Leaking Carb Fix | How To Clean Your Carburetor On Pit Bike

Подписаться 21 тыс.

Просмотров 64 тыс.

50% 1

My carburetor started to leak fuel constantly while on so decided to show you guys how to fix that. Usually the result of a carb needing cleaned up because something is sticking.
also a video of washing the bike up with some tips and tricks.
Enjoy!
Bike: Pitster pro x2 125cc with Piranha yx 140cc Engine

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@blacktrex1634 7 дней назад

Hello there, i have similar 150cc died on me and it started to leak fuel out of the downpipe that is connected on one side and not on the other other i pressure i believe do i need to clean it is it clocked?

@connorjack3246 2 года назад

How many gaskets you got on the carb for the manifold?? Great video

@slavsquad 2 года назад

Thank you! If your carb has an O-Ring then you just need 1 between the spacer and the upper intake. Then you need a gasket between the bottom intake and cylinder head. Hope they helps!

@connorjack3246 2 года назад

@@slavsquad so the black plastic bit with an o ring in by the carb does that have a gasket on that end too??

@slavsquad 2 года назад

@@connorjack3246 so if the black plastic (spacer) has an oring then you just need a gasket on the other side where there is no oring. Bascule you need a gasket where there is no oring. On both the top and bottom of the intake

@connorjack3246 2 года назад

@@slavsquad yeah ok bro thanks for the reply 👍🏻 and what do you recommend on the valve clearances on a 120cc 4stroke

@slavsquad 2 года назад

@@connorjack3246 my pleasure. I’d say .003 intake and .004 exhaust

@Chemo_Sucks Год назад

Awesome o found the video I need!! I'm taking mine apart now!!

@JasonKimmerer Месяц назад

Mine keeps falling off

@VictorLopez-hg3di 2 года назад

What was your issue ??

@_norty_svk9035 4 месяца назад

how to remove the needle in the carburetor?

@slavsquad 4 месяца назад

Twist it off the top if your carburetor is like mine. Once you get it out if you want to remove it further, you have to compress the spring with your fingers and then pull the wire through the bottom. Once you compress the spray you should be able to see how to get it off the cable.

@LifeExplosion 3 года назад

My pit pro 140 does exactly the same thing. Leaks from the intake when standing still

@slavsquad 3 года назад

Tighten the screw at the very bottom of carb. If it doesn’t fix it take it apart and do a full clean

@LifeExplosion 3 года назад

@@slavsquad thx bro. Ill definitely give it a try. For now if I always turn off the fuel tap when I kill the ignition it seems ok. I guess it must be sucking enough fuel when Im riding to not notice.

@slavsquad 3 года назад

@@LifeExplosion if it doesn't bother you then no problem!

@LifeExplosion 3 года назад

@@slavsquad thats what Im thinking too! Stay gold bro

@slavsquad 3 года назад

@@LifeExplosion thank you 🙏 you as well!

@nathanielschwartz6751 2 года назад

Where do you think I could buy another float needle?

@slavsquad 2 года назад

Probably eBay would be most options or Amazon

@nikolaj550 7 месяцев назад

i tried this on my 125 cc china dirt bike but my carburator is still leaking and i did tigh in the flow screw but still leaks???

@Pnb_daniel 7 месяцев назад

Should I run Nibbi PE22 carb on a 140cc

@gala83filmstaylorg7 2 года назад

Got my 155 h.o going but my carb is flowing gas into the motor, thinking the needle and seat at done

@casperjakobsson5955 4 месяца назад

Thanks so much now it dont leak all the time

@Jamesbond-gd8ce 2 года назад

Is there a way to clean it out without taking it apart

@slavsquad 2 года назад

Some people got lucky with compressed air down where the fuel line connects but it doesn’t always work. You can still have dirt trapped inside. And eventually might make its way back into the Jets. It’s really easy to take apart and clean. That would be your best bet

@slavsquad 2 года назад

Also if your carb has that bolt type thing at the very bottom. Should be like a 17 mm or something big. You can unscrew that and you’ll have access to the two jets. This is how you normally do it on a big dirtbike or four wheeler if you don’t want to pull the carb

@Jamesbond-gd8ce 2 года назад

@@slavsquad appreciate and I’ll give it a shot and take it all out and clean it good

@amylouise1290 Год назад

Best link for a carb on a 140cc

@slipperygoose2098 Год назад

Carburetor is a frinch word for do not F*** with

@slavsquad Год назад

Lol shoot

@zemiak6638 Год назад

thank u bro

@kacigeorge3929 Год назад

will your jets still work if they’re a little bit bent

@slavsquad Год назад

In my experience carbs are very picky on these and it would probably give you issues.

@mitch5114 2 года назад

Do both those tubes going downward connect to nothing?

@slavsquad 2 года назад

Yes they just hang there for extra fuel to come out or when you flood it

@VictorLopez-hg3di 2 года назад

My spills gas too should I do this ???

@Danny._.69. 8 месяцев назад

Yes!!

@pablo-eskibah3441 Год назад

Hey man does your carburettor touch the head of the motor ? cause i just put a new motor in and the carburettor that came with it touches on the motor

@slavsquad Год назад

Mine never touched but were close. Make sure your using both spacers on lower and upper intake

@pablo-eskibah3441 Год назад

@@slavsquad yeah i have the paper gasket on the button of the intake then the rubber spacer between carburettor and intake

@slavsquad Год назад

@@pablo-eskibah3441 might need another spacer on the bottom

@NotJooob 3 года назад

I didn’t do it

@slavsquad 3 года назад

Haha

@robertomelgarnicolas8446 2 года назад

How many turns does the air screw have?I have the same motor and carburator but my pit bike works badly

@slavsquad 2 года назад

Usually screw it in 1 1/2 turns out. And idle 2 turns out. Start the bike. Turn the air to fuel in or out to get the highest/smoothest rpm’s. Once the engine is running its best you can then turn the idle screw out to lower the rpm’s.

@robertomelgarnicolas8446 2 года назад

@@slavsquad OK thanks

@mikalblock4389 9 месяцев назад

@@slavsquad do you have stock jets in yours the 107.5 and 15 ?

@slavsquad 9 месяцев назад

@@mikalblock4389 I just run the factory jets. Not sure the size off the top of my head

@AF.256 2 года назад

what forks are those may i ask? looks like a 140cc i got the same carb and do you know what size jets are those? tysm appreciate it!

@slavsquad 2 года назад

It’s just factory Pitster pro forks and the carb is the factory mikuni carb that comes with the 140cc engine when you buy it. Same with jets. All factory I don’t know the size of the jets unfortunately

@AF.256 2 года назад

@@slavsquad it’s all good no worries ok i’m bouta order some inverted forks for my 140 build. appreciate your help!!

@slavsquad 2 года назад

@@AF.256 my pleasure! Inverted forks = 👌🏻👌🏻

@georgemixalakis3724 2 года назад

Uh bro i got a Chinese carb from a pit bike just like yours and he cleaned it before i got it and he Said it's leaking fuel it's been a month since i got it so i said i clean the little jets and main jet was clean the little one that yours was clogged mine was so clogged up that you couldn't unclogged it with just air so rn I don't know if that fixed the problem

@slavsquad 2 года назад

It might fix it. Could also be a float problem. Jet clean fixed mine

@georgemixalakis3724 2 года назад

@@slavsquad i tested the float if that doesn't work then i need to buy a gasket it doesn't have a oring it has a gasket 😒 which makes my life harder to find parts for it

@slavsquad 2 года назад

@@georgemixalakis3724 yeah that’s weird. Should be a oring

@georgemixalakis3724 2 года назад

@@slavsquad brother It was the jet and they way of closing the damn thing I'm gonna add my 22 carb next week probably but my engine is burning oil should I put the 22 or nah?

@slavsquad 2 года назад

@@georgemixalakis3724 gonna burn oil regardless so why not

@Rippinandfishin Год назад

could this fix the fact that my pitbike smokes

@jaredreck882 Год назад

@ssxdemonxx9081 Год назад

You need piston rings or head gasket

@dirtbikekid7003 2 года назад

Next time work smarter not harder!! U took the time to cover the shit with a bag when u could have put it on then washed the bike. But the video was helpful.

@slavsquad 2 года назад

True. Oh well ool