for anyone here for the DIY buttons: white is the maximum of each color so all you have to do is hold the arrows down. then adjust your color! edit: btw i changed my name and pfp
Ariana Eilish do you know how to make it a solid color because mine are only flashing red green and blue and whichever button I choose it still doesnt change anything it always stays RGB
Maryam Elhosseni he shows it in the video; you just press the button of color you want. it’s the middle section of the buttons with all of the colors. :)
i think that means you have RGB led lights. that means it creates the colors with only red, green, and blue. for example, for white, mine uses red, green, and blue to make white. when i got mine it drove me crazy but you get used to it over time
How do u stop it from flashing? I can change it to fade, and I can have it quicker or slower. But when I press a solid colour, it just flashes like crazy.
Hey mate How do program one remote to control both strips (whips) i have two separate led strips, which each have their own ir controller, but dont know how to program and control both using one remote, rather then having two.
@@vikaflop If you push on a DIY button and it is bright white then the Red and Green and Blue are all maxed out as bright as they can go. Press the down arrow on your remote and hold it and you will see the color begin to change. Do this for red/green/blue to adjust to whatever color you want. Each color has 64 levels of brightness.
All of colors under red arent working for me, i just have white green and blue and i dont know how to fix it help me please Edit: when i click the red button it all goes black
if you still need help with this.. keep the power on from the plug, and turn off the lights from the remote. click fade7. the lights should flash white for a second. turn it back on, and try again. the colours should be different this time. turn off and repeat until the colour red lines up with red etc! hope this helped
For whatever reason the colors on the whips are messed up when I press the red different colors come up for the two when I press green they both come up as red im so confused is there a reset i can do?
thats how RGB lights work! they mix the colours of red green and blue to make new colours. try it in a dark room, and the lights should emit the shade you want
@@amulya2539 thats how RGB lights work! they mix the colours of red green and blue to make new colours. try it in a dark room, and the lights should emit the shade you want
I was playing around with the remote and when I was done I went to click the red (red button with R on it) and the led lights turned green? I went to click green (green button with G on it) and the lights turned red. All of my other colors below are mixed up. How do I fix this?
Press the original red colour, then turn the off button, press fade 7 and there should be a flash, them turn them back on and it should work, if it doesn't do it a few more times
My colors are in rainbow and I have my colors in different sections so there’s only blue red and green but they’re in different sections not one together help
I’m afraid it’s the strip itself and not fixable, when you put it behind something it’ll show the color but otherwise it’s the ugly red-green-blue. Spent $20 on that shit
Press the original red colour, then turn the off button, press fade 7 and there should be a flash, them turn them back on and it should work, if it doesn't do it a few more times
thats how RGB lights work! they mix the colours of red green and blue to make new colours. try it in a dark room, and the lights should emit the shade you want
I got you if I'm not to late First you check the connection between the the strip and the weird plug thing one of those on yours might be backwards, so on both ends of the connectors there should be arrows and you just match those up if you need more help just dm me on ig @daingalleisky_
My led lights don't work at all, except when i push fade7 button, then they only blink once. I can't fix this problem or find sollution. Someone please help.
7195roko you’re going to laugh once i tell you this but it’s because you don’t have it on😂 you have to click the red button at the top. i had the same problem but found out it was because it was not on
i think youre talking about the stop button! basically, when your lights are on fade, pressing that button will pause the fade. you can press it again to continue the fade. its good if you find a nice shade you wanna have! :)
clemmutine The arrows are used for the diy button. So say you want to save just a plain red color for the first DIY1 button right. After you press the DIY itll be just a flat white, thats because the red green and blue are all at the max. So basically hold down the blue and green down arrows until those colors are gone and you can see red. Then press that DIY 1 button again to save it as red. I hope that helps alittle I’m still trying to figure some stuff out since I just got one.
so if you press DIY you can make your own colors, first you have to put all the arrows down so there's no color so that there's no light then press the up arrows to put that much amount of that color, so if you would want to make purple, you would press diy, and then press the green blue and red arrows all the way down so that there's no light then you would go 30 red and 30 blue or put as much to your liking (hope this helped)
thats how RGB lights work! they mix the colours of red green and blue to make new colours. try it in a dark room, and the lights should emit the shade you want
thats how RGB lights work! they mix the colours of red green and blue to make new colours. try it in a dark room, and the lights should emit the shade you want
