Level Up from Basic - Harbor Freight Press Mods with SendCutSend & Swag Offroad

Подписаться 14 тыс.

Просмотров 89 тыс.

50% 1

To improve the strength of my Harbor Freight 20 ton press, I had ‪@sendcutsend‬ laser and dimple some boxing plates, built up a ‪@Swagoffroad‬ heavy duty finger press brake kit, and tarted it all up with some super nice paint from ‪@seymourpaint_official‬. It's a huge upgrade, and looks pretty sharp, too.
Save 15% with this link at @SendCutSend (dimples arrive early in 2024):
sendcutsend.com/maker-willome...
MRO Paint from Seymour - the closest thing to powder coat in an aerosol can:
www.seymourpaint.com/product/...
If you'd like to support the channel, please spread the word and check out my website for latest shirt, hat, hoodie and sticker designs.
www.willometmotorandfab.com/
AFFILIATE LINKS!:
Save 15% with this link at @SendCutSend:
sendcutsend.com/maker-willome...
Free Shipping over $50 at Seymour Paint:
Seymour Paint: www.seymourpaint.com?ref=1759
Super handy tools I found on Amazon:
www.amazon.com/shop/willomet_...
Miller Welders: www.millerwelds.com/equipment...
Offroad Design: www.offroaddesign.com/willome...
Got a sticker you want to see on the channel? Send it to me, here:
Willomet Motor & Fabrication
Sticker Adoption Drive
1321 Upland Dr
PMB 19420
Houston, TX 77043, US
THE SOCIALS!
Instagram: / willomet_motor_and_fab
Facebook: / willomet
The legal stuff:
This description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
This video is for entertainment purposes only. Willomet Motor & Fabrication, LLC makes no warranties as to the fitness for purpose or use of any of the tools and techniques depicted and assumes no liability or responsibility for property damage or bodily injury incurred from viewers attempting to use any information contained in this video. Use this information at your own risk.
00:00 Hey Y'all
00:36 Fixing the welds on the harbor freight press
01:42 SendCutSend dimpled reinforcement plates
04:54 Miller Multimatic MIG settings
06:00 The cheapest way to add strength to the harbor freight press
07:28 SWAG Offroad 20 TON Finger Brake Heavy Duty DIY Builder Kit
10:03 MIG welding vs TIG welding, which is better?
10:48 Final assembly and of the SWAG Offroad Press Brake
12:00 First Impressions of the SWAG Offroad Press Brake
13:07 This is probably my favorite paint for tools

Авто/Мото

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 160

@Marcus_Woodard 5 месяцев назад

That came out great! I’ve switched over to Seymour and I’m loving their paint as well. You are going to love the water cooler. I thought I’ve seen you use one before. Either way, you have to teach yourself to take breaks. And don’t forget to turn the cooler back on when you start welding again. Ask me how I know.

@WillometMotorFab 5 месяцев назад

Yeah, I used to run a cooler on the old everlast, but the miller still needs that upgrade. Can’t wait to go back to the 20 torch life. Seymour is tops. Just wait until you see the stainless black!

@seymourpaint_official 5 месяцев назад

Glad you’ve made the switch!

@charlesrock7770 4 месяца назад

Torch life is about 15 seconds with no water flowing 😂

@brandonboulton2776 4 месяца назад

The paint is what holds a harbor freight press together.

@WillometMotorFab 4 месяца назад

Haha! I think you’re right.

@Christopherbever 3 месяца назад

So true

@independentcontractor1633 5 месяцев назад

Awesome Dave. Thanks for the share on the SCS dimple die plates.

@WillometMotorFab 5 месяцев назад

I love that we don’t have to buy every die! Thanks for being here.

@trichar2 4 месяца назад

I appreciate the safety plugs, especially the respirator, of which I need constant reminding.

@alpinefab 5 месяцев назад

Turned out great! I just picked up the smaller 12 ton version with a small press brake kit. It’s really opened up a lot of opportunity for fabrication! Great idea on these mods, I’ve already noticed the frame flexing so it may be time to get this done as well

@WillometMotorFab 5 месяцев назад

I think my 20 ton frame is actually bent a little bit. Do that topper brace!

@chrisgenovese8188 4 месяца назад

theres a special place in my heart for modifying and customizing tools. this project turned out awesome!

@joehuerta6985 4 месяца назад

Thanks for the inspiration. Never thought I would need one but I guess I will be getting one thanks 😊

@WillometMotorFab 4 месяца назад

If you’re getting a new press, you can probably skip the side plates for reinforcement. These older ones use formed plate rather than structural C.

@immanutt4442 4 месяца назад

Sir ... one of the better upgrade tutorials that i have seen ... thanks a mint for sharing !!!

@WillometMotorFab 4 месяца назад

Glad you liked it!

@branchandfoundry560 5 месяцев назад

You'll love having this machine! I scratch built a 49" wide 40 ton finger press brake last year. It'll bend up to 3/8" plate full width and 1/2" plate 20" wide is no problem. Start making different radius dies & positive/negative bucks and the sky is the limit! You can make rocker panels, door sills, B-pillars, etc. in a jiffy. Air over hydraulic is better than hand pumping, but full hydraulic is the way to go. That's my next upgrade, anyway. Not a machine I use everyday, but there's no substitute and it totally upped my capabilities to produce "Factory" looking pieces.

@WillometMotorFab 5 месяцев назад

Thanks so much for that peek ahead. I’ve got a lot of practice ahead to get the full use of this tool.

@heyallenify 5 месяцев назад

I just picked up a 20T air/hydraulic cylinder when they purged the old line of them, and will definitely be reinforcing the top gantry before installing it on my press. Having a Swag bending brake has been a wonderful addition to this press for years.

@WillometMotorFab 5 месяцев назад

You’ll love the air/hyd ram. Glad to hear the swag brake works so well, and I’m excited to really get to know the tool well.

@MrTapanes 5 месяцев назад

Great mod andn explanation of its limitations. I am definitely going to do that top brace before I start boxing in the rest of it. I would love to see some kind of pulley/wire/thing mod to raise and lower the bed frame. That's the biggest PITA for me when changing between projects. Love the content, going to deep dive your previous vids.

@WillometMotorFab 5 месяцев назад

That would be really helpful, for sure. I think even the 40 and 50 ton versions lack a pulley system, and those are a pain for sure. Thanks for being here, and I’m glad you enjoyed the video.

@timothymilam732 5 месяцев назад

Personally i rather enjoyed the blues, and I hsd no trouble understanding anything you said, but then I'm watching on a new Sony, and listening through Yamaha surround sound.. So most definitely a big difference between even a good phone, and what I'm using Not capping on anyone by any means, merely saying the devices one is has available makes the difference. Just as turning the press capabilities up several notches improved the end product, and in the long run, will save you many frustrated headaches, and reworking the different things you are making. Sorry bout the novel, but it is what it is, and at my age it's not likely to change. BTW, here comes the dam cold again, it once wasn't a problem, but age an Uncle Arthur changes things I've learned. Take care, and you're building up a good bit of equipment, and that just makes life easier to do the things you want to do. Always been a tool lover myself, only thing is soon you find yourself outta usable space again. Take care stay warm

@WillometMotorFab 5 месяцев назад

Glad you dig the music. It’s all inspired by the hotrod red coat of paint!

@ethantroy311 4 месяца назад

I love your fixture table.

@WillometMotorFab 4 месяца назад

🤟 It transformed the way I build, and my quality.

@Masterplan15 5 месяцев назад

Nice job! Hello from Denton (TX of course)!

@WillometMotorFab 5 месяцев назад

Howdy! Hey there, Mean Green!

@whitey7388 5 месяцев назад

I love my swag kit. I have the smaller one but it works so good

@WillometMotorFab 5 месяцев назад

I can totally see how it will change the game here in the shop. What kind of work and material to you primarily use it for?

@justinvanburen8259 4 месяца назад

Great video!! Thanks

@WillometMotorFab 4 месяца назад

Glad you enjoyed it!

@georgedennison3338 5 месяцев назад

I have one of these presses, as well. I picked up enough steel last fall that I can turn it into a 48" wide throsted press. 20 ton is enough smash for me. The 2nd step will be machining & fab a finger press attachment for it. In the process of widening it, I'm also going to stabilize the press beam w/ some wheels & bearings, so I can pull off some moderate duty press punch manuevers.

@WillometMotorFab 5 месяцев назад

Dude, tag me on social as you build that bad boy! So cool.

@billybike57 5 месяцев назад

Great idea, I have purchased a couple of items from SWAG, great stuff.

@WillometMotorFab 5 месяцев назад

Solid gear. I love how they solve real world problems.

@sneakyhippo8663 4 месяца назад

I used to run a 500T and 600T break press. After watching it bend 110k steel at 3/8 inch thick like butter is totally satisfying. Those pieces were used for the assembly of pintle hooks for semi trailers. Ever since I’ve wanted a cheap little press so I could do metal fabrication at home. Thank you for making this video as you’ve gotten my hopes up. Sure, this isn’t going to bend that kind or thick of steel but the bending of metal for car projects is what I need.

@WillometMotorFab 4 месяца назад

Yeah, it’s clear how this can be a sweet little piece of gear, but definitely has its limitations.

@tbroekemeier 4 месяца назад

Max width for 3/8" plate on this press is 11". It's a slow bend at that width but the brake and HF press will do it! Nothing like what you use to run but pretty dang impressive for about $650 all in without these custom mods. $600 if you can score a Harbor Freight 20% off coupon. It's a great investment for your shop, I've made all kinds of cool stuff with a similar setup. My favorite was a custom transmission tunnel for my Toyota rock crawler. I did a drivetrain lift so that it had a completely flat belly from frame rail to frame rail all the way between the front shackles and rear spring hangers. My press brake bent all the 1/8" reinforcement strips and the sheet metal tunnel itself. Made it in sections so it's all removable and serviceable and the best part was the top two bell housing bolts were a breeze to get to now! I made the entire rear section of the tunnel out of 1/8" plate as it's right where the driveshaft CV joint is. Figured make it like an NHRA drag car hoop so if the driveshaft ever lets go, it is contained and no threat to occupants. Long story short, if you're wanting to up your car fabrication game, this is a very wise investment!

@sneakyhippo8663 4 месяца назад

@@tbroekemeier thank you for that info! I have a 1990 Miata that I’m lining up an engine swap and rather fab my own parts when and where I can. This will help and same with the info you gave me. It’s much appreciated!

@Shed.therapy 4 месяца назад

Just subscribed!! Great video! I’ve also got the Swag Off-road Brake for my press. I’ve made some awesome parts for the Ranger with it. Seeing the dimple plates for extra structure on the press it self is genius. Definitely will be doing that modification once I get settled in my new garage up here in Montana.

@WillometMotorFab 4 месяца назад

Thanks for the sub! A working garage in Montana sounds pretty darned fine to me.

@Shed.therapy 4 месяца назад

@@WillometMotorFab it’s just a small 2 car garage that’s not insulated yet 🤣. So it’s limited work depending on the temperatures. But I’m ready to get back to fabricating stuff for my Ranger.

@WillometMotorFab 4 месяца назад

Tag me on social as you make progress. Big ideas come out of small shops.

@Shed.therapy 4 месяца назад

@@WillometMotorFab yeah man absolutely! I’ll be sure to tag you. I’ve been really trying to get going on RU-vid also.

@richardmccann4815 5 месяцев назад

You could use a torch to get the paint from the corners,before you apply the stripper.

@WillometMotorFab 5 месяцев назад

Totally. Great idea.

@michaelfarino9048 5 месяцев назад

Great!

@WillometMotorFab 5 месяцев назад

Thanks!

@mrmotofy 4 месяца назад

Try a needle scaler for corners...they work amazing. You'll wonder how you ever got by without it

@WillometMotorFab 4 месяца назад

Solid tip. I never think of them outside structural work, but really should.

@kurt6840 4 месяца назад

Their paint may be thick by the welds on the Harbor Freight backhoe that I bought were cracking down the middle of the welds on some of the joints and the thick paint was filling/leveling some of the undercuts on the welds which made the welds look decent.

@saturnmedia1 4 месяца назад

Awesome video! Great info and knowledge, I think there may be something wrong with the audio balance, your speech is only in the left ear sometimes when you're speaking to the camera. Keep up the videos though! you have a new sub here.

@WillometMotorFab 4 месяца назад

Thanks for those notes, and welcome. I’m glad you’re here.

@anthonyelyas2040 4 месяца назад

I just found this channel, and I love the content as well as the production. I have the same press! After seeing this video, it just seems ghetto, lol.

@WillometMotorFab 4 месяца назад

Glad you’re here!

@cbmech2563 5 месяцев назад

I'd use 1/8th 7018. Definitely my preference for structural.

@WillometMotorFab 4 месяца назад

I wish I had thought to use the stick function on the Multimatic.

@ronwalsh 5 месяцев назад

Great video. My press has seen better days itself. Any chance you would be willing to share the files on the plates to get a set of my own from SCS.

@WillometMotorFab 5 месяцев назад

I’d happily share the DXF, but you should triple verify it would fit your press. There’s a bunch of variation within and across makes.

@billwinter9206 5 месяцев назад

Video on air cylinder install?

@WillometMotorFab 5 месяцев назад

I did that before I started making videos, but I’ll make sure to recap in a future one. It’s just a simple parts swap - no mods needed. Get the air/hydraulic 20 ton from HF or wherever, and you’re done.

@woodrowbrimm2805 4 месяца назад

I think you just voided your 90 day warranty.

@WillometMotorFab 4 месяца назад

Haha! Was it the paint? I bet it was the paint.

@russwilliams4777 4 месяца назад

4:48 Dimpleception! 🤣

@WillometMotorFab 4 месяца назад

Haha! Thats a new hashtag.

@user-kh2yl6nn3l 5 месяцев назад

The newer 20 ton press is far better than the ancient models . It seems that throwing big money at the old design is silly when you could have spent the same money at the new design . Besides, Swag makes a ton of add ons to the new press you can either buy or copy yourself if you want to fab them up yourself .

@WillometMotorFab 5 месяцев назад

I saw your second comment, and only want to kindly disagree that it’s silly to work with what you have, even if a newer model is superior and it might barely cost more that this labor plus some fancy plates. Like I said in the video, you can box in using plain materials, which I’ll admit the dimples are way extra. I got this second hand, and there’s value in making what you have work. There are a lot of these ancient (perfect adjective, by the way) ones out there that could still be useful. Also, the new ones still flex, but less so. I wouldn’t recommend the side plates, but would still do a topper and probably box the horizontal beams. Seriously, thank you for your comment. The make vs buy discussion is a good one to have.

@user-kh2yl6nn3l 5 месяцев назад

Actually, my first post was in ignorance, while my second post was more in commending what you have done with the little press . :) It's a beautiful little beast . lol And yeah, it sure is worth the effort to make a master piece out of seemingly junk . I think I was in the same mind on my second post after I watched the whole video . And I forgot to sub last time, I won't forget now . :)@@WillometMotorFab

@WillometMotorFab 5 месяцев назад

I'm glad you're here, and thanks very much for the support!@@user-kh2yl6nn3l

@gangstabunny4lyfe 4 месяца назад

Use air plain stripper it goes to the metal

@bigrednick100 4 месяца назад

What would be really cool is if he posted the fusion files to send to send cut Send.

@WillometMotorFab 4 месяца назад

I didn’t make these in fusion. I’ll gladly share the DXF if you want.

@bigrednick100 4 месяца назад

@@WillometMotorFab that would be pretty cool.

@andrewruns Месяц назад

Yar, would you share those DXF files? That would be sick.

@BenNawrath 5 месяцев назад

Tougher than woodpecker lips! 😂

@WillometMotorFab 5 месяцев назад

That’s at the top of the toughmeter!

@CALDues 5 месяцев назад

Dang, this guy beat me to this exact comment!! 😂 Sincerely, First Loser

@Youtubecensoredmyusername 4 месяца назад

Lol I got a harbor freight shop press out of the trash. After using it. I threw it right back in the trash where it belonged

@TBJK07Jeep 4 месяца назад

I’ve found brake cleaner takes the harbor freight paint off. I dont recall if it were chlorinated (bad for welding) or non-chlorinated.

@WillometMotorFab 4 месяца назад

Good tip. I’ll try that on the next one of these types of projects.

@mavigogun 4 месяца назад

Speaking to that "paint harder than woodpecker lips": brushed and ground in your shop without a respirator, whatever is in that paint is now part of you and your working environment. Without basic precautions, these needs-of-the-moment impose long term liabilities.

@WillometMotorFab 4 месяца назад

There are a few moments I missed wearing my respirator - a quick grind here or there - but that’s not okay long term. The obvious ones, like every time I weld or strip paint or grind for long periods, are easy, so I appreciate you reminding me about the smaller moments that can add up over time.

@mavigogun 4 месяца назад

@@WillometMotorFab My comment is as much a reminder to myself, unsatisfied with choices I've made. While I've masked up for recent sanding and stripping, not so with stick welding, with all the noxious gas that produces. What are you wearing/what filter are you using for welding? I need to equip myself.

@WillometMotorFab 4 месяца назад

I use a 3M 7000 series mask, and P100 filters with activated charcoal. The charcoal is optional, but helps with the stinky. Definitely mask up when you're burning that flux.

@user-kh2yl6nn3l 5 месяцев назад

I didn't watch the video completebefore the first post, so I'm stepping on my tongue a little . lol

@WillometMotorFab 5 месяцев назад

The SWAG stuff is top notch for sure. I saw the new ones are mostly C channel, which is a huge step up from formed plate. I would definitely still do a topper on that frame since C channel still flexes a fair bit.

@datsun4x 5 месяцев назад

Serious question, when welding something dirty, why not arc with some 7018 or 6010?

@WillometMotorFab 5 месяцев назад

I absolutely could have stick welded this, but I'm better practiced at MIG. I haven't stick welded in many years, but 6011 and 7018 were my go-to rods when I did. Now that you mention it, I kind of want to do it all again with some good rods.

@raulbetancourt5009 5 месяцев назад

By chance is there a way to get the dxf files for getting those reinforcement plates? I think its very cool.

@WillometMotorFab 4 месяца назад

I will gladly share them. Just make sure the measurements will suit whatever version of the press you might have.

@raulbetancourt5009 4 месяца назад

@@WillometMotorFab Thank you! Is there a place I can download from? Or should I private message you? I went ahead and messaged you on Instagram 😀

@vanblindguy4600 4 месяца назад

Might want to check your mic 75% of vocals only coming through the left channel

@finchadaptivefabrication4689 5 месяцев назад

Where did you get the sander attached to your drill. I do a lot of work with Aluminum and that would be awesome to have

@WillometMotorFab 5 месяцев назад

The drum sander is the SCT tool from Eastwood, and the wire brush was just an Amazon attachment. Does that help?

@coryb6730 4 месяца назад

Maybe he was taking about the tubing sander

@WillometMotorFab 4 месяца назад

You’re absolutely right! Thats a 525 tubing sander. It’s handy, but a bit expensive.

@19672701 5 месяцев назад

so are you offering the reinforcement kit? or selling a dxf for sendcut send?

@WillometMotorFab 5 месяцев назад

There’s so much variation across harbor freights own press line - the current ones are different from mine - that it’s hard to make a kit and guarantee the fit. I would suggest taking dimensions off your press, and using SendCutSend’s parts builder to make a set of plates for exactly your setup.

@roy.h.barrett 4 месяца назад

Thought theusic was very NOT Bad. Certainly far worse choices out there. All in all, good content and Happy New Year to you as well!

@WillometMotorFab 4 месяца назад

I'm glad you appreciated the music. I actually have a fun time choosing it, and yeah, there are a lot of stinkers out there.

@mrmotofy 4 месяца назад

Someone should chip some paint and do a lead test on it. Wonder if they're still using lead paint in China

@WillometMotorFab 4 месяца назад

Dude, I totally think the paint is worse than what we use here, but I’d be surprised if there’s lead. It’s not so old that it escapes a bunch of import rules forbidding lead in paint. Still, wear a respirator.

@mrmotofy 4 месяца назад

@@WillometMotorFab I can think of 50 different products imported that are illegal. They'll just mark a different box or change a description or lie. Ebay just got ordered to pay 2 Billion fine for their role in selling/suggesting illegal diesel truck mods/products. A lot of it was I ported from uh "foreign sellers"

@dandahermitseals5582 5 месяцев назад

You new gen people. Haha. Im 80 and if you want to strip that paint and just rinse it off. You need lye. Just buy a can of Easy off brand oven cleaner.. Spray it on and let it work then just rinse and wipe off.😅😅

@WillometMotorFab 5 месяцев назад

I’ve learned plenty from my elders, so your shake and bake tip is added to the list. 🤝

@737mechanic 4 месяца назад

The paint is powder coating.

@WillometMotorFab 4 месяца назад

I was totally thrown, because it’s the thinnest powder I’ve ever seen. I’m sure you’re right, but sure didn’t register with me.

@joell439 5 месяцев назад

👍😎👍

@WillometMotorFab 5 месяцев назад

🙌🙌🙌

@ODGColornChrome 4 месяца назад

It isn't paint, it's powder coating.

@WillometMotorFab 4 месяца назад

I’m sure you’re right, and I’m just thrown off because I’m used to powder being much thicker.

@phillipcoiner4232 5 месяцев назад

I don't understand adding the dimpled stock. Looks like you just made a dirt catcher that is nearly impossible to clean out.

@WillometMotorFab 5 месяцев назад

The plates box in an open C shape and make it stronger. Dimples add strength so we can use thinner material that's similar in strength to a thicker non-dimpled material. It might gather some dust inside the holes, but that's worth it (to me) to be able to have a press frame that doesn't bend. These HF presses are pretty flexy out of the box.

@fredbecker607 5 месяцев назад

It looks like it might be quicker to build from scratch.

@WillometMotorFab 5 месяцев назад

For stuff over 20 tons, I kind of agree. This is definitely targeted at folks that are sort of stuck with a flexy tool from HF and want to improve what they have. The frame mods and press build each took a day, and that includes me filming it.

@research903 5 месяцев назад

Other than the background music being far too loud (it drowns out your voice), great video.

@WillometMotorFab 5 месяцев назад

Thanks for that note. The edit software automatically raises and lowers the audio when there’s dialogue. Some other folks had similar difficulty, and I plan to adjust the db separation so it’s easier to hear the dialogue clearly.

@Z-Ack 5 месяцев назад

Just adjust its volume down a little overall..

@Fkyourfeelgoods 4 месяца назад

Why wear a respirator every time?

@WillometMotorFab 4 месяца назад

Short answer is to keep your lungs free of toxic stuff. MIG makes a ton of smoke, anything with flux does the same, welding anything stainless puts off hexavalent chromium which will eventually turn lungs into an ingot, and so on. Live to build another day. Also, my wife likes having me around.

@joshg8458 5 месяцев назад

Not sure why you have music over your voice when your talking. Makes it hard to hear what you’re saying. Nice work, looks good. I’m still needing to grab a press.

@WillometMotorFab 5 месяцев назад

I think their new presses are entirely made from c channel, so probably tougher than my old one

@mrdddeeezzzweldor5039 5 месяцев назад

It'd be a whole lot better off for worldbeat modification to get yourself a dye grinder and some carbide bits 1:48

@WillometMotorFab 5 месяцев назад

Worldbeat?

@grippgoat 4 месяца назад

What's the point of having a press if you can't make your dimple dies? 😂

@nicolaschampagne8988 5 месяцев назад

nice work but probably not useful. the press was able to handle 20 tons and now it can handle more but the bottle jack is still 20 tons

@WillometMotorFab 5 месяцев назад

It’s kind of a capacity change, since the frame bends pretty bad well before maxing out the cylinder, so that’s helpful.

@Kyle-ev4fk 4 месяца назад

These are 10 year old mods, if you haven't heard of SWAG you must be a pilgrim.

@WillometMotorFab 4 месяца назад

Greetings, Native American.

@sherwinstaudt1881 5 месяцев назад

Woodpeckers have no lips, just like moth don't have balls, add frogs don't have false eyelashes.

@WillometMotorFab 5 месяцев назад

Those are some of my favorite measuring units!

@garybrown9719 4 месяца назад

Just torch the paint with Oxygen and acetylene

@Bob_Adkins 4 месяца назад

Wants to strengthen the press with 13ga metal, then tack welds it. I guess he didn't want it TOO strong.

@alandavis6429 4 месяца назад

First off using a MIG welder to attempt to do structural welds on material that thick is a waste of wire, it's not going to happen.

@mrmotofy 4 месяца назад

False lot's of guys have used MIG for years repairing/fabricating heavy machinery then working the equipment hard for many more years

@WillometMotorFab 4 месяца назад

Yeah. There’s a long list of code welders that mig, and do it well. Also, the frame on this junk is 3/16, so it’s not some sort of behemoth.

@alandavis6429 4 месяца назад

@@WillometMotorFab take 2 pieces of material that thickness and MIG weld them with that gas shielded weld and take the same 2 pieces and 7018 weld them then flex both. I will absolutely guarantee that the MiG weld will break on the first flex and that the 7018 will take multiple flexes. It is NOT the man, it is the machine. It makes absolutely no difference who is holding the gun, it is the gas coming out of the nozzle and the process. You have NO penetration control with shortcircuit transfer.

@WillometMotorFab 4 месяца назад

I disagree with nothing you said, but recall your original comment. This is just a cheap press with 3/16 material that isn’t hard to penetrate at all. As long as the welder is big enough, regular old MIG is fine for this. Now, stick welding it would have been cool, too.

@mrmotofy 4 месяца назад

@@alandavis6429 You may think that but doesn't mean you're right. Maybe your skills are limited but doesn't others are

@paulmorrow5905 5 месяцев назад

the music ruins a good video. to bad it started out interesting

@sheanyquist 5 месяцев назад

Cant please them all. I dont think it hurt the video

@michael-michaelmotorcycle 5 месяцев назад

Your comment ruins a good comment section.

@JackSmith-jj3bi 5 месяцев назад

I have to agree. I muted the sound, so I missed some really good information from you.

@Factory400 5 месяцев назад

The music is fine....helps keeps interest the whole time.

@White.Elemant 5 месяцев назад

@@michael-michaelmotorcycle 😂 I kinda side with you. Not my style of music in any way, but: at least it's not the same riffraff you hear on every other channel. Imo nothing to bitch about.