Тёмный

LED Interior: Lexus IS300 Dash Gauge Cluster | USB Outlet Install | Blue LED Security Light 

Binh-Tuner with Kids
Подписаться 24 тыс.
Просмотров 18 тыс.
50% 1

Upgraded my gauge cluster, key ring, climate control, switches, and ashtray/glove box lights to white replacement LED. Also replaced the red Security Light on cluster to blue LED. Added a dual USB charger with voltage display to replace broken cigarette lighter outlet.
194 LED for Cluster - amzn.to/3s1hv4o
74 LED for interior - amzn.to/3dNnWEi
NEO-3 (T3) for Switches/Climate - amzn.to/3dJB8dx
NEO-4 (T4.2) for Switches/Climate - amzn.to/2NCUupV
Dual USB charger with voltage - amzn.to/3uxr2lZ
3mm Radial LED (NAV Open/Tilt) - amzn.to/3qTltMm
5mm Radial LED (Manual Security Light) - amzn.to/3aQ5E3f
Colored 5MM LED/Resistor (Cupholder/Coin Tray) - amzn.to/3aSQn1M
1206 SMD LED (Radio/Auto Security Light) - amzn.to/2NZ8j1T
Tools:
Air Soldering Station - amzn.to/3rXuvIe
Solder Braid/Pump - amzn.to/3cIUT4v
Panel Pry Tools - amzn.to/3u946cs
Foot Pedal (for Dremel/Grinder) - amzn.to/3dHqMKX
----------
Support the Patreon: / tunerwithkids
Merch Available: teespring.com/stores/tuner-wi...
Follow Me on IG: / tuner_with_kids
For questions and inquiries: tunerwithkids@gmail.com
-------------------------
#IS300 #LEDLighting #GaugeCluster
0:00 Intro
2:25 Cluster Removal
3:50 Blue Dash Security LED
7:15 Cluster 194/24 Bulb Change
9:40 Lock Cylinder LED
10:45 Glove Box 74 LED
11:20 NAV/Radio/Climate/Console Removal
13:45 Cigarette Lighter Bulb
14:30 NEO Bulb Fitment Fix
15:10 TRAC/Seat Switch Trick
18:20 USB Charger Plug Install
Disclaimer: "Tuner with Kids", the alias for the human content creator for this RU-vid channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and I may earn a commission if you purchase through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used.

Авто/Мото

Опубликовано:

 

3 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 50   
@j0lla127
@j0lla127 Год назад
The LED lights in the cup holder & 12v panel were clean. So tempted to do it.
@how-toswithmark902
@how-toswithmark902 2 года назад
Soldering and heat shrinking everything like a true pro! Clean install thanks for the vid
@tonyg-2jz82
@tonyg-2jz82 3 года назад
Dude you're the man!!! Thank you so much for taking the time to make this video. You have no idea how long I searched for a video where someone actually went into this exact model IS (cuz all I could find were the new 250/350 videos.) I was always wondering about how to switch the colors on the navigation unit and I had actually soldered my window switches and the open close/tilt buttons but seeing what you said about the nav and how it is basically trash ill prolly skip that and just install an aftermarket one and sell the stock one. But still doing this and also showing how you added lights to cup holder etc really made me feel good about not being the only person to have done so but seeing your technique made me go back and fix a few things. Def gotta new subscriber!!
@TunerwithKids
@TunerwithKids 3 года назад
I’m keeping the motorized NAV flip but will be swapping a Android unit in a few months.
@jeepboi96
@jeepboi96 2 года назад
You do an excellent job my guy!!
@UnknownUser-zw9od
@UnknownUser-zw9od 3 года назад
Wow! You’re a mad scientist 👍🏽 if I knew how and have the patients I would totally do this. Great video uncle
@AhmedAhmed-dh7yd
@AhmedAhmed-dh7yd 3 года назад
Wow this is amazing content. Thank you so much for sharing and also providing with the correct amazon links for the bulbs. Much appreciated 🙏🏽🙏🏽
@pirihern9329
@pirihern9329 3 года назад
Don't have a lexus 300 , but some of this I can apply to the is250 and the gs350 f sport. I appreciate your time and well explained techniques. Stay safe paz y salud
@TunerwithKids
@TunerwithKids 3 года назад
Yea you have to do the same to the switches and the cigarette light/ashtray on the 2IS if you want to convert to white. Luckily on newer cars, they don’t have that paint, it’s green bulb covers.
@jaimegomez4538
@jaimegomez4538 3 года назад
awesome job bro , I did mine today but i did it in blue big change thanks man
@intergalacticnews2581
@intergalacticnews2581 2 года назад
Great video thanks 🙏
@pawpatina
@pawpatina 3 года назад
First off, LOVE those wheels. Second, you wanna come do all my leds for me???? LOL
@TunerwithKids
@TunerwithKids 3 года назад
Wishful thinking 😂. I don’t even like doing it for my own cars. Very tedious work.
@pawpatina
@pawpatina 3 года назад
@@TunerwithKids HAHHAAH Touché well ya did an awesome job, I just wanted the gauge cluster then I saw all this.... EBAY HERE I COME!!!
@Inyouremom
@Inyouremom 4 месяца назад
🔥🔥🔥What bulb did you use for the glovebox
@Faded4Life1000
@Faded4Life1000 3 года назад
Nice video! I swapped my cluster/clock/ac lights, and one side of my my clock is dimmer than the other along w the ac lights, could it be the connection? I remember it was a tight fit putting the leds in those holes
@TunerwithKids
@TunerwithKids 3 года назад
It might be a defective bulb.
@markotrd5109
@markotrd5109 Год назад
Awesome Video!! Thank you Do u use 12v to Illuminate the cluster at home?
@TunerwithKids
@TunerwithKids Год назад
Yea. I have an old computer power supply with custom terminals for 12V and 5V.
@markotrd5109
@markotrd5109 Год назад
@@TunerwithKids thanks a lot... I drive a IS200 and i have a Kouki digital cluster and want to test it at home, that's why ask of the voltage for the (bulbs, led's) Illumination
@richlim8919
@richlim8919 3 года назад
Hi all! Is there a way to make the led light illumination in the climate control even? (Or even as possible)? In some areas of the climate control, it is brighter while some are not so brightly illuminated..
@TunerwithKids
@TunerwithKids 3 года назад
I think it has to be a custom setup on the board to get it illuminated fully. I noticed it now after driving for a while that the bulbs don't distribute well and the dials are dim.
@staraplaninasum5116
@staraplaninasum5116 2 года назад
Great job man! I have a question about the climate control leds, mine die after couple of weeks, first they start blinking and they die out. My electrician told me its because they are leds which is weird to me since everybody did it and I dont see no complains? Cheers!
@TunerwithKids
@TunerwithKids 2 года назад
Cheap LED?
@xJaacoby
@xJaacoby 3 года назад
Hey man any idea why when i turn on my headlights and fog lights the clock on the climate control goes out and when the lights are off/ in the first option the clock illuminates. I am having no trouble with the rest of my climate control. I believe the volts are just too high to light up the whole dash at once. But let me know what you think. Thanks.
@TunerwithKids
@TunerwithKids 3 года назад
No idea. Maybe a bad ground or loose connection.
@stephens6063
@stephens6063 4 месяца назад
what’re the bulb sizes for the lock cylinder? i’ve been trying to look for them, looks super sick!
@TunerwithKids
@TunerwithKids 4 месяца назад
I think I custom those. They are a tiny wedge.
@Raulm96
@Raulm96 3 года назад
For the climate control leds which ones will I need I see on the description you but 2 different sizes
@TunerwithKids
@TunerwithKids 3 года назад
It uses both. I think three are the big ones and the hazard light and seat belt are smaller. Or vise versa, don’t remember.
@mrwillywonka100
@mrwillywonka100 3 года назад
Hi ... I noticed you used a 74 LED for the shifter bulb, but on the other side where you have the SNOW and PWR button what bulbs are in there, are these Neo bulbs? Mine at the moment don't light up, didn't know if they were supposed to or not. Any help appreciated... Thanks Clive
@TunerwithKids
@TunerwithKids 3 года назад
They are smaller neo but I had to pull them apart and use the stock mount to fit right.
@stevenhanaford4340
@stevenhanaford4340 7 месяцев назад
Where did you get the neo bulbs for these?
@TunerwithKids
@TunerwithKids 7 месяцев назад
@stevenhanaford4340 check links in description
@manrami
@manrami 3 года назад
At min 12:35 you said you ordered the armrest covers your missing. Can I get a link? Im missing the passenger side :(
@manrami
@manrami 3 года назад
12:20*
@TunerwithKids
@TunerwithKids 3 года назад
The plastic plugs? I found a set used for $15. They are like $25/each at dealer.
@j0lla127
@j0lla127 Год назад
Any idea on how to change the bulb on the DEFROST/AIR RECIRCULATION/AC?
@TunerwithKids
@TunerwithKids Год назад
Did I not show in this video? It may be in my other LED swap video for radio and center controls.
@j0lla127
@j0lla127 Год назад
@@TunerwithKids I checked both videos and both videos, yours do not light up either. At least it doesn't look like it. Unless it's super dim barely noticeable.
@TunerwithKids
@TunerwithKids Год назад
It’s probably very dim. Some of the climate stuff using bulbs that don’t disperse well.
@rustedopus3414
@rustedopus3414 2 года назад
I'd love to change the cigarette ring bulb but not got a clue how I'd go about it, whether I'd need to solder a 74 bulb in etc. Any advice?
@TunerwithKids
@TunerwithKids 2 года назад
That one is tricky. It’s not standard.
@rustedopus3414
@rustedopus3414 2 года назад
@@TunerwithKids I'm thinking I might just grab a coloured silicon cap and try replacing the standard orange one
@algebra358
@algebra358 2 года назад
Man….. the 3x big LEDs are different from your RU-vid video and your Amazon link… one doesn’t fit (the bulb above the socket) EDIT:// Amazon seller (the same link in description) have sent me different bulbs.
@TunerwithKids
@TunerwithKids 2 года назад
It’s what I used. If you watched closely, some of the NEO bulbs ARE NOT plug and play, I had to pull the core out and use the original sockets to fit.
@algebra358
@algebra358 2 года назад
@@TunerwithKids Hi Binh, I am sorry for accusing you for something not your fault, I ordered the same thing you have linked, but the dumbass seller sent me a pack of 18 bulbs with 9smd each side, 36 SMD in total per bulb (crazy)... I contacted Amazon after realizing what the fuck just happened and got a full refund as I ordered from USA to NL. My apologizes.
@raymundorubio2375
@raymundorubio2375 2 года назад
Damn bro 2 commercials
@TunerwithKids
@TunerwithKids 2 года назад
That’s RU-vid for you. They gotta get that bag.
Далее
Lexus IS200/IS300 LED gauge cluster swap!
11:43
Просмотров 54 тыс.
UNO!
00:18
Просмотров 1,8 млн
Installing Reverse Back Up Lights
11:35
Просмотров 90 тыс.
First 5 things you NEED to do to your IS300!!
13:03
Просмотров 108 тыс.
NEW Stereo Headunit INSTALL  //  LEXUS IS300 SportCross
12:58
Install new LED in your Cluster
22:31
Просмотров 20 тыс.
Installing the CHEAPEST Amazon head unit in my IS300
26:18
Watch this before installing a LED bulb
10:20
Просмотров 814 тыс.
01-05 IS300 cluster/Climate control/key ring LED swap
16:03