LCARA HAM Radio: Rohn 48' Tower Installation Part 3 - Tower Assembly!!!!

Подписаться 7 тыс.

Просмотров 20 тыс.

50% 1

Welcome to the Lake Cumberland Amateur Radio Association Club's RU-vid Channel.
KI4RWO comes down to the property to stack the remaining sections of the Rohn tower.
LCARA is an Amazon affiliate and using the below link(s) to make a purchase does earn LCARA a small commission to help with club expenses. Check our our ham radio related gear at our website: www.lcara.net/hamradiogear-ama...
Be sure to Subscribe, Hit the Notification Bell, Like and Comment on the video. We need everyone's support as we grow our wonderful club!
Support LCARA with your Amazon purchases. We are a 501(c)3 organization and can use your support. Go to smile.amazon.com, and register Lake Cumberland Amateur Radio Association with your Amazon account. It doesn't cost you more and sends a few nickels to the club with each purchase.
To join Lake Cumberland Amateur Radio Association you can email dmunsey@windstream.net. You do not have to be local to our area and with Echolink, you can join in the fun on the Nets!
President - Don Munsey, AC4DM
2M Nets:
Sunday @8:30pm Eastern in the USA
Tuesday @8:30pm Eastern in the USA
10M Net:
Thurdday@8:30pm Eastern in the USA
Echolink - AC4DM-R
Kentucky DStar Net:
Thursday @5:00pm Eastern in the USA
Reflector 056B
Repeaters:
2M - 146.880 PL Tone 77Hz
70CM - 443.600 PL Tone 100Hz
DStar - 444.8375 Digital Voice (DV)
GMRS - 462.700 PL 118.8 (Please ask for permission to use when you are in the Lake Cumberland area)
Please visit our other social media outlets:
CHECK OUT OUR WEBSITE:
www.lcara.net
FACEBOOK:
/ lakecumberlandara
INSTAGRAM:
/ lcaraclub
#LCARA #hamradio

Наука

Опубликовано:

29 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@jayjay6804 Год назад

Although you keep stressing safety, he does not use his fall protection device! They are the two straps with hooks dangling behind him. The linemans rope does nothing to prevent a fall. The fall protection is what is needed to be always connected to the tower.

@justDIY Год назад

I also thought proper procedure was to climb without be saddled with tools and supplies, instead letting the ground crew hoist those up once the climber is in position?

@larsmark Год назад

Yeah, you should always be 100% attached to the tower.

@bentheguru4986 4 месяца назад

Yeah, totally unsafe.

@Walrus570 3 месяца назад

@@justDIY the ground crew sucked... guy at the top was pulling the load like wtf

@andrewfiertek5937 Год назад

3 points of contact is good but useless if not connected to tower in case of a missed step, lineman’s belt will slide to the bottom with the climber.

@n4gix 9 месяцев назад

Back in the day (4 decades ago!), I used to make one turn around the leg opposite of me to ensure that the belt would not allow me to fall more than about six inches. That was long before OSHA was making up new rules.

@zach3664 Год назад

Definitely needs two large climb rated carbiner style clips, to actually clip to the tower structure, just in case of a fall.

@panicpoint2000 Год назад

Nice work, but he’s not using his leg straps or the fall protection hooks… Not safe at all!

@jamess1787 Год назад

He doesn't even have gloves. What a Chad.

@glenmartin2437 10 месяцев назад

I appreciate your video. Every tower climber has their own style. The main thing is to survive the project. Thanks again. N0QFT

@czmg22 Год назад

Thanks for taking the time to record this event. It's always interesting to see how the sausage is made. Looking forward to seeing the next one.

@LCARAHAMRadio Год назад

Our pleasure!

@mikemcdonald5147 Год назад

Great stuff thanks for sharing. I always love your videos and explanations.

@josegermanparra6064 8 месяцев назад

Many thanks for this very informative video !

@DICAPRIO762 3 месяца назад

Very good my friends, Congratulation and 73 By PY5SX 🤝🏻👏🏻👏🏻👏🏻X👏🏻👏🏻👏🏻

@Promark2012 Год назад

Good job as always with KI4RWO!! Nice job in filming and editing so everybody can see what it takes to construct towers of this natural!!

@LCARAHAMRadio Год назад

Glad you enjoyed it!

@Dennis-sb7gp Год назад

Thanks!

@makennaberry6138 Год назад

Very great video! Always nice to see people doing what they are the best at. LCARA is very lucky to have a great professional tower climber. And Brian, I think instead of Hawaiian shirts, next time he should come wearing a suit. And to all the ones who are getting all wound up about his safety equipment, or as you people say lack of, he’s been at this since he was 5 years old

@AliReza-zx8km Год назад

Nice.......

@mikemurphy1940 Год назад

He has a fall protection on his harness but isn’t using it. Yikes!

@charlierumsfeld6626 Год назад

No helmet? He has one

@10rninjariderzx Год назад

He did not connect his fall protection lanyards. The work belt is not fall protection

@clearsailing7993 Год назад

I thought they would put guy lines at about 20 ft to stabilize the tower as he went higher.

@dalev1319 Год назад

Only one yard of concrete? Free standing tower.

@dougtaylor7724 Год назад

Was wondering same thing. I’ve been in their part of country. The wind can blow 35-45 mph for 10 minutes at a time.

@greenbean78 10 месяцев назад

and where is the Guy Line Wires at as well ?

@jhonsiders6077 4 месяца назад

That HDBX 48 free standing calls for 8 yards to give it a 90 MPH rating with a inch of ice on it . I have one . And just 4 years ago I put up the HDBX 85 foot it went to 10 yards . For the same loading .

@user-pf8lf4zx7i 3 месяца назад

❤

@nivid01 11 месяцев назад

Yep , I don’t think Ken will be with us much longer! I was nervous because I know how little concrete there is in the ground. When it pisses down rain for several days and the ground becomes super soft, over she may tumble!

@jhonsiders6077 4 месяца назад

Yes Rhône says 8 yards for the HDBX 48 I have one and then put up the 85 foot one. It takes 10 yards .

@dizydiz Год назад

I’ve got one (gently used) on the ground. I’m about ready to put it up. Q: How solid did it feel when you had all rings up? Why not put antenna on at same time you set up tower? Will you be making a video on grounding the tower and shack? What else do you plan on putting on this tower?

@jameyevans29 Год назад

I dont know why but I love towers. Lol. I want one with a yagi 20 meters

@Subgunman Год назад

I know all tower workers have their own safety methods but the people who have done tower work for us in the past will lower their tool / supply bag to the ground so it's not in their way when descending. They also have a riggers pulley that they will attach to the top section to lower the gin pole to the ground while they remain at the top. When the pole is down they remove the pulley and take their time returning to the ground. Kinda glad I don’t get involved with this any more, too old for climbing and bad knees.

@hangfire5005 Год назад

what does it cost to have a 50 foot tower put up?

@KE8ODY-WV-Ares-Ham-Dad-3O4 21 день назад

Guide wires

@Doonit_hard_way_since_65 8 месяцев назад

Easier to just Build on ground and tilt it up.

@jhonsiders6077 4 месяца назад

Guys Rhône specs for the HDBX 48. 8 yards concrete ! Did you all guy that tower ? Plus those home made stubs only have 2 bolts on each leg factory 3 I do hope there is nothing valuable around the foot print of that tower . I had one then got a HDBX 85 it went to 10 yards of Crete . They if you contact them will send you specs for the base and the stubs are just $100 I did that and put a lot of steel in mine all welded to the stubs it rated at 90MPH constant wind with a inch of ice build up . I just have one fm transmitter antenna and 3 microwave 16 inch drums on it for the internet. Nothing close to the 5 square foot load to that spec . That and I hope he did not ground it from the bottom of the home made stubs that will cause if hit a good lighting strike will blow the concrete to smithereens !

@jackryan9587 Месяц назад

Is the guy insured and bonded? if so then i could care less how safe he is or isn’t. That’s his business. He obviously does a good job and I’d pay him to keep my happy butt on terra firma. good video man.

@Myis300t Год назад

36" depth? No rebar? Not even close. You have 100% exposure all around. What are you putting on top a 2m whip? Would not be caught dead climbing that. My 48' tower has engineered 8' deep 4' diameter hole, rebar cage and just over 4 yards of concrete. Rated for 20 sq. ft wind load @100mph and a K factor rating of around 2200Ft. lbs. This is scary...

@user-uu4yo7pc5n Год назад

Nice showing a tower raised however, he has multiple safety violations. 1. No hard hat, 2. No use of safety lanyards, 3. Ground persons with no hard hats. If OSHA had seen this it would have been a $42,000 fine. Nothing safe about how this was done.

@andrewfiertek5937 Год назад

Would have been smarter if he wore a helmet and he was 100% secure to the tower at all times which he’s not. Video is missing a lot of safety equipment especially the most important is helmet, leather gloves or gloves and a Y or V line lanyard. Lineman’s belt is only good if you go through a rung but to move several feet up or down and being attached 100% is to have the Y or V lanyard. If he slips or has a medical condition he comes down the tower smashing his face on every rung. Ground person should wear a helmet in case something falls, safety glasses and gloves. Knowing your location and a safety plan where to meet emergency personnel in case of an emergency. The gin pole is nice. But safety should NOT be taken lightly and know one needs to copy your build because of all the missing items.

@ka1ze749 Год назад

The comments are spot on. 100% contact with the tower is a must! In case of a fall you need to be wearing a helmet to prevent head injury. Also , the climbing belt should be secured to each thigh to insure the tower worker will not be able to slide out.