Let's Replace Mouse Switches - Logitech G502 Lightspeed Double Click Fix 

Great video, really appreciate you going through the entire process with great detail/commentary for switch replacement. I had the dreaded double click issue after 2 years, and replaced them with black Kailh GM 8.0 switches. Even though the camera fell, it made it all the more interesting with the cut scenes.

I had written instructions up on my monitor and I was ready to start taking my mouse apart; but, I am so glad I checked youtube right before doing so, 'cause this was so helpful. Being able to see more of the mouse than just a few pictures, as well as your verbal instructions and advice, were great resources. It took me longer than I expected to remove the switches because by the time I had melted the 3 solder points the first would have solidified again; the wick looked really helpful, I really should pick a spool up. Thanks for the video.

Excellent video. I didn't have replacement switch but instead I opened it up from your instructions of disassembly and simply cleaned the internals and switches with isopropyl alcohol. Works perfect like new again. Thanks for sharing the video, appreciated.

Nice detailed video, I had a different issue but it helped me a lot to see how you disassembled the mouse. Thanks for making this video :)

Thanks so much for this. It was a great help and my G502 is even better now thanks to those "heavier" switches :)

Great video dudes I repaired a friends mouse when he got a new one and gave me his old one just so I could repair it and have a backup. Your video helped a lot

This was an excellent tutorial/video from start to finish that I easily followed and got my main click buttons replaced within 2 hours of casually doing it. Thanks for taking the time to curate this and look forward to more. Also I dig the iFixit & parts keeper kits.

I want to show my appreciation to this video. Today I just successfully replace my click switch by following details of your video. This is an amazing video that thoroughly narating the process of replacing click switch. Thank you so much for your tutorial, and Kudos to you, sir.

Great Video! You helped me out a lot. Now everything is klicking nicely.

Finally;;), i changed my switch myself today and its working so happy, didn't wanted to buy another mouse. Thank you for this video

Great video! My G502 Lightspeed started doing the double click after 4 years of heavy daily use. Will absolutely be replacing the switches on it, tho kind of sucks how many screws there are! Logitech are notorious for problematic input devices and their mindset is definitely "just buy a new one". My G613 keyboard started doing the double type thing around the same time as the mouse issue so will fix that when time permits. Also, only real men use heavy mice! ;)

Ty for your teardown video! Soo helpful! I saved some serious $$ and a mouse from tthr landfill.

hey! There is no need to remove the battery :) Thank you for the video!

Logitech is really over complicating mice. Too many parts. Too many screws.

Thank you so much dude, this video helped me a lot.

I followed it all the way through but now my scroll wheel is not registering, it registers the click but not the rotation of the wheel. Where do you think I messed up at?

great video. btw you lost a screw (it was missing and never removed in your video), its insert is somewhere on the top right of the area you were showing that had the 8 screws you counted towards the end.

Nice vid, Thanks.

very instructive video, it instructed me to buy a new one😅

Good video, thanks heaps. Hopefully those 2 little springs on the middle click don't matter too much as mine have gone. I should have watched this video first...

Excellent breakdown, thank you. I don't have any soldering equipment, so might actually be cheaper for me to buy the new mouse, I hear the new G502 Z Plus have optical switches which don't have the double clicking issue... Maybe the easier way to go for me as much as I'd like to reduce waste and replace the switches on my G502 Hero :(

I once stripped the metal parts of the ribbon cable and destroyed them after finishing every micro switch soldering :( I was so glad once I realised it wasn't destroyed that bad and only had to remove the metal parts that is touching other metal parts inside ribbon cable. These ribbon cables are so freaking hard to insert xd

Helped me a lot! Thank you!

My mouse is working fine again, but I have a issue that randomly appears. some times my left mouse button registers it being pressed down at random and keeps giving off a signal of being pressed. It only disappears if I click it like 3-5 times. Any idea what could be causing this? (I'm using the exact same switch as the original)

Mine just started to do the double click thing couple months ago about June or July. was gonna do an RMA but when i looked at my receipt I bought the mouse in March of 2020. Way past the manufacturer warrenty date. I ended up buying a Corsair Dark Core RGB pro se to replace it yesterday. Might try this repair fix though just for the heck of it.

It was such a pain, on top of that a screw in each left and right click buttons got stuck and I spent the entire afternoon messing around and hammering them with screwdrivers til they came off 😭

Also just a question. How many switches do you recon is needed. If I need to replace just the leftclick?

Can you mod the battery capacity and replace it with a larger capacity one? Can you fit it in the case? Is enough space to put like double or triple capacity battery?

where did you pick up the switches from and how many clicks are they ?

Hi man, could you please link me. The soldering stuff. Im not sure what that is. So i wouldnt wanna buy some crap, that i dont need. Thank you.

Thats one thing my cheap rog Wireles Mouse does better, there the switches are replaceable from the get go. But overall i preffer the hero.

Man this is a lot of work to replace one faulty switch. You’d think there’d be an easier way to get to the switches without having to disassemble the entire mouse…

Wait what r u replacing u took the entire thing apart💀

I got this issue on my wired G502 after 5 years of use. Just bought another one brand new for $30 instead of spending that on soldering equipment and switches.

llegue a creer que iba a tener que vivir con ese double click

Logitech took a huge quality hit when they changed to chinese switch manufacturers.

Your link goes to a cat spray...

Never buying Logitech again.

Please don't say "repair" when you just replace the switch. I want to actually repair them. How do you open them