love the mixture of topics.

@ChadwickModelRailway 3 месяца назад

Thanks Don, rest assured there will be grass and weeds added in the fullness of time. Regards, Charlie.

@philipbancroft 3 месяца назад

Thanks for the fabby and useful video. Having worked in railway maintenance, (not signalling) and also in all sorts of places, the cabinets are called "location cases" often shortened to "locs" pronounced as per the first part of the proper name. The cabinet at the left hand side in the Castle Cary shot is actually in the fence line and is a power supply cabinet with doors at the back behind the fenceline to allow Distributed Network Operators (DNOs) access to their equipment such as supply cable, meters and tails mounted on one side of the board inside. The other doors are for railway maintenance staff to access their distribution switchgear and outgoing cables. (Pedantic mode off).

@ChadwickModelRailway 3 месяца назад

Thanks for the information, Philip. As for the cabinet pronunciation, I use the shoe manufacturer Loakes. Regards, Charlie

@KingsviewModelRailway 2 месяца назад

That's exactly how we've done our layout, too! Sometimes, I use a bit of diluted PVA on those little bushes, which secures them better. Grab your wife's tea strainer for a larger area! Clean it, then put it back; she will never know! Cheers from Aus!

@ChadwickModelRailway 2 месяца назад

Thanks KV, clever minds think alike, hopefully ! Regards Charlie

@JWitchard 3 месяца назад

Hi Charlie, I used to work in the machine shop At Westinghouse Brake and Signal. The Peco point motor boxes are quite reminiscent of the ones they made. 😊

@ChadwickModelRailway 3 месяца назад

Oh, perhaps the West Hill Wagon Works ones are of a newer design. Regards Charlie

@JWitchard 3 месяца назад

@@ChadwickModelRailway I would imagine so. I'm going back to the 1970's and beyond. Best regards John.

@Tonyd5996 3 месяца назад

Goodness me Charlie. You are a true artist with your clever use of various materials. I can’t wait to see trains running around your layout once again. Thanks for sharing and encouraging so many people.

@ChadwickModelRailway 3 месяца назад

Thanks Tony, it’s comments such as yours and make it all worthwhile. Regards, Charlie.

@eastham57 3 месяца назад

Ultra informative as usual. I can’t help but imagine you got your schooling on how to be so instructive, from Blue Peter. No insult intended, you are just very informative and take time to ensure you get the correct information across to us eager learners. I look forward to receiving each of your posts. Keep up the good work. Regards Nick from NZ. ( Originally from Cheshire)

@ChadwickModelRailway 3 месяца назад

Thanks Nick, that’s really kind of you to say so. Good luck with your project, regards Charlie.

@Mel-127 3 месяца назад

Hi Chad. Where you use PVA, use Liquatex Matt medium. See what you think of the end results. (It doesn't break away after 5 to 10yrs down the line, either). Your layout is coming alive now. Nice work.

@ChadwickModelRailway 3 месяца назад

Thanks Mel, but I’ve never heard of that product. I shall see if it’s available in the UK. Regards, Charlie.

@Mel-127 3 месяца назад

Hoddycraft sell it. (Online too). It's not cheep though.@@ChadwickModelRailway

@tonywilliams9600 2 месяца назад

Well Charlie, you inspire such confidence in us to give it a go…..as a new modeller I’m really impressed in this retaining wall surface as the continuation or seamless expanse of the brickwork looks so realistic. Is this covered in one of the videos? Many thanks for your skill, generosity in sharing and encouragement.

@ChadwickModelRailway 2 месяца назад

Rest assured Tony, it is in one of my previous videos, but you will have to hunt for it I’m afraid. The walls are made by Noch, and are freely available on the market. Regards, Charlie.

@darrenhillman8396 3 месяца назад

Nice work Charlie! It would be nice to see a team of three S&T men walking along the troughing to one of your location cases… Remember they should be wearing mini-vests over pale blue bib and brace and dust jackets; full orange PPE with reflective strips wasn’t a thing until the 90’s! One of them will be the Lookout, so will need a set of flags with him. Also, how about having a spare stock and switch rail sitting on wooden baulks somewhere near one of your junction points? It would be there as a spare particularly where heavy switch wear might be encountered. The lineside hut is actually a lamp-mans hut - given you will have all colour light signalling, I would suggest this is made to look redundant! How about a Wickham Trolley for your Perway staff to get about on? I think they were still in use during your models era, but others more knowledgeable may be able to advise better. As S&T we would tend to walk along the cable troughing - we weren’t supposed to but when carrying bags of tools, etc, it made for an easier walk to the site of work, rather than walking on ballast which is quite uncomfortable underfoot, even with good safety boots on. I would love to see a modern panel box controlling your signalling - I think I did send you some photos of such some time ago. Easy enough to scratch-build rather than use one of the proprietary examples, I would have thought? Nice to see your superb layout coming to life - keep up the good work! As your tame S&T adviser, I shall continue to input advice where I am able to! Best wishes from Wirral.

@ChadwickModelRailway 3 месяца назад

Many thanks, Darren, your advice is very much appreciated. I shall look into acquiring suitably attired staff, and also the provision of trackwork spares. Stay safe, regards Charlie.

@Ron_Ventura 3 месяца назад

What a great transformation, Charlie. That area looks great. When I get to the ballasting stage, I’m thinking of trying chinchilla sand, but failing that, I’ll be using the WS Fine ballast. I’m in N scale.

@ChadwickModelRailway 3 месяца назад

Hi Ron, I do hope you can find the right coloured chinchilla sand. Regards Charlie.

@ianstransporthistorystuff8175 3 месяца назад

Brilliant.and it's really coming on , another thing you could add to the track is wheel flange greese machines, at my heritage railway I've been taught to service these , and to explain what the do for those who are wondering, as a train goes along the wheel hits a push button that realises some grease ( held in a drum by the track side ) on to the train wheel flanges.

@ChadwickModelRailway 3 месяца назад

That’s interesting Ian, I wonder if anyone makes such a device. Regards Charlie

@darrenhillman8396 3 месяца назад

Great idea!

@darrenhillman8396 3 месяца назад

@@ChadwickModelRailwayA bit of tubing and some stryrene will conjure one up, Charlie. You just need some good reference photos.

@JoeEngineersThings 3 месяца назад

I absolutely love the dummy switch cables! I always find the ground and surrounding equipment fascinating when I’m on a train.

@ChadwickModelRailway 3 месяца назад

Thanks Joe, I’m so pleased that you found the video interesting. Regards, Charlie.

@gralphirichmond2944 3 месяца назад

Keep your super glue in the freezer - it doesn't freeze and there is less moisture in the freezer - moisture is what causes your glue to cure in the tube/jar.

@ChadwickModelRailway 3 месяца назад

Thanks for the tip mate, I was using just the fridge. Regards, Charlie.

@bryan_lane 3 месяца назад

That little scene with the DMU departing looks pretty good in its new scenic environment. On the subject of “Relay Boxes”. As a young S&T technician, I spent the first ten years of my railway career walking up and down railway lines in and out of them while tracing line faults for various phones and S&T equipment. Your logic in their placement is spot on Charlie. However, if you want to refer to the. By their proper names, they are Location Cases, Locs for short (pronounced as in “cloak” without the c). Now, onto Cess walkways. In the days before around the 80s, it was rare for any kind of walkway to be provided in the cess and walkways that you refer to generally formed naturally in places were there was constant footfall from various railway staff. Incidentally, it’s not just p-way staff that ply the railway lines in the line of duty, but S&T staff, E&P staff amongst others. From about the early 80s, some attempts were starting to be made to provide walkways along the railways, one example I can think of was on the Brighton main line where walkways were constructed alongside trough routes (and well done for getting that right, many modellers incorrectly refer to it as trunking). But even on the Brighton main line, those routes weren’t maintained and fell into disrepair, disappearing into undergrowth or getting buried by the p-way in subsequent track renewals. So I think the Chairman of Chadwick Railways is a very kind and thoughtful manager to be providing his external workers with nice cess walkways 😁 And I see that someone else has already mentioned that it’s easy to set a DCC Concepts Cobalt iP Digital point motor to centre by programming it to reserved code 199. Finally, I’ve created a lift out board on my railway. I’ve used ModelTech’s ProTrack Aligners, they’re really easy to use, especially if you use them in conjunction with DCC Concepts alignment dowels. You can create a board that fits out easily and when you put it back into place, the tracks align perfectly. That’s it from me this time Charlie. Looking forward to seeing the continuation of the scenery on this area of your layout. Take care mate.

@ChadwickModelRailway 3 месяца назад

Hi Bryan, I do hope that all is well with you. Many thanks for your detailed comment. So, Relay Cabinets are known as Locs. Pronounced Loakes, as in the shoe manufacturer. That will confuse everyone. I do have those ProTrack board aligners, perhaps I should use then on the branch line board joints. My cess “look” is getting there but still not perfect. Only time will tell. Regards Charlie

@bryan_lane 3 месяца назад

@@ChadwickModelRailway Thanks Charlie, I’m doing well since my Op on 19th June. Another week or two of healing before I can get under my boards to continue the build but definitely getting there ! Yes Locs as in Loakes ! Not that I’ve heard of that shoe maker before ! If you’d like to see any photos of my lift-out board just let me know 🙂

@muskrat645 3 месяца назад

Hi Bryan, I was also an S&T technician from 1980 until 1988 on WCML at Willesden junction and Watford Junction and was similar comment. Also agree the cess was just the area at either side of the tracks, no fancy walkways. We called them Location Boxes. We also used bright orange tubes for the track circuit and point wiring that went under the tracks as Charlie has done elsewhere. Also the AWS's were yellow. With brown rust dust around magnet area for the old ones and never saw a black one.

@ChadwickModelRailway 3 месяца назад

Thanks for your comment muskrat. Regarding AWS does it stand for automatic warning system or audible warning system? Regards Charlie.

@bryan_lane 3 месяца назад

@@ChadwickModelRailwayAutomatic Warning System.

@neilharbott8394 3 месяца назад

It occurred to me that you could hide the breaks in the retaining wall with some form of climbing plant (ivy?). If you dot the stuff around so it's not too regular, might make the place look more natural?? Also suggestion for a short - how about a discourse on Facing Point Locks, and maybe where to find some 4mm representations??

@ChadwickModelRailway 3 месяца назад

Thanks Neil, I’d also thought about putting some drainage pipes on the outside of the retaining wall. Regards, Charlie.

@bertoverweel6588 3 месяца назад

Hallo Charlie, have you ever seen Luke Towan? I beleve you did. He is a master in making diorama's, I have learnd a lot of him working on my layout. Great video again.

@ChadwickModelRailway 3 месяца назад

Yes, Burt, I do follow Luke‘s channel. He clearly is a god amongst Modellers. Regards, Charlie.

@rosemorrison7075 3 месяца назад

Hi Charlie. Thanks for another lovely scenic update on your super layout.

@ChadwickModelRailway 3 месяца назад

Thanks Rose, that’s very kind of you to say so. Regards Charlie

@nigelnicholson7439 3 месяца назад

What a difference - marvellous.

@ChadwickModelRailway 3 месяца назад

Thanks Nigel, it’s very kind of you to say so. Regards, Charlie.

@darrenfawkner2018 3 месяца назад

Love it thanks for your video

@ChadwickModelRailway 3 месяца назад

You’re most welcome, Darren. Regards, Charlie.

@howardavins9234 3 месяца назад

Hi again Charlie What a difference. So realistic. A bit fiddly but well worth it. Thanks Stay safe. Howard

@ChadwickModelRailway 3 месяца назад

Thanks Howard, is a real step forward. Regards Charlie

@BeastyBill88 3 месяца назад

Looks fantastic Charlie! Amazing what results you get when you combine different techniques. I'll be honest I'm one of the nervous ones when it comes to ballasting especially has my shunting layout has a lot of points but I think I just need to take my time with it all.

@ChadwickModelRailway 3 месяца назад

I do understand you concern bill. However, if you ballast first thing in the morning, it gives you the whole day to exercise the points to make sure they don’t become too stuck. Regards, Charlie.

@SwissLogistics 2 месяца назад

Great inspiration Charlie. one of my favorite go to's for ideas.

@ChadwickModelRailway 2 месяца назад

Glad you liked it, that’s most kind.

@CAPNMAC82 3 месяца назад

On our old Club layout, if we needed to span over a register or similar duct work, we'd stand up some steep terrain in front of it, to higher than eyeline. This would then get a bunch of trees of the like to where you could not see down into the thing. We also would bend a metal mesh basket to fit the hole, so that nothing was likely to fall in and foul the ventilation (a lesson learnt the hard way).

@ChadwickModelRailway 3 месяца назад

That’s an interesting strategy, Captain Mac. Regards, Charlie.

@David-cq2mz 3 месяца назад

Hi Charlie…your layout looks absolutely fantastic,the details make all the difference.it always brings back memories of being a child gazing through the toy shop window at the layout you could never achieve. Gives me great pleasure watching your progress.

@ChadwickModelRailway 2 месяца назад

Thanks David, it’s great to have you onboard for the ride. Regards Charlie

@MrAsBBB 3 месяца назад

Thanks

@ChadwickModelRailway 3 месяца назад

Thanks MrAsBBB, that’s exceptionally generous of you. I’m so pleased that you enjoyed the video. Regards Charlie

@Beatlefan67 3 месяца назад

Blimey; that has really made the railway come alive Charlie. As for 'stealing' ideas - I prefer 'share'. After all, we all do it all the time!

@ChadwickModelRailway 3 месяца назад

Yes, indeed Beatle fan, we share the love. Regards, Charlie.

@alanhughes4178 3 месяца назад

Great work Charlie ! Another inspirational video! Love it when there’s an update from Chadwick 👍

@ChadwickModelRailway 3 месяца назад

Thanks Alan, that’s most kind. Regards, Charlie.

@akrills 3 месяца назад

I love to see actual, physical progress on your layout, and you have given us that with this superb update. Thanks, Eric.

@ChadwickModelRailway 3 месяца назад

Thanks Eric, I’m so pleased that you enjoyed it. Regards, Charlie.

@steveksi 3 месяца назад

The detail is what makes the layout. Very nice.

@ChadwickModelRailway 3 месяца назад

Thanks, Steve, you’re bang on the money. Regards, Charlie.

@steverowat2280 2 месяца назад

Highly impressive, Charlie! You set a high standard!

@ChadwickModelRailway 2 месяца назад

Thanks Steve, that's most kind. Regards Charlie

@SteveSmithRailways 3 месяца назад

I'd add some foliage hanging over the far scenery and then down the embankment wall to the ground as well.

@ChadwickModelRailway 3 месяца назад

I’m onto it Steve. Regards Charlie

@michaelimpey1407 3 месяца назад

Charlie, great progress on the scenics. I am not sure if you stole Dan's idea, but it is pretty much all over the model railway internet, that when doing a scene, you need to have at least 5 different colours / textures to make the scene look realistic, so great job, yours looks amazing along those walls. You are, as always very inspirational in your progress, thank you for sharing, and take care, cheers, Michael

@ChadwickModelRailway 3 месяца назад

Thanks Micheal, what Dan really did was to give me a nudge to get on with it. Regards Charlie

@quarryjunction-1969 2 месяца назад

As always great video, such a change from basic board to plenty of colour and people forget the amount of clutter and detailing that is track side.

@ChadwickModelRailway 2 месяца назад

Thanks QJ, I’m so pleased that you found it interesting. Regards, Charlie.

@mauracurran6500 2 месяца назад

Brilliant Charlie, amazing how some ballast and a little bit of greenery can transform a scene 👏👏

@ChadwickModelRailway 2 месяца назад

Thanks M6500 , I’m so pleased that you found it interesting. Regards, Charlie.

@hollyruston2444 3 месяца назад

Hi Charlie, "unthrown" and "thrown" turnouts are referred to as "Normal" and "Reverse" respectively. Trackside cabinets are called "Location" cabinets or "Lokes (locs)" colloquially.

@ChadwickModelRailway 3 месяца назад

Thanks Holly, I was aware of the cabinet terminology. Regards, Charlie

@keithphillips7320 3 месяца назад

I'm sure there is regional variation, but the 'cess (an abbreviation of recess) in the east of England was always made of cinders, of which there was of course no shortage in steam days. There's plenty available in model form too and the contrast with clean ballast looks good.

@ChadwickModelRailway 3 месяца назад

That’s a fair point, Kieth, but in the west country always seems to be light grey. Regards, Charlie.

@tomwheeler8728 3 месяца назад

I only like the classic signals that from the past

@ChadwickModelRailway 3 месяца назад

Sadly, Tom, time had moved on. Regards, Charlie.

@MrCoachman58 2 месяца назад

Hi Charlie. Have followed the progress on your layout from episode 1 ( although I must admit I was,a latecomer and only found your channel about 18 months ago) . I have been a railway modeller since 1963 ( on and off when other things have taken precedence) and I have to say that you have certainly inspired me to continue building my layout ( 12ft6 x 10ft6 in my spare room) now that I have at last retired from full time employment. Even though I only operate on DC I am thoroughly enjoying seeing the progress you are making on what will become a superb layout, Western region in all it's glory in the 80,s ( I am Western region steam/ green diesel era). I look forward to the notifications and have subscribed by the way. I know this is a long term project but am looking forward to seeing the layout improve with every episode, even the hints and tips such as airbrushing are very interesting ( love the bloopers, think we all do them and it is so amusing to see them, makes my day). The way you put things over and explain exactly what you are doing/ have done is brilliant, even seasoned modellers can learn from you. Best wishes for the future and keep up the good work,. May even cross paths at an exhibition somewhere in the S West one day where I shall shake your hand and say thank you for the entertainment and giving everyone the opportunity to join you in the wonderful world of Railway Modelling. Long may it continue. All the best Alan Jones

@ChadwickModelRailway 2 месяца назад

Thanks Alan, it’s comments such as yours that make the whole thing worthwhile. Regards Charlie

@Tez_Thorn1405 3 месяца назад

Wow Charlie, that looks really good now

@ChadwickModelRailway 3 месяца назад

Thanks Tez, yes it really has improved. Regards Charlie.

@tonyslight826 3 месяца назад

Hi Charlie ref AWS ramps i don't know if you are aware but some Hornby locos come with water scoops fitted to the bottom of the tenders do know if these AWS'S sit low enough to clear the scoops just a thought. I use sifted budgie grit of a certain colour. Well its all looking good Charlie and i will be ballasting my layout with in a week or so. another great video Charlie looking forward to the next one. Thank you

@ChadwickModelRailway 3 месяца назад

Thanks Tony, I’m so pleased that you enjoyed it. Fortunately, I have no steam locos with water scoops. Regards, Charlie.

@fredpryde8555 3 месяца назад

the layout is looking really good

@ChadwickModelRailway 2 месяца назад

Thanks Fred, it’s great to have you onboard for the ride. Regards Charlie

@bobstrainroom 3 месяца назад

Wow - looking good. Perhaps next time you are using white paint, place a dab on the bottom screws holding the L brackets on the shelf above. The brackets merge with your backdrop but the screws catch your eye.

@ChadwickModelRailway 3 месяца назад

A good point Bob, regards Charlie

@hermitageroad4713 3 месяца назад

well done Charlie a masterclass in scenics

@ChadwickModelRailway 3 месяца назад

Thanks HR, that’s most kind. Regards, Charlie.

@jacko9759 3 месяца назад

As always looking 👍

@ChadwickModelRailway 3 месяца назад

Thanks Jacko, that’s most kind. Regards Charlie

@KraigSickels 3 месяца назад

It looks beautiful Charlie !!!

@ChadwickModelRailway 3 месяца назад

Thanks Kraig, that’s most kind. Regards, Charlie.

@alancope9962 3 месяца назад

Loved it Charlie, and you never got stuck once 🙂👍

@ChadwickModelRailway 3 месяца назад

Thanks Alan, I’m so pleased that you found it interesting. Regards, Charlie.

@cykev1302 3 месяца назад

Thanks Charlie, always amazed at how much difference the detail makes.

@ChadwickModelRailway 3 месяца назад

Thanks Kev, yes it makes a world of difference. Regards, Charlie.

@glencwilson 3 месяца назад

As usual an interesting video with tons of tips. With super glue, I find putting a drop on a Pringles lid or something similar enables the glue to be used with a cocktail stick. Less risk of knocking the bottle over and it will stay useable for quite some time. Once the glue goes off just bend the Pringles to and it comes off,

@ChadwickModelRailway 3 месяца назад

I do the same Glen, putting superglue onto polythene. Regards, Charlie.

@thevagabond5966 3 месяца назад

Great video, as usual, Charlie. Just in time for me to start some ballasting and scenery. Of course I have a long way to go. - Chris

@ChadwickModelRailway 3 месяца назад

I’m sure it will work out just fine vagabond. Regards, Charlie.

@davidberlanny3308 3 месяца назад

A great transformation Charlie, the running scene was excellent you must be very pleased. I was thinking about what you might put in that abandoned area and I don't recall seeing a platelayers hut elsewhere on the layout, is there one somewhere? How did the cess work out in the end? All the best!!

@ChadwickModelRailway 3 месяца назад

I’m still struggling with the area myself, David. As for the cess, not so good. Regards, Charlie.

@StevenTT120Layout 3 месяца назад

Looks great. sorry I didn't get down to the show I had family to see to

@ChadwickModelRailway 3 месяца назад

Family first Steven, perhaps next time. Regards, char

@edwardbarnes2702 3 месяца назад

Brilliant Charlie, your such an inspiration. 🤓

@ChadwickModelRailway 3 месяца назад

Thanks Edward, that’s very kind of you to say so. Regards, Charlie.

@delphjunction1168 2 месяца назад

Hi Charlie. Great vlog. Love seeing you do your scenics. Thanks for sharing buddy. Thumbs up thumped 👍 .... Pete....

@ChadwickModelRailway 2 месяца назад

Thanks Pete, that’s most kind. Regards Charlie

@gregbowen617 3 месяца назад

Nice Video - a little bit of work makes a huge difference! Cheers and thank you...

@ChadwickModelRailway 3 месяца назад

Thanks, Greg, as most kind. Regards, Charlie.

@roystudds1944 3 месяца назад

Amazing what a bit of scenic work does to the layout. It’s certainly worth the time to do it. Thanks again for sharing your ideas. Getting motivation to get on with mine now. Just need the time. Roy.

@ChadwickModelRailway 3 месяца назад

Thanks Roy, I’m so pleased that i’ve provided a little inspiration. Regards, Charlie.

@gerlandkent6377 3 месяца назад

[looks, great]🙏

@ChadwickModelRailway 3 месяца назад

Thanks, GK, I’m so pleased that you enjoyed it. Regards, Charlie.

@richardkammerer2814 3 месяца назад

Wonderful work. I can see how I can make some improvements with my primitive setup, so thanks for another great video.

@ChadwickModelRailway 3 месяца назад

Thanks Richard, I’m so pleased that you found the video useful. Regards, Charlie.

@Consequator 3 месяца назад

This layout becomes more alive with every video, very interesting watch as usual. Also I forgot if this was a tip from you but I remember someone just putting like a cheap fine pantyhose in the vacuum hose, then add the extension piece to keep it in place and then hoover the freshly greened or ballasted track on low-ish power to catch the loose materials and be able to re-use them at a later point. If i recall correctly that stuff can be pricey.

@ChadwickModelRailway 3 месяца назад

I’m so pleased that you enjoyed it, Consequator. Yes, I have used that recycling method in the past. Stay safe, regards Charlie.

@gwrtromsoe 2 месяца назад

Charlie! :) This was yet another great video, and what a progress it shows! The devil is in the details you manage to get in, and an awsome job you do! Thomas, aka GWR Norway

@ChadwickModelRailway 2 месяца назад

Thanks Thomas, I’m so pleased that you enjoyed it. Regards Charlie

@anthonystevens8683 3 месяца назад

Some brilliant advice on this one Charlie. You've provided some great insight into rail side furniture that I hadn't considered along with the appropriate weeds. Great stuff and many thanks for sharing the method as well. A top job Charlie.

@ChadwickModelRailway 3 месяца назад

Thanks, Antony, I’m so pleased that you enjoyed the video. Regards, Charlie.

@stephenrushmer833 2 месяца назад

You did a great job, it looks very realistic. It’s given me some ideas for some unfinished areas on my layout . Thanks

@ChadwickModelRailway 2 месяца назад

Thanks Stephen, I’m so pleased that you found the video useful. Regards, Charlie.

@charlesrussell8137 3 месяца назад

That makes a huge difference to the look of the layout, it’s so much closer to the real thing. It’s amazing to me how much “stuff” there is alongside and in between the tracks. I admit I hadn’t thought of painting the surface mounted point motors and turning them into a clump of bushes, so I’ll have to give that a go shortly, you’re an inspiration! Cheers Charles.

@ChadwickModelRailway 3 месяца назад

Thanks Charles, that’s very kind of you to say so mate. Regards, Charlie.

@onnomulder9775 3 месяца назад

Another great video Charlie!!! Thanks again for sharing! Cheers Onno.

@ChadwickModelRailway 3 месяца назад

Thanks Onno, I particularly enjoyed making this one as well. Regards, Charlie.

@1089John 3 месяца назад

Thank you Charlie.

@ChadwickModelRailway 3 месяца назад

You’re most welcome, John. Regards, Charlie.

@andrewlaverghetta715 3 месяца назад

It looks great! These finishing touches are great to see placed, so seeing the clutter will be great. That's one of the reasons why I want to, almost, switch to HO from N scale.

@ChadwickModelRailway 3 месяца назад

Thanks, Andrew, but I feel your pain about switching gauges. Regards, Charlie.

@TheGazzz99 3 месяца назад

Great video - it's nice to see your layout from different angles I've not seen before

@ChadwickModelRailway 3 месяца назад

Thanks Gaz, I’m so pleased that you found it interesting. Regards, Charlie.

@robertharris461 2 месяца назад

What a great video and great timing for me as I'm at that same stage with my layout. I've watched so many of your videos Charlie it's like I know you which is great because I model on my own. You give me the inspiration to keep going. I've seen you at a few shows now but I'll try and get the courage to say hello at the next one. Keep the video's coming and thank you.

@ChadwickModelRailway 2 месяца назад

Thanks Robert, I’m so pleased that you enjoy the channel. Please do come over and say hello the next time you spot me. Regards, Charlie.