On your running end, approx 20" from the hook, there is a loop already stitched in the strap. You are supposed to go around the pipe and then hook into that loop so it doesn't keep falling off. In your instance, you could go around the center pipe and then hook onto the one next to it so the hook cannot fall down. For all of us that have straps without that loop, this is a great tip to make life easier. Especially if you are strapping down an ATV etc. Any movement of it could allow the hook to come loose. That is why you can now spend a little more $$ and buy straps with the safety catch on them so they cannot come off. Spending a few extra $$ is better than watching your ATV pass you in the ditch going end-over-end.... lol.
It's that darn one percent rule. You have to be one percent smarter than what you are trying to use. Not a lot, just one percent. Apparently some people are uncoordinated or challenged in one way or another. Maybe they forget that they have two hands available for use.
Ever since I watched this video. I got hired at my dream job. I won the lottery and Adele became my wife. This really changed my life. Thanks for making this video. I owe it all to you.
It's been 2 weeks since you posted that. Has your life changed? I'm interested primarily in positive improvements. I'll eagerly await your reply (before I finish the video). Thanks
I don't want to be sarcastic like other commenters here, but I never have needed to make a loop like that to secure a ratchet tie down, but if the need arises in the future, I can certainly use this method. Thanks for the tip. I'm sure others out there found this helpful.
Thought I knew all the helpful tips with ratchet straps, have used them for years and years personally and commercial. First time seeing this thank you. Thought this was going to be a vid about how to secure the excess strap leftover which Ive known for years and also helpful. Great video, thank you.
Always found it easier to just twist the strap one full turn then hook it on. Keep the line somewhat taught and it doesnt fall off while you get hooked on the other end.
I use the exact same straps you use there’s a loop sewn into that strap right next to the hook. All you gotta do is make a loop around and put that hook in that loop and solve the same problem. It works on both sides.
Brilliant my man! Just what I was looking for. I had an S hook come loose while transporting a dirt bike on a a hitch rack. Luckily I had a back up strap or I would have lost the bike. This technique will pretty much assure that will never happen. Thank you so much!
Ben! man your technique didn chang my life but it sure got me out of the tie down nightmare i have been FOR YEARS! i tried rubberbands, little bungy cords, tape...NOTHIN WORKED! But your technique worked grrrreat! thank you for sharing. Wish i found this method a long time ago.
Man. U know how frustrating it was to ratchet down cargo boxes to the roof rack by myself. Damn hooks. Thank u!!! Next camping trip using this idea💡 Don’t know how the heck i didn’t think of it.
Also might compromise the load rating. S hook is made to take stress inline with strap and hook. This changes the load to perpendicular sideways on the hook and gives some leverage. With a cooler worse case it bends the hook. With a heavy load it could exponentially reduce the break rating.
Now your a man who has done this before ! It’s ok for what he’s doing but it will not work for heavy duty work not to mention the strength of the tie down is only on a straight pull you reduce the load capacity with every wrap . But for a case or two of beer he should be good to go …..
Probably not as strong or as durable as directly hooking the strap but if your sick of loosing the first hook before you get to the other side of your load it’s a good hack. Most of the time my strap tying is overkill anyway. Should work fine on my smooth boat trailer eyes.
@@bensbackwoods any rubbing over time will wear through the strap once it has a small tear it can snap that much easier why they make rubber pads and even cloth pads to go on your strap or under when the strap rubs so it sliding back and forth as you turn left and right will make it wear through but ya the 100lbs cooler should not push on it to much
I doubt it....The original configuration has all the tension on the metal hook it is sewn too. The configuration I am using has the webbing wrapped around the same hook creating tension. As long as the bar it is wrapped around has no sharp edges I cant see the difference or down side...thanks
I’m not an engineer but it should be the same load limit this way verses conventional way . Load limit is based on the weakest link. Load limit I think, should not be effected if there was no hook and you used a knot that could handle the load.
This method basically creates a choker type of rigging, while helpful it also reduces the load limit of straps. For simple hold down like a cooler it is fine, but for something like that I’d just get the ratchet straps that have the latch on them and call it a day.
I have a couple of ratchet straps that I cut the 2 hooks off and put on large locking carabiners in their place. Never even thought of the loop method. The loops are certainly easier than mine
But now the tension of the load contact point is strap against the metal bar of the cargo basket, instead of the metal hook and under heavy loads that strap will tear from the sharp edge of the metal
The loop created goes around the hook...so direct tension is on the same hook, I agree do not do this on anything with sharp edges...the cargo basket does not have sharp edges. thanks!
If you don't yet have a tie down or ratchet strap, they sell them with clips that work like carabiners. That prevents them from falling off. Otherwise, good Plan B.
Drop the hook down and around your anchor point. Loop the strap through the hole of the hook. Put the hook through the loop and snug it tight. Been doing this for 40 years. Will not come off until removed, yet comes apart easily.
Just get a short piece of bicycle inner tube and make a hole on each end. Put the hook through one hole and slide it onto the shank. Attach your hook and stretch the other end of the tube over the end of the hook to capture what you're attaching to.
I have cheapie Walmart specials that don't have the daisy chain loops stitched into them. I've been using this method for years in my truck because of shifting with items that aren't rigid. That way the hooks don't come undone. In my case it's usually kayaks and rafts.
Presenting the king of over thinking. Pretty sure it would be faster every time to just use the hook as designed and hold a little tension in the strap with your free hand. Idk, its just the way i do it. Alternatively they sell these with carabiners instead of hooks which is the easiest to use
I'll bet all of these negative commentors will end up using this technique at some point. It isn't life changing by any means, unless maybe if you use straps daily, but I can see myself using it at times.
Don't pull so much slack out of strap before beginning to ratchet. You want the strap to overlap strap. If it's just on metal barrel, there is potential for it to slip. One complete wrap of strap, at least if load is important to you. Nice trick!
Or you could just use a rope like they are made for. The point of a ratchet strap is to hook onto things and pull them down. What's the point in the hook if you just decide not to use it. Ropes are definitely cheaper anyway so what's the point in the ratchet strap.
That cooler also has slots in it for the strap so it can stay tied down and you can open the cooler without undoing your strap..... Open the lid and there will be slots on either side for the strap. Now I've changed your life
You’re sideloading that hook, that is not how it was designed to be used. Consider using the little loop that was already built into that strap that you had on the wall. That’s what is there for
You need to wind several rounds of strap whenever cinching down a ratchet strap. You pulled too much slack out before ratcheting. This would prevent the ratchet tie down from slipping during traveling.
This hack changed my life soooo much. Everytime my straps would come loose, I'd get pissed, cuss & slap the wife and kids, kick the dog, and use the Lords name in vane. Now, if I could find hacks for all the other reasons I assault my loved ones. Thanks!
Hey Ben little news flash for you There is a small loop built into the strap to secure the hook into does pretty much what your trying to do minus the Tom foolery
