Тёмный

LET"S RESIN Molds, Dyes and Pigments 

Ken Moon
Подписаться 74 тыс.
Просмотров 99 тыс.
50% 1

LET"s RESIN on Amazon got a hold of me and asked that I checked out some of their molds, dyes, and pigments. I told them I would love to. Wow, these are fun to play with.
LET’S RESIN Products I used in this video:
4 pcs Silicone Coaster Molds - amzn.to/2rRQI0L
20 Colors Epoxy Pigments - amzn.to/2NRuowx
14 Color Alcohol Ink Set - amzn.to/37aqTJt
Jewelry Box Molds - amzn.to/2CQLHry
LET’S RESIN
Amazon Store - amzn.to/2rL7PBa
Their Web Site: letsresin.com/?ref=lh2wozftr3y
Use Resin5 for 5% off your order
More down here ↓↓↓ Click SHOW MORE!
Thanks to Total Boat - www.totalboat.com
Use Code MPC20 for 20% off
Thanks to Starbond - www.starbond.com/?rfsn=308130...
Use Code MPC10 for 10% off
Thanks to Ack's Wood Paste - ackswoodpaste.com/
Use Code MPC10 for 10% off
Where can you find me?
Find my Facebook Page / moonpiecreations1
Find my Instagram / moonpie_creations
Find my Twitter / mpc_ken
Find me at my Webpage MoonpieCreations.com
Product I Use:
General Tools MMD4E Digital Moisture Meter - amzn.to/2ZQnuui
amzn.to/2MVp6Ro
Pinnacle Cryogenic Fingernail Grind Bowl Gouge 1/2" - amzn.to/2WEl2G5
Pinnacle Cryogenic Fingernail Grind Bowl Gouge 3/8" - amzn.to/2VcxyfD
NOVA SuperNOVA2 23055 Wood Turning Chuck Insert Type - amzn.to/2UpTYgj
NOVA G3 Chuck Without Threaded Insert - amzn.to/2UiuRgs
PSI Woodworking LA11418 Headstock Spindle Adaptor (1 ¼” to 1” x 8TPI) - amzn.to/2FPv6pb
6” Quick Release Bar Clamps - amzn.to/2FK2TQt
Laguna Tools MLAREVO 1836 Revo Lathe, 18"/36", Black - amzn.to/2UewHPa
AdTech W9201 Drip-Less Full Size High Temp Hot Glue Gun - amzn.to/2uIqcoJ
Aluminum Honeycomb Grid Core, 1/4" Cell, 12"x16"x 1.00" - amzn.to/2HTMHjc
Jacquard Pearl Ex Powder Pigments - amzn.to/2HVf14q
Craftsman 9-36857 3 Piece Wood Chisel Set With 3 Blades - amzn.to/2HWf9AI
Woodpeckers Ultra-Shear Wood Lathe Chisel Set, Full Size - amzn.to/2OFIWyh
1/32"- 5/8" Self-tightening Keyless Lathe Drill Chuck W/ MT #3 - amzn.to/2I9v0eS
NOVA Cole Jaw Set 10” - amzn.to/2uEktjP
Easy Wood Tools 4 1/2” Diameter x 1-1/4” x 8 TPI - amzn.to/2FMc9Uh
Yorkshire Grit and Hampshire Sheen www.thewalnutlog.com/
Easy Wood Tools Full Size Easy Rougher - amzn.to/2WHErpC
Cellulose Sanding Sealer - amzn.to/2HU61g3
Combination Square 12 In - amzn.to/2V9hhvi
* Some links may be affiliate or sponsor links. Purchasing or even clicking through these links will help support me and the content I provide for free. Thank you very much for your support!
DISCLAIMER: Please note that my channel is for entertainment purposes only. Don’t be stupid. You should NOT rely solely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner or electrician and working with machinery and electricity can be dangerous. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

Хобби

Опубликовано:

 

15 ноя 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 247   
@WowplayerMe
@WowplayerMe 4 года назад
This video really Resin-nated with me. looks like a lot of fun to make!
@MoonpieCreations
@MoonpieCreations 4 года назад
Bahahhahahhahaha, now that there is funny. Ken
@williamellis8993
@williamellis8993 4 года назад
Good one.
@jessicaraelene5276
@jessicaraelene5276 3 года назад
This is my first video of yours. I love the love you have for Leanne. So sweet.
@MoonpieCreations
@MoonpieCreations 3 года назад
She is an awesome person. Thank you.
@Cy_an1d3
@Cy_an1d3 3 года назад
I appreciate the little song and graphic you put over your wife. It made me happy that you give her love and affection.
@MoonpieCreations
@MoonpieCreations 3 года назад
She is awesome. I was lost and would be lost without her.
@lindar1788
@lindar1788 4 года назад
Thank you soooo much for doing this! I recently came across those molds and I wasn’t sure about it. These look awesome and fun!
@MoonpieCreations
@MoonpieCreations 4 года назад
They are so much fun. I did a few with my 8 years old grand daughter and she loved it. Make sure to use all safety precautions Ken
@garythomas6866
@garythomas6866 4 года назад
Looks like a lot of fun, the colors are super, thanks for sharing.
@MoonpieCreations
@MoonpieCreations 4 года назад
I was surprised at the blue and purple. They were super vivid. This could become addictive. Ken
@DesertBumWoodWorkn
@DesertBumWoodWorkn 4 года назад
Those are really cool molds and they're ready to put together and use. thanks for sharing
@MoonpieCreations
@MoonpieCreations 4 года назад
Hahahahaha, I felt stupid when I realized it was a ring box. Hell I picked it out. Ken
@paulsmessyworkshop
@paulsmessyworkshop 4 года назад
Ken, that is really cool stuff. Amazing how well the parts fit together.
@MoonpieCreations
@MoonpieCreations 4 года назад
I was surprised they fit together so well. LET'S RESIN has really dialed them in. I bought a few more of the boxes too. Ken
@cmlmocha69
@cmlmocha69 4 года назад
Thank you for showing how easy it is to work with resin, alcohol dyes, and pearlescent pigments. It looked like so much fun. I think homemade gifts are the best! I bet you could mix in glitter or some jewels like Swarovski birthstone crystals for the grandbabies
@MoonpieCreations
@MoonpieCreations 4 года назад
Yes you can. This was super fun, so much so that my 8 year old granddaughter wants to try it. lol. You can mix in most anything. Ken
@SteveC38
@SteveC38 4 года назад
Great video Ken! It looks like loads of fun for the whole family!
@MoonpieCreations
@MoonpieCreations 4 года назад
Steve, I was sceptical when they sent me the molds, dyes and pigments, but wow, that purple was vivid. I haven't been able to get that from the Jacgaurd Alcohol inks. I think I will use them in a bowl soon. Oh and yes it was super fun. Ken.
@lekzyjolie2600
@lekzyjolie2600 3 года назад
I like how simple you explained everything
@isabellabinion313
@isabellabinion313 4 года назад
Nice colors! I need to get my hands on some molds and such. Bet they’d be nice to make some ornaments as gifts!
@MoonpieCreations
@MoonpieCreations 4 года назад
They have so many molds....ugh. I am getting a discount code from them shortly. You can check their site out at this link if you are interested. letsresin.com/?ref=lh2wozftr3y Ken
@lesigmo
@lesigmo 2 года назад
I have used Let's Resin for a few years - have never been disappointed with any of their products - and, they are always packaged so nicely !!!
@MoonpieCreations
@MoonpieCreations 2 года назад
The only issues I have had are the reaction of some of the inks with certain types of resin. Thanks
@lyndaowen2154
@lyndaowen2154 2 года назад
This is the top of resident work I do. There’s a lot of different different techniques to cause different affects and mixing of colors for coasters to jewelry to bowls. It can be a lot of fun.
@glorytoukraine.against_wars
@glorytoukraine.against_wars 4 года назад
I liked the color "coffee with milk" ☕ But every color is unusual and beautiful!
@MoonpieCreations
@MoonpieCreations 4 года назад
lol, These pigments are pretty good. I'm going to try some on one of my bowls soon. Ken
@ninaselwell
@ninaselwell Год назад
You two melt my heart. I love your love. 🥺
@MoonpieCreations
@MoonpieCreations Год назад
Thank you ❤
@bgpappy30
@bgpappy30 4 года назад
Thank you let’s resin for letting him have the colors and thank you for another great video
@CookingGuy815
@CookingGuy815 4 года назад
Hello Patrick McNeese
@MoonpieCreations
@MoonpieCreations 4 года назад
Thanks Patrick. It was very generous of them. Ken
@kittieknight1539
@kittieknight1539 Год назад
the Blue box and heart shape box are awesome...the coasters are cool too. that is a really super set.
@MoonpieCreations
@MoonpieCreations Год назад
Thank you 🤗
@jeffroitero4266
@jeffroitero4266 4 года назад
Yeahhhh man. We really dug this video. Good on Lets Resin for getting you involved. Their stuff looks really nice and accessible to folks who don't ordinarily mess with this kind of thing. Riss and I jumped on Amazon to check some of it out. Looks like it'd be a fun way to get familiar with using resin in general.
@MoonpieCreations
@MoonpieCreations 4 года назад
Hey Jeff, this was super fun. If you do decide to do this please make sure to use safety items. You should always use a mask, gloves and safety glasses when handling resin. Although TotalBoat 2:1 doesn't put off any orders I am sure there are some particles in the air. I would love to see what you guys make if you do get some of the molds. I ordered a few more boxes. Ken
@jeffroitero4266
@jeffroitero4266 4 года назад
@@MoonpieCreations - Thanks for looking out for us. Ultimately, it'll be up to the wife if we do it. If she's into it, we'll probably play around with it. It definitely looks like fun.
@mattd390
@mattd390 4 года назад
Great video! We get tons of great information AND a very entertaining video! This channel rocks! 👍
@MoonpieCreations
@MoonpieCreations 4 года назад
You rock! Thank you.
@ChristineJonah88
@ChristineJonah88 2 года назад
I really enjoyed your video. I just bought a friend something made with resin. It got me wanting to get started in this craft.
@MoonpieCreations
@MoonpieCreations 2 года назад
Making small jewelry boxes and jewelry is super fun.
@carolriley569
@carolriley569 4 года назад
Very cool...love it!
@MoonpieCreations
@MoonpieCreations 4 года назад
Thank you Carol. Ken
@casoriginal
@casoriginal 3 года назад
Let's Resin is one of my favorite companies. Their powders are amazing too.
@MoonpieCreations
@MoonpieCreations 3 года назад
Yes they are!
@karenmclaughlan9128
@karenmclaughlan9128 3 месяца назад
What is their epoxy resin like plz
@casoriginal
@casoriginal 3 месяца назад
@@karenmclaughlan9128 Their resin is really nice to work with. Way better than the brands you can buy at the craft store. It doesn't make my entire house smell either.
@mookzmom
@mookzmom 4 года назад
It’s good to see that this resin works pretty well with molds. I’m planning to try using little ultrasonic jewelry cleaner machine to get rid of bubbles until I can afford a pressure pot. The resin you showed is quite a bit cheaper than most other kinds, nd I love the idea of just using pumps instead of weighing the stuff. Do you store them with the pumps in the bottles,or if not, how do you keep the pump tops clean and cleared for the next use?
@MoonpieCreations
@MoonpieCreations 4 года назад
I would suggest Thickset or the Makers Resin. Both will work good without a pressure pot. I poured a 2 1/2" platter and got almost no bubbles in it. I store the pumps in them, but my last pump I lock them down. I just wipe the tip of with a paper towel. Use MPC20 for 20% off if you do buy TotalBoat. I would love to see some of your work. Hit me up on Facebook at Moonpie Creations. Ken
@satyar.t2921
@satyar.t2921 3 года назад
Y’all adorable together❤️
@MoonpieCreations
@MoonpieCreations 3 года назад
Well thank you.
@SheWritesHerJourney_
@SheWritesHerJourney_ 2 года назад
Wow these are stunning!!
@MoonpieCreations
@MoonpieCreations 2 года назад
Thank you! 😊
@SheWritesHerJourney_
@SheWritesHerJourney_ 2 года назад
@@MoonpieCreations you’re welcome ☺️
@wendydayz6673
@wendydayz6673 2 года назад
I bought a “ Lets Resin” kit and I’ve had it a couple of weeks bc I want to use my products correctly and not waste them. I’ve been watching videos for info. This has been, by far one of my favs bc they are very informative. Thanks!! Oh and btw I have some of the same inks in my kit and I can’t wait to use them now, seeing how pretty they are.
@MoonpieCreations
@MoonpieCreations 2 года назад
Thanks for sharing!! I am glad it helped. Good luck on your resin journey.
@wendydayz6673
@wendydayz6673 2 года назад
@@MoonpieCreations thanks!
@TealCheetah
@TealCheetah 4 года назад
Things I have learned: *HOT resin will adhere to the silicone. Be super careful when popping bubbles. Ive ruined several molds this way. *pre-warming the molds in a toaster oven set on the lowest possible helps the resin flow better into the mold. Note, warm resin is more viscus, causing colors to mix more if you're using more then one color this can be a problem. *I like to dust molds with corn starch just to make extra sure the resin doesnt stick
@MoonpieCreations
@MoonpieCreations 4 года назад
Used mold release and it worked perfect. I have seen people warm the molds and I think I may try it. Thank you. Ken
@Missy197666
@Missy197666 3 года назад
Thank you, your comment is the first one that I’ve ever read that was helpful and made sense.
@Jeffreysaunt
@Jeffreysaunt 3 года назад
I’ve never heard about using corn starch before! I can’t believe I haven’t thought of that.
@babysaho9576
@babysaho9576 3 года назад
That is interesting. Doesn't the corn starch leave tiny pits in the resin?
@sashabraus6505
@sashabraus6505 3 года назад
@@Missy197666 same
@dawnbuteau6140
@dawnbuteau6140 2 года назад
Love their molds
@MoonpieCreations
@MoonpieCreations 2 года назад
Very worth the cost too.
@Tiger804
@Tiger804 2 года назад
Hi , I have an order of a cat paw trinket box mould arriving some time tomorrow,,, plus a European pandora style bead tray mould,, can wait tomtry them out!!! The cat paw one should be interesting with flakes glitter in the resin, all the moulds you did are lovely.👍🦋💐🍁
@MoonpieCreations
@MoonpieCreations 2 года назад
Wonderful! Have fun with them.
@everybodypanic2924
@everybodypanic2924 4 года назад
Idea sir. Do small amounts for all the colors and pour them in ice cream trays. Then you would have visual references of how all the colors look by themselves and you can compare them with wood samples.
@MoonpieCreations
@MoonpieCreations 4 года назад
Hey that's a very good idea. Thank you. I have about 10 silicone ice trays I can use. Ken
@miladyblue5077
@miladyblue5077 4 года назад
This was a lot of fun - trying out something new. I hope this gets good business for Let's Resin AND for you, Ken. It was a good idea to try these out as you did. Though you had never used the molds before (I presume) you do have resin experience. It was also a good test to show Leigh Ann, who did not have mold or resin experience able to use the products successfully. LOL, you should do commercials! P.S. Nice to meet you, Leigh Ann! Glad you had fun with the resins. Now you see what keeps Ken in his play room so much. We might even get to see more of you in the future if you get hooked on playing with resin, too!
@newmooncreations2441
@newmooncreations2441 4 года назад
LOL - you are right Milday - Ken should do commercials (or teach DRAMA classes) Ha ha. I did enjoy the resin but my love is pyrography. Maybe we will do a video clip of my work at the end of one of his videos one day.
@newmooncreations2441
@newmooncreations2441 4 года назад
OH! And nice to meet you too.
@MoonpieCreations
@MoonpieCreations 4 года назад
Hahaha, we had a blast. LeighAnn has been doing wood burning and she's pretty good at it too. I'm kinda jealous how easily she became good at it. :) Ken
@mikebass823
@mikebass823 3 года назад
Cool ideas👍👍😎
@carolinelaferla2802
@carolinelaferla2802 2 года назад
All your work is beautiful what I would like to ask please is how long did you leave it to dry properly please
@MoonpieCreations
@MoonpieCreations 2 года назад
Thank you. TotalBoat 2:1 cures pretty quick. We left these for 24 hours., but it was hardened in 8.
@rebekahalana
@rebekahalana 4 года назад
Oooh ... You could make resins casts of the back of the coasters & when set put them into the other side to make "stained glass" coasters ... That could be fun
@MoonpieCreations
@MoonpieCreations 4 года назад
That sounds pretty cool. Thanks for the suggestion. Ken
@shawnafernandez5764
@shawnafernandez5764 4 года назад
Fun stuff!
@MoonpieCreations
@MoonpieCreations 4 года назад
Too much fun. I have jewelry boxes and coasters all over the place now. lol Ken
@lyndaowen2154
@lyndaowen2154 2 года назад
Usually you can tell what color you get after it dries by looking at the color after mixing on your mixing stick. That will give you a good idea of what it will look like once it’s dried usually.
@beverlyfrederick7670
@beverlyfrederick7670 3 года назад
Especially loved the blue box. I too worried when you torched. They always say do not torch or even heat gun in a mold... apparently can very easily ruin the molds and they cost too much to ruin.
@MoonpieCreations
@MoonpieCreations 3 года назад
These were pretty sturdy. I have used them many times since.
@chevyracings10
@chevyracings10 3 года назад
wanting to try resin art actually thank you for the video. how do you get the air bubbles out? how long does it take to dry? and what did you use the blo torch for???
@MoonpieCreations
@MoonpieCreations 3 года назад
Hey J, I used a pressure pot on this to get all the bubbles out. You could use a vacuum too. TotalBoat Resin takes about 72 hours to fully cure but I can usually start turning it within 8 hours. Any heat source will work to get bubbles out.
@islandcharlie7132
@islandcharlie7132 4 года назад
That stuff is cool.
@MoonpieCreations
@MoonpieCreations 4 года назад
It was super fun to do too. lol. I'm gonna make some molds with my granddaughter today. She's 8. Ken
@williamellis8993
@williamellis8993 4 года назад
Those are really neat, Ken. I haven't been a resin fan before but now I have to try those. How would they work in a pressure pot?
@MoonpieCreations
@MoonpieCreations 4 года назад
I am making an insert with layers on it now that will fit in the pot. It should remove all bubbles. They have a bunch more molds on their page. I am going to buy all of the jewelry boxes they have. I think they will sell for $5-$8 each at craft fairs. Ken
@laylapennington940
@laylapennington940 3 года назад
Just subscribed, but it’s precious how Leanne thinks of her grand baby’s in everything! Ok so I’m wanting to begin my resin journey with small jewelry charms, how long does the resin need to sit in order to cure completely? Approximately,....
@MoonpieCreations
@MoonpieCreations 3 года назад
Depending on the resin it can take 16-20 hours to fully cure. I usually turn my bowls in about 8-12 hours. Hahaha she lives for those kids.
@Msjangel1973
@Msjangel1973 3 года назад
Hi I am brand new to resin. I really enjoyed your video.
@MoonpieCreations
@MoonpieCreations 3 года назад
Thank you.
@seethecee
@seethecee 4 года назад
If you want to try the ink drop/petri dish effect get the Jacquard white it works the best. And use tooth picks to get the little bubbles out of the corners ;)
@MoonpieCreations
@MoonpieCreations 4 года назад
Carla, I noticed that Jacguard Alcohol Ink has a reaction to resin and spreads out quickly. I showed it in one of my recent videos. Toothpicks are a good idea. Thank you. Ken
@jodijenkins3904
@jodijenkins3904 3 года назад
Where did you order the hearts from.? I can't find them anywhere
@melmendes2181
@melmendes2181 3 года назад
Muito legal essa arte e esses moldes
@audreyscreations8123
@audreyscreations8123 3 года назад
How long does it take to dry?
@t0biz0id87
@t0biz0id87 4 года назад
Question for heart! I want to make Legend of Zelda heart with red in smaller heart & clear on the outside how do you pour? Let red dry then do the clear????
@MoonpieCreations
@MoonpieCreations 4 года назад
I would pour the red and then the clear. I would let the red cure then I would pour the clear. It would make it look like the red heart is inside the clear heart.
@t0biz0id87
@t0biz0id87 4 года назад
@@MoonpieCreations Thanks! :)
@jpwoodwork
@jpwoodwork 4 года назад
awesome sir ken!
@MoonpieCreations
@MoonpieCreations 4 года назад
jp woodwork oh nice I’ve been knighted by King Jamie!!! Yes!!!!
@SteveC38
@SteveC38 4 года назад
Very Cool Brother👍 👑👑👑👑👑👑
@steeleforce13
@steeleforce13 3 года назад
Very amazing crafts. Did you both wait 24hrs to cure it all or used some UV device??
@MoonpieCreations
@MoonpieCreations 3 года назад
The 2:1 takes about 4 hours to become hard enough to handle. 8 hours is best.
@steeleforce13
@steeleforce13 3 года назад
@@MoonpieCreations ok thanks in advance!
@loreleirez6743
@loreleirez6743 2 года назад
I don't know if someone commented this or not, but alcohol inks have a really cool affect when you use them properly. You can use them like you did for the blue heart dish. But usually its one drop of color, then drop one drop of white into the center of that colorful spot you had made. And just continue that process until you get your desired affect. You will see the alcohol ink reacting with the white almost instantly, the colors with move around and spread. And in the end, it will have a cool looking 'petri dish' affect to it! I hope this helps, but sorry if someone already said this!
@MoonpieCreations
@MoonpieCreations 2 года назад
Thanks, I've seen people use them like that. Has a cool look to it. I may try it on a larger scale soon.
@loreleirez6743
@loreleirez6743 2 года назад
@@MoonpieCreations Mhm! Yeah I agree, it is cool. Okay I hope you enjoy making said creation with the inks :)
@Mamas-Madhouse-Creations
@Mamas-Madhouse-Creations 2 года назад
When demolding your pieces spray a bit of isopropyl alcohol down the side. They slide right out of difficult molds😉
@MoonpieCreations
@MoonpieCreations 2 года назад
Thanks for the tip.
@patriciaallen9495
@patriciaallen9495 3 года назад
How long does it take for the epoxy resin to dry inside of the molds??
@MoonpieCreations
@MoonpieCreations 3 года назад
Using TotalBoat 2:1 slow around 4 hours.
@macewen1
@macewen1 3 года назад
What's the cure time on this stuff?
@jyohe09
@jyohe09 4 года назад
Not like there is a real wrong or right way to use them but i have been putting cork on the flat side of the coaster and keeping the lip up as a sort of "containment" area
@MoonpieCreations
@MoonpieCreations 4 года назад
Not a bad idea there. Thanks for sharing. Ken
@bubblemum
@bubblemum 3 года назад
Most of the fun of resin is experimenting!
@MoonpieCreations
@MoonpieCreations 3 года назад
So true.
@moonchildtarot222
@moonchildtarot222 2 года назад
Did your resin bottles come with the pumps?
@MoonpieCreations
@MoonpieCreations 2 года назад
Yes all total boat gallons go out with corresponding pump
@ivyhardy4823
@ivyhardy4823 3 года назад
How long do you use the lighter on it???
@MoonpieCreations
@MoonpieCreations 3 года назад
Just a little. Don’t get to close.
@livinlife2286
@livinlife2286 3 года назад
How many drops and how long to use the heating gun for
@MoonpieCreations
@MoonpieCreations 3 года назад
How many drops depends on the deepness of color and the type of dye you are using. The heat gun is very quick just enough to pop any bubbles.
@isabellabinion313
@isabellabinion313 4 года назад
Hey Leanne! Nice to meet ya! (Hope I spelled their name right!)
@MoonpieCreations
@MoonpieCreations 4 года назад
Hahahaha, no worries. Her first name is Leigh and her middle is Ann, but it was legally shortened to LeighAnn years ago. It took me three years to spell it right. :) Ken
@SQUIRRELSETH1
@SQUIRRELSETH1 Год назад
I ordered mine last night cant wait to do this my grandpa and i did lazy Susans so now i want to try something different this looks way more easy then doing lazy Susans lol
@MoonpieCreations
@MoonpieCreations Год назад
I have the molds for a lazy Susan, but still haven't tried it. Sounds like a fun project. I bet your grandpa had fun. I know I do when crafting with my granddaughters.
@SQUIRRELSETH1
@SQUIRRELSETH1 Год назад
@@MoonpieCreations yes alot of fun he pass away last month but what i have learned from him im going to try and do it on my own and see what happens do you have tiktok?
@chellegriggs
@chellegriggs 4 года назад
I bought these items through your links...can't wait to create with my grandbabies. I don't have the resin yet, is total boat what I would use? And is it safe for children? Probably silly question, I saw a horrible video of a woman that had been doing resin on cups (without ventilation) he she ended up getting sick and she is saying she thinks it's because of the resin. I know if I choose to do resin I will use an air mask of some sort, but wasn't I'm assuming if the weather is good, outside would be best?
@MoonpieCreations
@MoonpieCreations 4 года назад
I saw that video also. I use 2:1 Slow (I am thinking of getting Fast). I mix it without a mask and have never had an issue. BUT, you should always use a mask, gloves and safety glasses when handling resin. A respirator it highly advised while turning it. No matter what someone says you are still handling chemicals. The Resin I use was originally made for fiberglass boats so we are sort of repurposing it. Is resin safe for kids? It was not made for kids, but with proper safety and supervision I think (this is my own personal opinion) that they will be alright. Ken
@mireyaquintero7259
@mireyaquintero7259 4 года назад
If I want to add glitter can I use it too, I’m new to this, thank you
@MoonpieCreations
@MoonpieCreations 4 года назад
Yes you can add glitter to the resin. I think it adds a cool effect.
@archfiendonyx6130
@archfiendonyx6130 3 года назад
Absolutely
@jujulagessegaljewelery5667
@jujulagessegaljewelery5667 4 года назад
What is the best resin to use for moldes please .
@MoonpieCreations
@MoonpieCreations 4 года назад
I am partial to TotalBoat Thickset. It is a lot thinner than other resins and allows bullows to surface easier. But it does take three day for it to set. I used 2:1 in the video and I did get a few small bubbles. Ken
@jujulagessegaljewelery5667
@jujulagessegaljewelery5667 4 года назад
Moonpie Creations thank you for reply 😊
@nanaof6babies
@nanaof6babies 3 года назад
My husband has a LeAnn too!
@MoonpieCreations
@MoonpieCreations 3 года назад
Lucky guy. I know I am.
@frankd4253
@frankd4253 3 года назад
I like mica powder more. I used the dye first but I'm into the mica powder
@MoonpieCreations
@MoonpieCreations 3 года назад
It all depends on the look you are going for. I'm a bigger fan of Mica also. Thanks for sharing.
@frankd4253
@frankd4253 3 года назад
@@MoonpieCreations not saying anything bad about the dyes just stating that after I used the mica powder thats what I stick with.
@MoonpieCreations
@MoonpieCreations 3 года назад
@@frankd4253 I was agreeing with you. I like the micas better too.
@frankd4253
@frankd4253 3 года назад
@@MoonpieCreations the.main thing i like about it is you can basically paint it on the molds to only change the color of those parts.
@anonymouspotato
@anonymouspotato 3 года назад
Hey! I want to start doing resin crafts and I have a small question. Can I use UV resin dye for Epoxy resin?
@MoonpieCreations
@MoonpieCreations 3 года назад
Sorry I have never used UV resin dye before.
@anonymouspotato
@anonymouspotato 3 года назад
@@MoonpieCreations oh ok. Thanks for answering!!
@tauheedahjones6079
@tauheedahjones6079 Год назад
Can I use the box and lid for a chocolate box??? I want make a chocolate box and put chocolate strawberries ini
@MoonpieCreations
@MoonpieCreations Год назад
I don't see why not. TotalBoat is food contact safe and has no BPAs. It also does not leach toxins into the environment after it cures.
@sarahdermody6665
@sarahdermody6665 3 года назад
how come you mixed 1:1 when it says 2:1 on bottle? Anyway, liked video :)
@MoonpieCreations
@MoonpieCreations 3 года назад
The pumps are designed to dispense at the correct amount. The small bottle pump only dispenses half of what the big one does. Thanks for letting me clear that up.
@dswatik99
@dswatik99 3 года назад
do you not mix you resin and hardener together>
@MoonpieCreations
@MoonpieCreations 3 года назад
I mix it with the resin yes.
@KirkFields
@KirkFields 3 года назад
Very helpful, and cool to explore with y'all. 👍 Annnnnd #Thanks4TheShare ☺️
@t0biz0id87
@t0biz0id87 4 года назад
Which size total boat did you order? & which kind?
@MoonpieCreations
@MoonpieCreations 4 года назад
I always get the gallon 2:1 slow or thickset. But they sell the quart size also. You can get 15% off with moonpie15
@t0biz0id87
@t0biz0id87 4 года назад
Thanks again!
@lilycessna3077
@lilycessna3077 4 года назад
Question: I too bought alcohol ink from "Let's Resin". The instructions say to add one drop of colored alcohol ink in and ONE drop of white on top of it. Also, says not to stir the resin after ou add the alcohol ink . Now it's talking about making a petri dish? So can I assume this instruction is only for a petri dish? And is petri dish like the round mold?
@MoonpieCreations
@MoonpieCreations 4 года назад
Lily, I would say yes it is for the petri dish look. YOu can do it on any of the molds for coasters. But when doing a pour you should add and mix to what you want it to look like. Remember the Inks darken over a few minutes. So you may want to do a few drops mix and wait. Ken
@lilycessna3077
@lilycessna3077 4 года назад
@@MoonpieCreations Thank you! Yeah I was gonna say, when doing a mold you GOTTA stir to see the color results. Surely, they're referring to petri dishes LOL
@sapnarao6112
@sapnarao6112 2 года назад
You don't use a organic vapour respirator mask is that safe?
@MoonpieCreations
@MoonpieCreations 2 года назад
I know some people have issues with resins, but this resin really doesn't put off fume. The people who have issues with it might be allergic to it. I've worked with some resins that have a noxious order, but TotalBoat isn't one of them.
@janelollipop2759
@janelollipop2759 2 года назад
Which is better mica powder/pearl pigment
@MoonpieCreations
@MoonpieCreations 2 года назад
Mica and alcohol pigments both have their goods and bads. Then you get into pearled and translucent. Bothe are good. It all depends on what you are trying to do.
@janelollipop2759
@janelollipop2759 2 года назад
@@MoonpieCreations thank you . God bless
@MoonpieCreations
@MoonpieCreations 2 года назад
@@janelollipop2759 anytime.
@donaldtrabeaux1305
@donaldtrabeaux1305 4 года назад
Awesome
@MoonpieCreations
@MoonpieCreations 4 года назад
thank you Donald. Ken
@WoodenItBeNice
@WoodenItBeNice 4 года назад
Hi Ken, Great video. Are they available in the UK? Cheers, Huw
@MoonpieCreations
@MoonpieCreations 4 года назад
Huw, I am checking with them now. I will give you a link if they do. Ken
@MoonpieCreations
@MoonpieCreations 4 года назад
They sand you can order from their website letsresin.com/ Usually they ship to UK just takes 7-10 days for the mold,however for the pigment and resin will take 12-16 days.
@WoodenItBeNice
@WoodenItBeNice 4 года назад
@@MoonpieCreations Thanks Ken
@athenatralenberg6604
@athenatralenberg6604 3 года назад
use an ultrasonic jewelry cleaner machine to get rid of bubbles. When they come to the surface I torch them. This way you eliminate a ton of bubles and micro bubbles I also pop any pesky bibbles in the mold with a torch. You have to be quick with the torch, don't hold it in one place
@MoonpieCreations
@MoonpieCreations 3 года назад
Hey those are great tips. Thank you.
@nodditiesoddities
@nodditiesoddities 3 года назад
Could you use a vibrating foot mat by chance? Or does it have to be the jewelry one?
@athenatralenberg6604
@athenatralenberg6604 3 года назад
I haven't tried that. But if you do because your resin is secure. It could be a real mess if it spilled
@Fa5npretty
@Fa5npretty 3 года назад
Hey do you guys take requests to make molds?
@MoonpieCreations
@MoonpieCreations 3 года назад
If you head down the the website in the description for Let's Resin, they may be able to help you.
@babysaho9576
@babysaho9576 3 года назад
Soap water helps to get the objects out of the molds easily
@MoonpieCreations
@MoonpieCreations 3 года назад
Good tip.
@babysaho9576
@babysaho9576 3 года назад
@@MoonpieCreations thanks
@pollyrobinson3877
@pollyrobinson3877 4 года назад
Awesome, thanks. And it’s pronounced “mala-kite.” :)
@MoonpieCreations
@MoonpieCreations 4 года назад
Thanks Polly, we had a fun time mispronouncing it. lol. Ken
@pollyrobinson3877
@pollyrobinson3877 4 года назад
Moonpie Creations oops, sorry!
@eiPderF
@eiPderF 4 года назад
I came to see if anyone had posted this. Mal-uh-chitty was pretty amusing.
@MoonpieCreations
@MoonpieCreations 4 года назад
Polly no need to apologize.
@bigraymie
@bigraymie 4 года назад
Sweet Ken B-)
@MoonpieCreations
@MoonpieCreations 4 года назад
Dude this was super fun and addictive. Time to get my granddaughter hooked. lol Ken
@bigraymie
@bigraymie 4 года назад
@@MoonpieCreations You have a Granddaughter Ken ? How awesome for you my friend... I have one of each.. (Granddaughter & A Grandson) My stepsons kids both in their 20's now, Hell I'm still their "Granpaw" whichever way you look at it B-) Raymond
@MoonpieCreations
@MoonpieCreations 4 года назад
I have four grand kids. Two boys and two girls. So awesome. I like them better than the my kids. Ken
@bigraymie
@bigraymie 4 года назад
@@MoonpieCreations Mines are great coz they go home after visits... Ha ha ha, You take care my friend I'll catch laters B-) Raymond
@annheard8280
@annheard8280 3 года назад
You made me laugh out loud.
@MoonpieCreations
@MoonpieCreations 3 года назад
😃
@pamelamckissic4406
@pamelamckissic4406 4 года назад
Soapy water will help to get it out of the mold. Hth
@MoonpieCreations
@MoonpieCreations 4 года назад
I tried that and unfortunately it did not work. I eventually tore the mold so I ordered another one. I will use mold release this time. Ken
@sailenbarik8308
@sailenbarik8308 Год назад
Malachite is pronounced as Mal-a-kite!! Basically the 'chite' part rhymes with 'kite' (the paper things that fly). Good video.
@MoonpieCreations
@MoonpieCreations Год назад
Thank you.
@marandacarver9500
@marandacarver9500 4 года назад
Please use a mask , inhaling resin fumes can cause lots of problems including chemical ammonia!!
@MoonpieCreations
@MoonpieCreations 4 года назад
Thanks for the concern. We appreciate it. Thanks.
@dianep3071
@dianep3071 3 года назад
Where you respirators
@MoonpieCreations
@MoonpieCreations 3 года назад
I have no need for one when casting. TB doesn’t have noxious odors
@dianep3071
@dianep3071 3 года назад
@@MoonpieCreations It’s a chemical. Oders or not. It can still get in your body. Even if it t says not toxic. It still is.
@MoonpieCreations
@MoonpieCreations 3 года назад
@@dianep3071 Thanks for worrying about us but I think we’re OK
@octobermourn
@octobermourn 4 года назад
That last coaster one was pretty’s it looked like a sky coaster
@MoonpieCreations
@MoonpieCreations 4 года назад
Thank you Sherry. This is super fun.... Ken
@rechellethackray
@rechellethackray 2 года назад
Can I ask how Let's Resin asked you to do a test kit? I have so many creative ideas I'd love to try, if only they would send me a kit.
@MoonpieCreations
@MoonpieCreations 2 года назад
They reached out to me. They like to use what they call influencers with RU-vid Channels and Instagram channels. Feel free to shoot me an email and I will give you my handlers email. moonpiecreations2014@gmail.com
@john6203
@john6203 2 года назад
Loved the video. Also as aside I must thank you as I just discovered Luke Combs which is thanks to you.😎
@MoonpieCreations
@MoonpieCreations 2 года назад
Awesome! Thank you! and You are welcome
@Kree8tif
@Kree8tif 4 года назад
Thanks for the demonstration! I know it's an unusual word, but malachite is pronounced MalaKITE.
@MoonpieCreations
@MoonpieCreations 4 года назад
hahahaha, thanks we were laughing so hard at each other for our pronunciation. Ken
@Kree8tif
@Kree8tif 4 года назад
@@MoonpieCreations I'm glad you didn't take my comment as an insult. I love your videos and have my husband watching them now too! I'm hoping I can catch one of your resin bowls on Etsy one day before they are gone! In my eyes, that would be a family heirloom. I will be giving the resin kit that you demonstrated a go too! I discovered looking at their site that you can make earrings out of the resin also. :-)
@MoonpieCreations
@MoonpieCreations 4 года назад
Hey Kim, that is awesome. I do not use Etsy any more. Keep an eye out for my pieces on my web page moonpiecreations.com They come up every now and then. If you want to try TotalBoat use MPC20 on their site. They sell smaller sizes than gallon also. And thank you for watching and supporting me. Ken
@Missy197666
@Missy197666 3 года назад
I have never heard anyone pronounce Malachite quite like that 😳(Mala-kite)
@MoonpieCreations
@MoonpieCreations 3 года назад
If that’s the worst thing you saw in that video I’m doing good. Welcome to the south.
@Missy197666
@Missy197666 3 года назад
@@MoonpieCreations I’ve lived in North Carolina (Army brat) and I’ve lived in Missouri and some of my family is from Kentucky so I’ve heard quite a few things pronounced interestingly but your malachite was a new one on me and it made me chuckle 😊 and I even shared it with my mom and it made her smile so thank you for that. This is my first time watching one of your videos and I have to say that of all the videos that I’ve watched (and I’ve watched a lot!) yours was one of the (very,very) few that was helpful, I’m new to resin making and I ordered a jewelry dish mold and it has 2 pieces and it came with no directions of course but after watching your video I think I can “wing it” 🤞 so again thank you 🙏
@nicolemcmillan5095
@nicolemcmillan5095 3 года назад
You should show the other way to user alcohol ink. It looks much prettier than using it to mix in the resin.
@nicolemcmillan5095
@nicolemcmillan5095 3 года назад
Use- not user...
@TheGrantAlexander
@TheGrantAlexander 4 года назад
Very nice intense staring!
@MoonpieCreations
@MoonpieCreations 4 года назад
Thank you, I work on it regularly. Drives her nuts lol Ken
@orelygarcia
@orelygarcia 4 года назад
💖💯😎👍👍
@MoonpieCreations
@MoonpieCreations 4 года назад
Thanks Ken
@debf5twstr2008
@debf5twstr2008 3 года назад
Mal a Kite
@MoonpieCreations
@MoonpieCreations 3 года назад
Thank you.
@yingnitsui2547
@yingnitsui2547 4 года назад
hello what's your business contact way?
@MoonpieCreations
@MoonpieCreations 4 года назад
my website is moonpiecreations.com Email moonpiecreations2014@gmail.com The Let's Resin website is Letsresin.com
@blue_moon6490
@blue_moon6490 2 года назад
Those are resin inks, not alcohol inks. 😁
@MoonpieCreations
@MoonpieCreations 2 года назад
They say alcohol ink right on them.
@blue_moon6490
@blue_moon6490 2 года назад
@@MoonpieCreations, oh, mine say resin inks. Sorry.
@MoonpieCreations
@MoonpieCreations 2 года назад
@@blue_moon6490 these say Resin also, under it it says Alcohol Ink. No issues.
@lyndaowen2154
@lyndaowen2154 2 года назад
I just realize this video is two years old so you probably already know everything I just got through saying.
@ojejewels3495
@ojejewels3495 4 года назад
Where is your safety equipment? Using glove only will not protect your lungs. Very best!
@MoonpieCreations
@MoonpieCreations 4 года назад
Although I appreciate your concern. There are no fumes coming off this resin for me to be concerned about. Unlike a lot of other resins and I have used many different resins, some of of which put off a very high chemical odor, TotalBoat 3:1 does not. I'm not telling you or anyone else not to use a respirator, I'm saying I have no concerns of fumes from the 3:1 TotalBoat. When I turn it on my lathe is a different story. Ken
@melimel9265
@melimel9265 4 года назад
u got it just in time as they are based in CHINA. lol
@MoonpieCreations
@MoonpieCreations 4 года назад
I hope they are all doing well. Ken
Далее
I Cast Metal Shavings and This Happened!
9:12
Просмотров 3,4 тыс.
This is The Most Incredible Table Design Yet
26:42
Просмотров 6 тыс.
Кто быстрее? (GTARP)
19:19
Просмотров 423 тыс.
ПОЮ НАРОДНЫЕ ПЕСНИ🪗
3:19:41
Просмотров 1,9 млн
This is so simple you HAVE TO try it!
18:16
Просмотров 72 тыс.
Tinting Resin - What Works and What To Avoid
9:18
Просмотров 184 тыс.
This Peacock Bowl was Amazing Until it Wasn't
12:15
Просмотров 4 тыс.
Woodturning - Center 🌎 Earth
20:48
Просмотров 155 тыс.
This Bowl is a Purple Masterpiece
9:54
Просмотров 3,3 тыс.
This New Mold Should Become A Best Seller
8:02
Просмотров 17 тыс.
How to Take Care of Your Silicone Molds
16:24
Просмотров 92 тыс.
Alcohol Ink Drips into Deep Resin Molds  | 454
25:58
Просмотров 35 тыс.
What it feels like cleaning up after a toddler.
0:40
CAA Conversion kit at ZAHAL 🎯
0:14
Просмотров 16 млн
Double Stacked Pizza @Lionfield @ChefRush
0:33
Просмотров 57 млн