Lenovo Yoga 910 - not a easy fault to be diagnosed 

I think it's not working for double side pcb..

This board does not have schematic or BV. You have to use oldskool method.

@@pokontroli I found the schematic in one minute.

@@xxycom8963 hey, how did you find the schematic? Can you please share how?

have u still got a link?

If battery has sufficient voltage no charging ic is needed !

@@intrax2tv there is a short circuit though! Is'nt the super io suppose to check if there is any short circuit before starting the boot sequence?

@glyn hodges yeah that explains 👍👍

Look at 1:04:21, when he injects voltage and the chips starts becoming hot. In this case there was not a 0 ohm short, when he injected voltage it started becoming hot but there was some resistance and it was only taking 500mA, which is too much for the chip itself but it's probably not enough to be detected by a thermal camera if you don't already know where to look for

@@gianseven He injected 2.68v at 540mA...that should be over 1Watt of power, it certainly would be a visible difference on a thermal camera

@@gianseven Thanks for the reply. Injecting voltage earlier on at the capacitor Sorin attached a wire to, may have revealed the same issue much earlier on. If the heat can make the alcohol dance like that, its releasing more than enough heat to be detected on a decent thermal camera.

360-370c

@@gile849 thankyou! 🙏

Ohhh yes? you are so smart but wait a moment, where are your video? i see nothing in your channel

@@theflowbox i don't need to post anything

@@g8sbs944 hahaha I see you are anonimous and too smart, everyone can guess from the use of capital letters in your post

@@theflowbox Repair shops are everywhere, not only from people on RU-vid. What he said it's true, if he had done an inspection under the microscope he could have saved some time, (but he probably would have found it later as he first checked one side trying to understand the circuit) many times something this tiny can be overlooked and when you understand what the circuit does you start to look closer for broken stuff around that suspicious IC, but you always could have noticed that before reverse engineering by just looking at it for 10 minutes. Happens all the time with lifted pads/broken traces in vintage hifi equipment. Look at the schematic, try to test a transitor that could case problems if broken and discover one leg is not soldered or its pad it's not connected to the trace anymore, could have started by touching random stuff with your fingers but have been sucked into the black hole of schematics/reverse engineering

@@gianseven Ma se cerchi di capire il senso del mio primo commento dove ho fatto notare che l'utente non ha video nel suo canale... proprio per far capire che questo "è un video in youtube" e non una riparazione fatta in un qualsiasi laboratorio per fini commerciali, a me capita anche di rifiutare riparazioni un po complicate che richiedono troppo tempo e che non sono economicamente vantaggiose... ma io non faccio video per youtube (solo chi lavora in riparazioni e deve pagare arffitto, tasse e bollette può capire) ma non per questo critico i video in youtube che hanno tutt'altro scopo.

Yep making things more complicated so prone to faults and not charging as all charging is now shifted to usb-c ! 😈

NorthridgeFix has some videos of fixing HP laptops with USB-C charging management ICs too. I don't understand the good of usb-c for charging a laptop, only added failure points as far as I can see Edit: this one I think m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-P07K8Vg4uFs.html

@@gianseven It does have advantages, like I no longer need to carry a power supply around: At home I plug in an external monitor and the monitor also takes care of supplying the laptop with power and at work the docking station does the same job :)

Skills are important then thermal camera. Old school.

what kind of tv? which one exactly?

@@Knebebelmeyer iris model 43e2

@@youssefmh sry but i cant anwer u censorship vanish the whole comment