No video :(

Lensmate vs Magfilter | ND Filter For Panasonic LX10/LX15 (Sony RX100 / Canon G7x) | RehaAlev

Подписаться 35 тыс.

Просмотров 53 тыс.

50% 1

Lensmate sent me their filter adapter for the Panasonic LX10/LX15, so I could demonstrate how it works and compare it to the Magfilter adapter that I was using so far. You get similar adapters for your Sony RX100, Canon G7X, and other point-and-shoot cameras. You can purchase them here:
Lensmate for the Panasonic LX10: amzn.to/2sSCH1q
Magfilter: amzn.to/2rzLvFA
Get my Adobe Lightroom Presets and LUTs here :
ko-fi.com/reha...
If you like my work, you can buy me a coffee :
ko-fi.com/reha...
Camera equipment and accessories I use:
MAIN CAMERA
Sony Alpha a7III: geni.us/SNYa7III
Sony 24-105mm f/4 Zoom Lens: geni.us/SNY24105
Sony 55mm F/1.8 Prime Lens: geni.us/SNY55
Sony 28mm f/2 Prime Lens: geni.us/SNY28
Rode Video Mic Pro+: geni.us/RDVMP
SECOND CAMERA
Sony Alpha a6500: geni.us/SNYa6500
Sony 10-18mm Wide-Angle Zoom Lens: geni.us/SNY1018
Sony 16-70mm Vario-Tessar Zoom Lens: geni.us/SNY1670
Sennheiser MKE 200 Shotgun Microphone: geni.us/SHMKE200
GOPRO
GoPro HERO11 Black: geni.us/GPRH11
GoPro HERO10 Black: geni.us/GPRH10
GoPro MediaMod: geni.us/GPMM
GoPro Dual Battery Charger: geni.us/GPDC
Freewell GoPro ND Filter Pack: geni.us/FWSD4K
POCKET CAMERA
Ricoh GR IIIx: geni.us/RGR3X
Sony RX0 II: geni.us/SNRX0II
PHONE
Apple iPhone 14 Pro Max: geni.us/AP14PM
Shure MV88 Portable iOS Microphone: geni.us/SHMV88
DESK
LG 32UN880-B Ultrafine Display: geni.us/oCRg
LG 28MQ780-B DualUp Monitor: geni.us/BRYaB
CalDigit TS4 Thunderbolt Dock: geni.us/CDTS4
Rode NT-USB: geni.us/RDNTUSB
Sennheiser MKE 600 Shotgun Microphone: geni.us/SHMKE600
Elgato HD60 S+ Capture Card: geni.us/EGHD60S
Elgato Cam Link 4K: geni.us/EGCM4K
Focusrite Scarlett Solo Audio Interface: geni.us/FCRS
Nanlite Forza 60 LED Monolight: geni.us/NLF60
Other Accessories:
Feiyutech Scorp-C Gimbal: geni.us/SCORPC
Manfrotto MVM500A Aluminum Fluid Monopod: geni.us/MFTM500
Sirui P-326 6-Section Carbon Fiber Monopod: geni.us/SRP326
Sirui 3T-35K Table Tripod: geni.us/SR3T35
I edit photos with Adobe Lightroom and Adobe Photoshop. Video with Apple Final Cut Pro X and Apple Motion.

Опубликовано:

19 июн 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@CharlesLScofieldJr 5 лет назад

Reha, I want to thank you for this video. I have a Panasonic LX10, I took your advice and purchased the Magfilter adapter, as a matter of fact, I purchased two of them. One for use with an ND filter and one for use with a Circular Polarizer lens filter. By having two Magfilter adapters with the filters premounted it takes less than 15 seconds to switch out filters.

@LDN_BOX 3 года назад

which size filter did you use for the LX10?

@CharlesLScofieldJr 3 года назад

@@LDN_BOX I used a Tiffen 52mm CPL and 52mm Variable ND Filter.

@LDN_BOX 3 года назад

Charles L. Scofield Jr. Cheers for the response, much appreciated! Btw, what was your thoughts on the LX10, were you using primarily for video or photography?

@CharlesLScofieldJr 3 года назад

@@LDN_BOX It has been a great little camera, I got it primarily to shoot 4k video, but it does great for photos too. I just wish it had a greater zoom than it does. I use it whenever I am hiking over rough terrain. I got a fishing vest because it has many pockets and was made of lightweight mesh. Works well when changing out Magnafilters so you don't drop them.

@LDN_BOX 3 года назад

Charles L. Scofield Jr. Awesome, cheers for the tip! I bought it as I have a TZ80 with x30 zoom but wanted something for closer distances and better in lower light for street photography. Can you get bokeh effects whilst shooting people with it at F1.4 or slightly above?

@SusanClarkeatenterin 10 месяцев назад

I installed the Magfilter and I am so disappointed with this thing. The magnets do not align straight. Maybe you didn't have that problem, but it's frustrating. I went ahead and removed it completely. The Lensmate is probably the better option for everyone. And yes, I took great pains to get it aligned right on both the camera and the adaptor. I would not recommend the Magfilter to anyone! I mostly use this camera for photos, the MF was not very secure so I would have never used it for video... (all this is just my humble opinion) I did buy the Magfilter after watching this video, that is why I am commenting here. Really a great idea, but not very functional. Have a great day. =D

@GregYeutter 6 лет назад

Thanks Reha! As a video shooter, I think I'm going to go for the LensMate

@wetbaloney 6 месяцев назад

I had a mag filter polarizer for my zs100. I sold that camera and went for the LX100. It works perfectly on the LX10. No vignetting.

@bookooc5605 4 года назад

I bought the LensMate kit for my newly purchased Rx100 MK7. I took a trip to Europe for 10 days, coming home yesterday. Halfway through the trip, the adapter fell off. The adhesive failed I guess. Not too happy with it. Also, trying to screw a filter on the adapter is difficult at best, especially a circular polarizer. I haven't had a chance to contact LensMate to see what they will do about it.

@CFKoder 5 лет назад

Excellent review. This really helps me make up my mind on ND filter options. Thank You.

@bevoledanxxx 6 лет назад

Just got my LX10/LX15 three days ago and I am so glad to have found your video! Very helpful and very informative. Will definitely get the lensmate. Also, would you kindly be able to make video tips/tricks on taking great photos by using LX10/LX15? This is my first compact camera so still a beginner on this. Many thanks!

@acousticwie 7 лет назад

I was just thinking of buying one for my Canon G7X Mark II. Thanks for the review!

@XanderEwald 5 лет назад

That camera has built-in ND filters though.

@Voggibaer 7 лет назад

You do a great job. Like your Videos and hope to see more...

@StrathpefferJunction 6 лет назад

Just a real shame the Lensmate isn't easily available outwith the USA. Import costs to the UK are astronomical for what it is...but I do think its a neater solution.

@honestinjin10 5 месяцев назад

What size adaptor fits the LX100 and other LUMIX Travel Zoom cameras? Thanks

@apntv 6 лет назад

Useful, thanks, I just swapped my G7Xii for an LX15 as I am a Panasonic shooter and I shoot everything in 4K, just watched a few of your videos which have been quite useful in setting it up, even though I am quite familiar with the LUMIX menus on my G80 and GH5. The LX should be quite useful for those evening shoots where I don't want to take the bigger cams out. Subscribed :-)

@IamNinjaOfNinja 6 лет назад

Do you like the LX10/LX15 better than G7Xii ?

@Alezcollection 6 лет назад

Bought a MagFilter, it fell off and disappeared within a week of owning it because it’s only held up by a magnet. Will never buy again, wasted $30. Purchased a Lensmate afterwards and it’s so much more dependable. Choose Lensmate.

@markgiles3 3 года назад

That was really helpful. Thank you.

@eliseoborrerobass 5 лет назад

I have the magfilter. It does the job, but It has a tendency to jump out of my hands. I guess it's bullet proof but I also was adjusting counter clock wise and it opened up dropping the glass and guts on my floor. I also dropped it by touching it by mistake and the magnet does not hold and the last thing today, the glue dried up and it just came off in my hand. I probably will try the lensmate. I think these are more like novelties that help with the amateur cameras, but it's not a professional solution. I got an SL2 for about the same price as my point and shoot (body only), bought a couple of lenses (wide 10-24mm zoom and a 50mm) and I am a lot happier. Either way, you have to be extra careful when using filters even when they screw onto the lens .

@damon6121 6 лет назад

Really enjoy your videos. Well done.

@wretchedworm Год назад

i don't like the idea of using anything that is adhesive on the camera. do u think this can be taken off cleanly if u ever want to sell it?

@lukaslenner 6 лет назад

This is litteraly day and night difference when using CPL filter. Enhanced my vlogs.

@jahangirkabir9271 2 года назад

how to take a shot with blurry background with this camera?

@allanmacuser 5 лет назад

thank you for the info

@matrixdzab7416 4 года назад

Is it the same size as the one for the sony RX100?

@Campanecampanaridellavalnerina 4 года назад

Is there an accessory, an adapter, to connect an external microphone such as the h2n zoom to the machine? Or a higher zoom?

@benec5816 5 лет назад

Well done great help thank you

@PaulTaylorsNerdRant 6 лет назад

Hi, could this be used to mount a wide angle lens onto it to give me in your shot for vlogging because of the crop factor when shooting in 4k mode?

@Saksikoipi 6 лет назад

I noticed that the magfilter does bring about a slight amount of corner shading at 24mm, but I guess it's easy to remove that in post processing.

@RehaAlev 6 лет назад

not in video as it crops in. I haven't notice any vignetting, but I'll check again.

@DaMatta11 Год назад

Why I need a filter?

@eiyt 5 лет назад

With the Lensmate, what ND filter density number did you get? There are 0.3, 0.4, 0.9 - which is one is most suitable for LX15?

@daviddoyle3174 7 лет назад

So I am a bit confused... I love the magfilter but found a review that said it DID affect corners..do you need the 52mm that the Amazon user tried...or go up to 55mm to eliminate corner issues? Already own lensmate but don't care for its functionality ...help please☮

@RehaAlev 7 лет назад

I don't have any issues, however, the LX10 crops in when shooting video. It may be different for other cameras.

@NicoManansala 5 лет назад

@ david..Which size of filter did you bought without vignet?

@ChrisParayno 6 лет назад

thanks for this! great job

@blutey 3 года назад

Thanks for this video. What actually holds the ring to the camera? Is it glue or magnetism? If glue, how easy is it to remove the glue at a later date without damaging the camera?

@Lunaray100 3 года назад

The metal ring holds to the camera using a custom cut 3M adhesive. If installed correctly, and securing mounted it will last on the camera for years. Should you want to remove it, say when sending the camera in for repair, it is easy to remove using the uninstall tool included with the Kit. Should you lose the uninstall tool you can also use a piece of dental floss. Place the camera on its back, put the dental floss around your 2 index fingers with 2 inches in the middle. Set the dental floss at 12 oclock between the camera and the metal ring, hold the camera steady with your thumbs and pull the floss towards you not up. This will release the ring. The adhesive may have left some sticky residue, just use a tiny bit of alcohol on a que-tip to remove.

@blutey 3 года назад

@@Lunaray100 Thanks!

@hypnosiscenternyc 6 лет назад

GOOD VIDEO. WELL EXPLANATION ... THANKS !

@OstGal 5 лет назад

Which filters do you recommend for the Lensmate?

@romiem 7 лет назад

Great video - thank you. Do you need to take the filter off before switching the camera off or can it remain on whilst the lens is retracted?

@RehaAlev 7 лет назад

+Romiem hi, thanks. no need.

@AtortAerials 4 года назад

Would have been SO much nicer to have a built in ND filter Sony WTF. Who really wants to buy a $1200 camera and then slap crappy adhesive on it covering logos and stuff....not sure why they didn't include that in such a fancy high end point and shoot.

@daviddsouza85 7 лет назад

Helpful vids

@ChristopheLanglois 4 года назад

Hey Reha, thank you for all your tech videos. I have been following you for a long time... just a quick question: in your experience, how easy are those filter adapter to remove from the camera lens? For instance if I wanted to resell it as it came in the box? Cheers, C

@RehaAlev 4 года назад

Not difficult. I removed it from one of my cameras when I sold it.

@ChristopheLanglois 4 года назад

Reha Alev thanks for the quick response! May I ask how you did remove it? Did you use dental floss as suggested in other videos? I’d like to make sure a) there is a safe way to remove the filter and b) the front of the lens is not left damaged (even cosmetically) by using the filter adapter for months on. Cheers, C

@RehaAlev 4 года назад

Correct. Dental floss

@ChristopheLanglois 4 года назад

Reha Alev 👍🏻 Thanks again Reha! 🙏🏻 And no nasty surprises on the front of the lens? The text was in pristine condition?

@bobofthestorm 7 лет назад

Would the lens mate be able to hold to weight of a wide angle conversion lens? Could you try an angle conversion lens?

@RehaAlev 7 лет назад

No idea, but I don't think you can put too much weight on these adapters.

@VideoAssociates 5 лет назад

do u think its stops dust from the sides getting in

@RehaAlev 5 лет назад

don't think so! it will prevent scratches on the front element though.

@scorpio3257 6 лет назад

What do you think of the Kiwifotos LA-52RX100 adapter?

@RehaAlev 6 лет назад

Haven't tried that one, but I believe they are all doing essentially the same thing.

@yauyau8738 6 лет назад

May i ask...what size of ND filters i should buy to fit both adapters ?

@RehaAlev 6 лет назад

yau yau mine is 52mm

@fredhill4442 7 лет назад

What size mag filter should I order for the Panasonic LX15 ? Thanks.

@RehaAlev 7 лет назад

All of them work. I use 52mm

@paulknowles9727 6 лет назад

Hi, Great reviews, especially the Focus problem out takes haha. I've read a review about this Magfilter and they said it created Vignetting at the wide end? Have you noticed this? assuming that in Full HD where the view is not cropped this might happen? Thanks