LB7 Injector Replacement for 2001-04 Duramax

Подписаться 761 тыс.

Просмотров 191 тыс.

50% 1

How to install Duramax LB7 Injectors
Subscribe: bit.ly/SubDeboss | Merch: debossgarage.com/merch
Watch next, “My Thoughts On The Cummins R2.8 Crate Engine” • My Thoughts On The Cum...
Canadian Diesel Pro Injectors www.kijiji.ca/o-profile/10022...
Duramax LB7 fuel injectror replacement for 2001 - 2004 Chevrolet Duramax Diesel
Follow Deboss Garage:
Website debossgarage.com
Instagram / debossgarage
Twitter / debossgarage
Facebook / debossgarage
Send stuff to "DEBOSS GARAGE"
411 Darling Rd, Canfield, ON Canada N0A 1C0
Other links:
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I like: kit.com/debossgarage/dg-toolbox
Show us your build project: debossgarage.com/drivetribe
Help us make awesome stuff: / debossgarage
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About Deboss Garage:
From American Muscle to Classics to Diesels, DG will show you how to build, swap, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.

Авто/Мото

Опубликовано:

5 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 295

@nate8234 3 года назад

Glad you gave those who are needing the visual knowledge to difficulty and the expected time that it takes to do this injector replacement job. One more big issue that I e found with these trucks is that you also may notice the abs and parking brake indicator lights come on and a DTC code be given for anti lock braking system fault detection, the simple fix to this issue is literally just an incorrect bolt used from factory that doesn’t provide the proper grounding as needed to the frame just underneath the drivers side area near where the body mounts to the chassis. Get a new bolt of better metal that will allow for better flow of grounding to the chassis and it will fully eliminate your abs/parking brake indicator staying on issue and trouble code to ever coming up again.

@kennethklaumann8799 2 года назад

This is one of the best LB7 injector replacement videos on the internet. Thank you!

@kevinfoster4116 3 года назад

Just want to say you gained a lifelong subscriber today. I just purchased my first LB7 and this is what I hear the first thing I'll have to do. Thank you for the advice and help

@junkrust2182 5 лет назад

Watched Rich for a year wrenching on diesels ..... now I own one .... blaming it all on Rich!

@scwten13 12 часов назад

Great video, thanks for posting. Especially the tip about the copper gasket and the coolant vent.

@cmcrc5881 5 лет назад

03 Silverado 350K miles and going strong. Only replaced 1 set of glow plugs and on my 2nd set of injectors. This time I put in a Air Dog lift pump and balance rates have stayed in check so far. Everything else is original. Love your videos. Keep up the good work.

@BiggusDickus2 5 лет назад

From this, I appreciate how easy injectors on are my 5.9 Cummins. What a pain in the ass this is.

@ram_diesel_power6039 5 лет назад

Good video as always. I’ve only done duramax injectors on a Matco 5500 tool truck with dual alternators and ac compressors. You gm guys are definitely dedicated.

@mike4796 4 года назад

Great video Rich- Your a great mechanic and even better Teacher- It’s one thing to have the knowledge, Another to be able to teach others. Keep em coming!

@left4dead794 4 года назад

He's the one in a million 👍

@rolandobelway8024 9 месяцев назад

Right

@gman1035 5 лет назад

Great injector work shown on the ol duracrap Rich, thank you.

@rcvloger 5 лет назад

I have an 04 Lb7 and I’ve been dreading the day I have to take it to a shop, but honestly after watching this, it seems much easier than I thought, Just time consuming is all, so I think I’ll be doin an injector swap myself, thanks rich! Love your vids 👍🏼

@Bradygoodz 5 лет назад

Sam A it’s not bad at all. Just take your time.

@ridingwiththereids 5 лет назад

Nothing is hard. Some things just take longer to repair than others.

@Bradygoodz 5 лет назад

Twoleggedkumulava 01-04 lb7. 04.5=lly.

@Bradygoodz 5 лет назад

Twoleggedkumulava glad you kept it together man, trucks are replaceable, and sounds like you are still enjoying working on diesels ! Lesser men would crack from the depression. That’s bad ass dude. 💯💯 you plan on finding another dmax and building it in the future ?

@bad406camaro 5 лет назад

As a disabled ex ford dealer mechanic when I did my first set on a 2003 Duramax I was able to do the injectors, Glow plugs, fuel pump, fuel lines and water pump started on a Saturday afternoon and finished up mid day Sunday with only hand tools in my driveway. It is a job but not a hard one. Watch a lot of RU-vid videos to see how every one dose it and you will have a few options on how to handle the Issues that comes up. My only real issue was pulling the glow plugs I think they were Original (I had just purchased the truck)

@kodykj2112 5 лет назад

How do you still only have under 200k subs?? It's such a good channel!

@FEASTJAPAN 5 лет назад

Never thought of that sequence when using silicone. The bit about cinching the bolts down, waiting an hour then torquing down. Thanks Rich!

@brad8665 5 лет назад

FEASTJAPAN if you ever read the instructions on the tube of silicone you would know this...

@Dirtfloorfab 5 лет назад

Rich there's a test port for the injection system up front by the alternator. If you prime with the hand pump and bleed all the air out thru that port it'll fire up first try no long crank. Just figured I'd say

@DEBOSSGARAGE 5 лет назад

Thanks budd. Learn something new everyday!

@Dirtfloorfab 5 лет назад

@@DEBOSSGARAGE no prob man helping others is what it's about

@BenSmith-rf9hb 5 лет назад

Works great when you’re stranded on the side of the road out of fuel but you have fuel in the back and you wanted to see how many km you get out of a tank of fuel

@DirtyDanRacimg 5 лет назад

Makes no real difference bleeding it their besides it getting diesel all over the belt and pulleys, after having a few noisy belt come backs i learned

@Dirtfloorfab 5 лет назад

@@DirtyDanRacimg holding a catch cup isn't that hard

@TRX450RVlogger 5 лет назад

So glad to see someone using RTV the CORRECT way! I hate when i see people just glob a bunch on and the tighten shit down it's intended purpose is to "Rubberize" then tighten stuff Down. Great work Deboss!

@randyhughes5160 5 лет назад

TRX VLOGGER do you know what RTV stands for????

@devoncoolman88 5 лет назад

The lb7 is a great engine. Very reliable and much simpler design then the later models. Iv’e never waited to torque down the upper rocker cover. Never had one leak yet. Also the rocker cover bolts and the injector return bolts like to strip out. Arp makes nice replacement rocker cover bolts and merchant automotive makes much better return line bolts. Merchant is an awesome source for parts and info for duramax’s.

@permagrin8742 4 года назад

I bought brand new Bosch injectors for my LB7. Been sandbagging putting them in. Helpful vid. Gonna kit the turbo same time. 250k miles and 4th injector been bad about 100k. Not making oil. Just smokes when idled in traffic for too long. Injector cleaner actually helped, from massive plume to zero after a 5 minute idle. But they still smoke occasionally when stuck in traffic. % are all good and close and low. Hope I didn’t buy new injectors for nothing.

@tt7hvn 5 лет назад

When I did my injectors last time, reading from the forums gave me a bunch of extra good advice. Like, putting a dab of RTV around the high pressure line that goes to the injector itself. A lot of gunk and get down there over time and I thought it was worth while. Also, given your location Rich, it probably would have been a good idea to change the lines with new ones. But, I'm assuming there was a budget to meet with this. Particularly on an LB7, more so I'd say than on other Duramax generations, fuel filtration is paramount, a lift pump is great for these trucks just for the filtration alone. Along with a CAT filter adapter, you'll have some long lasting injectors.

@stevewaclo167 4 года назад

While I agree adding sealant around the top of the injector connections will help prevent rust from forming and dropping into the injectors next go around, I’m beginning to wonder if it’s worthwhile since most times the only reason those fittings are coming off is to R&R injectors and anything that drops into the screen will need to be addressed when the cores go back for rebuilding. OK, I put silicon around mine too. 😀 Also agree on new HP lines. I notice Rich left the rail connections open during much of the job and as you noted, debris that’s not even visible can do a number on the injectors.

@jdpower5552 5 лет назад

I like these type of videos. thanks for making them.

@taylorbenner7704 4 года назад

WOW! Finally an informative, to the point, how to video with a few tips and tricks to make my life easier. I really appreciate your recommended place to buy them from too. I can’t afford the big name suppliers and really can’t afford to buy junk injectors and have to do this job again right away. So thank you for that. Almost all the videos I’ve seen on you tube seem like they guy making the video has no clue what he’s doing. But that doesn’t stop him from being very confident and over explain how to do it wrong with his cheap (brand new) tools that he doesn’t know how to use. Lol anyway, thank you for posting this video and sharing you experience. 👍

@taylorbenner7704 4 года назад

Also, I’m worried it could also be that my injector pump is the culprit. The issue I’m having is my truck is filling my crank case very quickly with diesel. It pours out my over flow tubes like crazy and covers under my truck and the poor person that is driving behind me’s windshield. It’s really bad, like fills my crank case with diesel in just a couple hundred miles. I’m changing my oil about 5 times a week. And it fills up a 5 gallon bucket every time. Do you know of anyway to check the injector pump to see if it has a bad seal or something? Im guessing it would be the seal on the input shaft? It lacks a little power when towing and is hard to start only when it’s hot. And of course it has very low oil pressure once it fills up with diesel. Any help on how to check that would be great. Thank you for your time.

@jonruger 5 лет назад

I remember you asking about these engine's and I said they are alot more simple then people make them out to be not near the head ache people claimed.

@nolabrannen102 5 лет назад

Love the engine builds

@ethanroberts6340 5 лет назад

I'm a mechanic and really only work on gas vehicles but now that I'm watching you do all this stuff on diesels and I'm wanting an lb7 and I'm wanting to know how to do all this work on the engine before I go spend the money then something goes wrong and dont know how to do it then have to pay someone else to do it. Your vids are amazing as well love watching them I'm learning alot about diesels watching you

@DEBOSSGARAGE 5 лет назад

Thanks. That's why we do it!

@norsebavarian1941 4 года назад

Nothing but respect for Northern mechanics.

@GregHuston 3 года назад

Crazy how this job (& the power difference) makes the value of the LB7 trucks close to half the price of LBZ trucks! I'm going to upgrade my Chevy 1500 to a Diesel and have been going back and forth between Manual Cummins, Duramax or 7.3 PSD. I actually upgraded a 4L65E (used $400) with a trans-go kit and swapped into my truck faster and cheaper than the injector job in the LBZ!

@blakeniemann2344 9 месяцев назад

Best video I’ve seen yet!

@OrangeSpeedTV 5 лет назад

295,000 on my 02 duramax now. On second set of injectors that were done before I got it but no major problems other than all of the metal rotting away from living in Massachusetts salt land. I’ve replaced, all body panels, all lines, front end and replaced all of the rear frame cross braces. She’s a beast now

@ridingwiththereids 5 лет назад

Wouldn't cost the same to buy a vehicle somewhere else that isn't all rotten and bring it home??

@OrangeSpeedTV 5 лет назад

Riding With The Reid's yes it would have been cheaper lol. I underestimated the amount of money that project was gonna take. Oh well, I have a truck that I’ve completely gone through now .

@gchris1642 5 лет назад

I also have an 02 with 280k mikes but haven’t done injectors since the recall. Crossing my fingers.

@ridingwiththereids 5 лет назад

@@gchris1642 just a matter of time.

@Assyrian_Orthodox 5 лет назад

I also have an 02 chevy duramax 400k still doing good bro I'm scared now after watching those videos lol

@AntonioClaudioMichael 5 лет назад

Great video Deboss

@ottolau6843 2 года назад

Great quick informative video.

@michaelbenoit248 3 года назад

This is why I love my 93 idi cuz there’s no stupid wiring, electronic injectors, IP controller none of that crap. Had a 95 & was constantly pulling off the valve covers cuz I was 17 at the time & Powerstroke injectors are expensive also while it’s got a blown head gasket, so while it was running I sold it & got a 93 idi that I drive now.

@Ratridez 3 года назад

Exactly , used to own an Ford idi it was bulletproof , I'm driving a 12 valve 5 speed no electronic crap for me . You can pump dirty water through those mechanical injectors .

@afhyoutube 5 лет назад

Rich mumbles torque specs in his sleep.. Zzzz ..60 in-lbs..zzz.. 89 in-lbs..zzzZ..

@malcolmyoung7866 5 лет назад

Thought it would be more like ''UGGA DUUUGGA. UGGAAAAA DUUUUUUGGA...'

@TRX450RVlogger 5 лет назад

Malcolm Young come on now you just killed the joke....

@timteevin4517 3 года назад

How do you know?

@longscaling2408 5 лет назад

Hey rich thanks for mentioning that company name you bought the injectors from. Im looking for injectors right now for my 05 common rail. Not gonna lie i think my heart skipped a beat when the dealer told me the price. This guy canadian diesel pro has awesome prices. Thanks again bud.

@DEBOSSGARAGE 5 лет назад

Tell him I sent you!

@longscaling2408 5 лет назад

Yeah i told him i seen your video. Thanks again man i found some cheap guys in the U.S. but after the conversion he still beats them.

@Ka_Gg 4 года назад

Hey sir, I recently found your videos and loving them. Good work. Been looking at upgrading to an older diesel and probably going to pick up an LB7 (really wish these older Chevy's had a 6 cylinder cummins, but oh well). Anyway, I see people talking about how their newer injectors would go bad after a short time, some people say 70k or 80k. Shouldn't they last longer though? I know bosch had a redesigned one, so maybe that fixes it all.

@mike4796 3 года назад

Rich your the “Charlie Daniels of the torque wrench!”⚙️🔩🔧⚒

@jtackerman28 5 лет назад

Love my 270xxx mile lb7, nothing but good to me.

@FirstGendodgegarage 2 года назад

Looking at other engine makes me love my Cummins so much

@riveraf5053 4 года назад

Awesome video!!

@fordf25042 5 лет назад

Could you make a video on replacing an injector pump for a chevy/gmc 6.5 Detroit diesel?

@wyndnra1n 5 лет назад

This new background music is NICE

@TheTechCguy 4 года назад

I remember seeing plenty of these brand new as a kid.

@judnichols8041 5 лет назад

Excellent, thanks a lot.

@kaseyschaffer7692 5 лет назад

Getting ready to do these myself on an 02.

@kaseyschaffer7692 5 лет назад

When’s the ideal time to do cups as well?

@devoncoolman88 5 лет назад

We do cups on a situational basis on lb7’s. If the cups are leaking coolant then do them. When you’re changing the injectors if one cup lifts up or comes out with the injector then do that cup.

@kaseyschaffer7692 5 лет назад

Thanks man

@ccrockett5358 5 лет назад

I've got a 2002 lb7 that was given to me by a friend who knew I needed a pickup to haul wood. Everything works on it except it needs injectors but I figure after I spend the money on S&S sac style injectors I should never have to worry about them again and will be way ahead.

@wildworldmotorcycleadventu7059 4 года назад

at how many miles u had to do them pls?

@mrjonas9657 5 лет назад

You guys have some nice diesel trucks over there :)

@CC-mf4kl 5 лет назад

IIRC, I believe the LB7’s were prone to leaking head gaskets as well...although this wasn’t as big of an issue as the injectors were.

@ermannodangelo1062 3 года назад

Great video, I dreaded the day mine would need injectors and now it’s here. Started smoking at idle, tried all the injector cleaners that you dump into tank. Had a quote over phone to replace with new injectors 6K, sound right?

@chachifeere 5 лет назад

What about the head gasket issues. Then the overheating with the lly. Then the emissions regen stuff with the lmm Where are you located do you do work for other people

@jeffsnider3588 5 лет назад

Have you looked at the Cummins Achates opposed piston engine? According to the information, long stroke to bore ratio equates to much improved efficiency. Two cranks minimize piston speed associated with the long stoke. I remember the Nebraska Tractor Test data seemed to always favor the old John Deere two cylinder diesels for horse power hours per gallon. This is a really old engine design, the British had an OPOC engine in a ship back in the early 1900's. You can see the British engine on RU-vid videos, it is in a Museum......but today again it is new and wonderful in a pickup.....

@olivierroyer4236 4 года назад

Great Vid! Your toughts so far on those reman injectors ? I know that canadian diesel pro sell relatively cheap reman ones

@dangermouse3314 2 года назад

The only issue with mine was the factory cp3 would not restart after hot. Had like 80k on it. New Bosh unit it’s been flawless. Great trucks last forever if you take care of it

@sonicx1249 5 лет назад

i done 4 of those engines now... the only thing that you did not mention is that you cleaned the tubes ( they get rusty and the rust falls down in to the injectors when removing them or putting new ones in) i go all in and do injectors and tubes cause when your in this deep in an LB7.. it not time to cheap out

@RussZHC 5 лет назад

On those bolts with the f'ed sockets, once you do get them out, do you replace with new? I mean you know the chances are you will be back to that engine at some point...don't know if its a bad habit or not, I've sort of got used to throwing them as far as possible to force the replacement...start to twitch just thinking of LS exhaust manifold bolts snapping off...

@ram_diesel_power6039 5 лет назад

Rich try the snap on digital torque wrench’s. They due angles inch metric. They vibrate and beep. Also they are swivel head. They make life so much better easier.

@steve6.7 5 лет назад

Ram_Diesel_Power only $799 please

@yohnny8839 5 лет назад

You lost me at “snap on”

@fahisaurus 5 лет назад

799 freedom bucks = 1100 Canadian pesos

@GuyRWood 5 лет назад

Eric O (South Main Auto) uses those, they look awesome.

@ram_diesel_power6039 5 лет назад

I’ve had mine ten years and when I checked calibration it was still perfect. You get what you pay for

@jakek7112 5 лет назад

Rich, well before this video I bought an 03 LB7 with 200k on the clock and very bad injectors. I replaced them myself learning as I go, following old timer advice and torque specs carefully. I set the valves while I was there and it fired up ran great, but it had a light haze out the tailpipe. It had fresh oil and a new fuel filter. I had my new injectors tested and they were good. The oil pressure sits at 14 psi when warm, close to red. Sry for the long comment, I was hoping to get your opinion on what you think might be wrong Thanks

@DEBOSSGARAGE 5 лет назад

How much did you spend on injectors? Check your balance rates with a scanner

@wildworldmotorcycleadventu7059 4 года назад

@@DEBOSSGARAGE Around how many miles the injector usually fail pls?thanx!

@gotjuice7160 5 лет назад

Mechnical or VP44 lines are equal length because the injector fires once fuel pressure overcomes the spring pressure on the pintle. If the lines are not the same length, you change fill time, and timing on the engines. That is the one main difference between Mechanical and HPCR injection systems. Full authority timing control.

@moetic6601 5 лет назад

Hey that intake heater controller module near the fire wall on the gmc I'm trying to figure out where the ground white goes too i hooked all three wires right but I out have a black wire left which is the 4th black wire I forgot where it bolts too it's an 2003 gmc 6.6 diesel I did the injectors

@shaunhuckabee5904 5 лет назад

Man it's crazy how truck prices have skyrocketed! All these fan bois building trucks all show, no go ruin it for the average blue collar guy who wants to buy a decent used truck!

@Darklordkime 5 лет назад

I have no interest in buying mainstream diesel trucks. But guy do I feel you. Even nicer IdI fords people are asking outrageous prices.

@JamesLee-oe7mt 5 лет назад

I live in Texas couldn't agree more. Basic 15 year old Silverado gas v8 with 200k set me back as much as a 2008 Lexus with half the miles. And the Lexus cost like 50g new. Sucks if you're on a budget but actually need a truck to work...

@shaunhuckabee5904 5 лет назад

@@JamesLee-oe7mt It's ridiculous man! I really want a good used truck for future endeavors but as the sole provider for a family of 5, a truck note isn't a option! I'm mechanically inclined but these guys want $27,000 for a 2007 Ram 3500 with head gasket issues! Not this guy!

@jayxtreme6 5 лет назад

@@shaunhuckabee5904 If you absolutely need a pickup this won't work, but if you're good with an SUV then I say get a diesel ML 320 CDI. Mercedes actually builds extremely reliable diesels, and the OM642 engine is a tank. Its worse issue is the copper fuel injector o-rings failing after some time, but if you're mechanically inclined all 6 o-rings can be replaced with all related bits and bobs for 50$. It's a small engine but it pulls like a locomotive.

@svtirefire 5 лет назад

Is the insane prices of new trucks that's ruining the used truck market.

@RobertKohut 5 лет назад

Nice!!

@coles201 5 лет назад

Is it worth filling the heads of the allen bolts with copper slip or something to stop them rusting?

@somebutter6755 4 года назад

I’m contemplating wether I should do it on my 345k mile gmc dually. It’s either replace the injectors or sell it and buy another truck.

@BenSmith-rf9hb 5 лет назад

Have a 2002 2500 HD LB7 with a six speed standard but needs a water pump needs a frame

@Gwinn9 3 года назад

If the injector cups aren’t disturbed, do you just leave them be, or would you recommend pulling, cleaning and new o rings and loctite?

@AustrianAnarchy 5 лет назад

Awesome! OT: Is it a waste of effort to bore/stroke a Cummins 12v? Can it be done without sacrificing longevity?

@iainscott616 3 года назад

When you do injectors on an LB7, do you replace the high pressure lines?

@WBOS72 5 лет назад

Thanks for the vid Rich. What do you use to check the injector balance rates . Nice truck, but Id go Dodge Ram first - Cummins is easier to work on.

@jonathanbarstow5989 4 года назад

Hey, Rich, love the videos man. Do you have any that address the terrible IFS steering and suspension that has plagued these trucks pretty much since it was introduced in 1988?

@axispowerdiesel 3 года назад

I knew rich would answer my question about the return line sealing washers...last guy put them on wrong and three were broken

@jvmopar 5 лет назад

CLEAN THE INJECTOR LINES! Inside and out. GM suggested inserting a pipe cleaner into the line and sand blasting. But just make sure you scrape all of the corrosion out of the fittings and blow them out with air thoroughly.

@ginabetoney127 Год назад

Thanks for the video! Where did you say you bought the injectors?

@Mebob2001 3 года назад

i had tried Canadian diesel pro, his lb7 injectors are not bad, bosch are alot better, but they worked, i also got a reman lbz injector from him and 4 months later the electrical solenoid went bad and when i called him he used every excuse to not warranty the injector, i neveer said my truck was tuned but he tried saying that, said GM doesnt warranty the solenoid when they do, i worked there for 10 years, if anything goes bad with the injector they replace it free.

@khoroshilovalex2012 5 лет назад

PLEASE HELP! Any advice on how to get stuck torsion bars out on my 1 ton sierra? Truck originally came from Canada so I figure you'd deal with the same sort of stuck. Have tried heat, sledge hammer, different penetrating fluids and air hammer. All to no avail. Any ideas appreciated! Thanks.

@freewillfarms2059 4 года назад

Can you replace the head studs without taking off the heads ? My head gaskets are not blown but I want ARP studs on mine while a mechanic is replacing my injecters.

@jaytee8171 5 лет назад

Just picked up a O2 LB7 with 250 K on it. Was running great, started smoking at idle and cruising speed badly, Knocks at idle a bit too. Idle won’t stay consistent and all balance rates are at zero. Command rates for one, two, three and sevenarezero arrest jump around, injectors the only thing it could be? Thanks in advance

@bwspyder1 5 лет назад

Fantastic tutorial but pulling each injector cup and resealing the tip and new o rings is definitely cheap insurance. When wiggling the injector back and forth to get out, it can break the Loctite and you may never know that it broke loose unless it lifted. Also new hard lines are a must.

@jamesbeatty7500 4 года назад

Question Rich?? Injectors are 6 months old and oil and fuel mixing again. Not skipping but I'm questioning the sleeves underneath. Any thoughts would be appreciated.

@lazowelding 5 лет назад

What numbers should I see on a scanner to know what injector is good and what one is bad on the balance rates???

@kerriearslan-jw3ch 2 месяца назад

Can the head bolts be retention ,as a very slight oil weeping from it .on my 2002 LB7 duramax

@rplonske9563 3 года назад

Could a bad injector lead to low compression in a cylinder? Along with extra fuel in the crank case …it has a whole bunch of blow by all of a sudden. Thanks

@MrBlueJK4 5 лет назад

Rich I was wondering what's your opinion on lift kits? (Disregard if you've addressed this somewhere else)

@MJPR001 4 года назад

Is this something I can do as a novice at home? Also what is a typical mechanic bil for this?

@PeterJr1985 4 года назад

Hey Rich, how long does this take to do. Thanks

@rickszabo4312 5 лет назад

Great vid, wonder if not adjusting the valves was not in the customers budget.

@DEBOSSGARAGE 5 лет назад

It was done in a separate video

@stevealbers685 5 лет назад

Any LMM injector replacement's in the future?

@TermiteBenny 5 лет назад

Only thing I saw that I would have done different was those high pressure fuel lines to each injector should have been replaced. It looked like you reused the old lines. I learned the hard way and reused the old lines the first two injector replacements within 60,000 miles. On the third set I replaced all 8 lines for about $600.

@Bradygoodz 5 лет назад

B&K Excavating LLC reusing the old lines is fine, must throughly clean them first.

@TermiteBenny 5 лет назад

I was told from a few different mechanics and injector shops including industrial injection where I purchased my last two sets of injectors from that no matter how well you clean them, small fragments of metal can continue to pass through the high pressure system and cause damage. For $600 I’d rather be extra safe and install all 8 new lines with 8 new injectors. I still didn’t have luck even on the third set after 30,000 miles number 7 started having issues so I sold the truck. First set was replaced at 98,000 miles, second set at 140,000 miles and third set at 190,000 miles. At 220,000 miles number 7 was bad balance rate and truck was hazing bad so I was done spending money on injector issues and sold it

@Bradygoodz 5 лет назад

B&K Excavating LLC Mechanics are trained to sell you parts and labor. It’s how we pay bills. Most don’t own a sonic cleaner, or are too lazy too clean them.. lb7 lines are high quality and totally reusable. But if you have the money to burn it’s always nice to have new.

@Bradygoodz 5 лет назад

B&K Excavating LLC and that sucks you had issues like that with your truck. After owning and daily driving two duramax trucks for the last 13+ years (01’ lb7 , 06’ lbz) I can honestly say that it’s all about filtration and fuel additives with these trucks, if you don’t want a haze. If you want the injectors to last you must run a lubricity addictive and keep the filter changed regular with a tp3012 and watch where you fill up, many many lb7 forums topics have been started with “hazing after fill up” at a shit fuel station. I’ve fixed many hazing issues with a heavy heavy dose of power service mixed with tcw3 and a filter change afterwards.. if one can keep them clean they will last. My lb7 is on its second set with 270k miles and does not haze at idle.

@Bradygoodz 5 лет назад

Fau Q Power service and tcw3 two stroke outboard oil mixed together, Use 1/4 quart of tcw3 every fill up. Super tech sells it by the gallon at Walmart for $13. Mix it well with 1/2 quart or more of Power service. That part is key. Dump it in before you fill up with shitty #2 diesel lol.., lb7’s love it.

@Tpuff58 5 лет назад

Should i go 2nd gen p-pump or 3rd gen common rail? And why?

@panos75 4 года назад

hi,i found a nice clean ´`2 2500 4x4 truck with 380k km,injectrors were done at 340k and all normal maintaince,how much is too much kilometers on those engines ? does it have some life left you think? thank you for any answers!

@abepeters48 4 года назад

Rich, are all of Canadian Diesel pro's LB7 injector options good?

@newfie231984 2 года назад

Have a question have a 2002 gmc 3500 diesel van 340,000km runs and knocks at idle and sputters and hesitates when put in drive. Put back in park it idles really low and knocks hit gas idles back up but rough idle up van runs and sounds great only at idle and noticed she looses power while driving and hesitates. No engine codes at all when scanned. But white black smoke while under load. I’m stumped weather I need a injector job or FPR replacement.

@PullStartStables 2 года назад

Say you have a southern truck, or western for you maybe? Something rust free. Would you then pull the cab for best access… or is this really a couple hour job for you? I find that rear bolt on the driver’s side valve cover is a real bear. I’ve done pushrods with the cab on, so I suppose I can do injectors too? Would it be of any benefit to lift the cab just a couple inches?

@jamesmclennan3618 3 года назад

Do you gain my power if you upgrade your injectors to a higher flow set.

@Drewman60 5 лет назад

Hello Deboss Garage how much time should i allow myself to do injectors on my "03 LB7 ? as i need to do them soon I am mechanically inclined but never have done these injectors before thanks , great video .

@DEBOSSGARAGE 5 лет назад

12 hrs or so.

@dtoshredneck 5 лет назад

2001 have an issue with p0093 for some odd reason, usually hits 3rd gear, feel it buck a bit then check engine light comes on and limp mode. Changed low pressure fuel lines, fuel filter every oil change and new seals in the primer, still does it occasionally, just have to stop cycle the key and it goes away. Could probably fix it with a lift pump, and this truck is stock as the day it came from the stealership

@kimuhsleinad 2 года назад

same here its a 2001 with the same problem, read lots about it online. i was gunna try a new cp3 pump next.

@dtoshredneck 2 года назад

@@kimuhsleinad turns out I had a bad injector, found out through flowtesting the return and it being over spec, I did add a Fass lift pump and it did help but it still was going into limp mode, cheapest place I found injectors was through the Dmaxstore, but don't get injectors just cause, proper diagnosis is key here, it may be as simple as the safety plug having an issue

@MiguelTorres-gu5bi 5 лет назад

I have a 02 Duramex and change the injection pump and the ficm and won’t start any idea what it could be? Help please

@samuelsimard7270 Год назад

Do you have to program the ECM for the injectors?

@wildworldmotorcycleadventu7059 4 года назад

@DEBOSS GARAGE .nice vids mate! was thinking to get a 2003 silverado duramax 6.6L .around how many miles/kms are the injectors usually failing?seems like a must do on this engine(?)thanks!

@williesawyer5894 3 года назад

Every 100000

@romarazumovsky9002 5 лет назад

You can buy a special tool specifically for pulling the injectors out for like $80 on ebay. Makes it alot easier

@stevewaclo167 4 года назад

Special tool may be best, but just screw on the original HP line and twist back and forth and pull till the old injector comes out. Alternatively, there is a technique using a pry bar (search RU-vid) that is also effective.

@PotatocannonLol 5 лет назад

I would use a claw push it through the washer open then pull out

@carlosvaldez70 11 месяцев назад

I do have a lb7 with return line leak would you work on it?

@BrowerBandit 5 лет назад

I replace the injectors on my lb7 and lets just say it took longer than i thoguht due to the fact it started to rain and i dont have a garage...

@nerfmaster0326 4 месяца назад

Hey man I need help I have an 03 chev c4500 with an Isuzu 6.6 engine and I need help with the injectors I have the new ones in hand but I need help with pulling the top of the enonge apart and it’s half way under my trucks cab so what do I do?