LEVEL DONE! 2022 AT4X, looks Wicked!! :) 

Yes they are! Should be done by the shop doing the level as most people don't even know that it needs done

The link is actually in the description for the antenna

@@WICKEDAUTO1 Thanks, my apologies. Should’ve thought to look there. How’s your real world experience with it?

@@dopeboyp3487 honestly can’t say too much reception wise. I mostly stick with Sirius or my own music but durability wise it’s amazing! Had it on the F150 and now this one so over 4 years total between the two and I will buy it again for the next vehicle

@@WICKEDAUTO1 I appreciate the feedback. Stay safe and enjoy your Sierra. Lord knows I’m enjoying mine.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KbA4s7vkxgE.htmlsi=QhA8hgcZTX8Y36Hl

The RC 3.5in ones. Perfect fit, plenty of room, and extremely beefy especially compared to stock

@@WICKEDAUTO1 nice. Does this give more clearance when running a bigger tire or what are the advantages of also changing it when doing the leveling kit?

@rubencastano6771 the angle from factory is already rough, plus how small they are. When leveling/adding bigger tires your making the angle worse so you need upper control arms for that height to correct the upper ball joint angle. If not, its possible for the ball joint to break at any time

@@WICKEDAUTO1 I see. Thank you Did you get your alignment checked after install? Also, with the 35s you are running, do you see your speedometer off? Have you seen any noticeable decrease in your MPGs?

@rubencastano6771 an alignment should absolutely be done. Yes the speedometer and miles/mileage are off. Most GMC dealers can't correct as GMC sends them the code, which they won't do for non factory sizes. So have to wait for pulsar lt to be available for the refresh to change yourself which will cost about $500

Top of the wheels not sure, if I remember correctly it was about 40” to the fender though

First off the stock control arms are terrible. 2nd once you add a 2 inch level to an AT4 which already has a 2inch lift from factory the stock control arms have too much pressure on them and break. With the aftermarket ones the angles are level and much safer

The person above is correct, I also stated in the video...why u watch the whole thing lol you don't want to go over 3-3.5in of lift with stock control arms due to the angle. At4 is already lifted 2 and RC Level is the smallest at 1.5 so you are at the limit. It can actually fail due to the angle and your tire will no longer be held up at the top. Google/youtube upper control arm fails

@@Michael_Puddephatt Thanks so much for the reply. I have a AT4X, hoping to level it but only if it’s done right. Unfortunately I don’t know anything about how it works. Thx

@@WICKEDAUTO1 Thanks so much for the reply! Some of the stuff in your video went over my head, just wanted to confirm so I do it right. Thx again.

Truck looks awesome! What brand are those window wind deflectors?

I will say it’s too dark at night in the country lol but 35 on the windshield which is fine but the 5 on the sides is bad. Have to put my window down to see in a parking lot or something similar

Fuel contras, 18x9 +1 or 0 can't rem which on the offset lol tires are nitto ridge grapplers 285/75/18...per nitto actual size is 35.08x11.26

It actually did. Barely but it does still fit!

Absolutely will. Gona pull it in tomorrow and find out 🤞

So it does fit, barely but it does lol

Nice, good to know. Mine is still on stocks 265/60/20s which are 32.5" and food on my 7' garage.

Have not had to put it in 4wd so far.

There’s a ton of information on Facebook pages for them all to give you a pretty good idea. If you want to, measure the distance between your tire and closest point of the truck (fender, mudflap, bumper). Double that measurement, add that to the current size and that is how much bigger you can go without trimming.

It is a good idea yes, however I will say many have had some issues with different UCAs being too big and rubbing the tire on stock wheels

what is a uca

@@swgniezz1051 upper control arm

Nope, has 2in of rake

RC 1.5 for the at4x and got their 3.5in UCAs. Haven't had to use it but not supposed to change it at all

@WICKEDAUTO I want to level my ZR2 but I don't know if it will mess with the 4x4 and the different settings. And I cant find anything or anyone that has tested it yet. If you do, would you make an update video?

@kuyaali956 yep, absolutely will. Only thing I've seen is with the BDS 2in they say not to use 4wd auto but 4hi n 4lo still work as they are supposed to.

@WICKEDAUTO awesome, I'll be on the lookout for the update. Rig looks good.

It could void the warranty for suspension related parts but depends on the dealership

Yep