Nowadays fighting against corona virus with home staying , can be accepted only with your videos. Thank you Daniel you made my today morning shiny and full of dreams.
Some very good educational content there Daniel. Am just getting to grips with a C-stand that I bought some months ago. Will be buying some more stuff for my stand based off of the info learned from watching some of your videos. The junior to baby adapter looks interesting so I have added that to my shopping list.
Personal Viewer Info: Many times I have come across a situation where I hear in my head you talking of some grip (that I should have purchased when I watched the video) while I am struggling for not having that piece of equipment. The important point for me, other than my negligence, is that I recalled that you did the video (no matter how seemingly trivial) so I go back and find the video info and move on better happily from then on 😊 .
Thank you for making all these vids for us. Definitely a huge asset and happy you’ve got your own channel on top of the great vids for Adorama, always appreciate you... stay safe out there at this time.
1/4" - 20 TPI (Threads Per Inch pitch), is also the common tripod mount thread in camera bases, speedlight flash shoes; but it has a 'mate', used in MF and LF cameras, like mamiya RB67, Hasselblad, the 3/8"-16 TPI thread, and this also has reducing sleaves to go from 1/4"-20 to 3/8"-16 so ANY tripod quick release adaptor, or tripod column can fit directly onto it.
Just picked up some baby pins with a 1/4x20 at the other end.. I am finding them pretty handy with my C stands. Which I have to say, the Mathews Stands were a very wise investment to me.
Useful! Not aware of baby vs junior, I bought this special arm for my studio, that has parallelogram up-down adjustment and a counterweight. "Junior" might have been called "exotic" equally well. Totally understandable from a mechanical engineering point of view, though. That arm seems a luxury to many, but being able to adjust up-down and neither having to lock, nor having to adjust the angle of the modifier, works very fast. Your video here showed me I need a C-stand foot with just a baby diameter tube cut to about 5' length and the wobbly adapter can go to the cylinder file. Thanks!
Thanks for this video gave more insight in lighting kits, usually we don't give importance to such things and lacking such knowledge surely we stuck in situations,
Thanks Daniel. Another great gear video. These are good as they fill in knowledge gaps where I didn’t even know I had them. (And was probably afraid to ask). Have a good one. 👍🏻
thanks a lot for this, im new to this area (lights, tripods, camera, ballheads etc) so super confused and this was exactly I was searching for, It would also be a great help if you make a video showing common gear used as an aid to the main equipment like super clamp etc, what I wanna know is what are the things out there which can help hanging lights anywhere and stuff like that.
Thank you Daniel! Could you please do a video about your thoughts on how photographers can adjust themselves and their businesses with the novel coronavirus situation?
Excellent tutorial! I almost think sometimes people are afraid of C-Stands. If you have the chance to use them, going back to the cheap collapsible stands is painful
Okay, I just have to say, if that's "junior", I'd hate to meet the "adult" mount in a dark alley! Thank you so much for all that, Daniel. I was entirely unaware of the c-stand Junior mount aspect of this, and it's darn good to know.
The other size that might come up is 5/8" - 11 tpi which is the threaded attachment between most modern surveyors tripods and the transits, theodolites, laser levels, etc that mount on them. I picked up a 5/8-11 to 1/4-20 adapter plate (bonus is it's a 2 piece design the allows panning) so my big heavy safety orange and silver CST/Berger tripod doesn't sit gathering dust in the off season. My original Idea was to set it up on job sites to do time lapse recording of a timber frame raising.
I just knew that if I stuck with you long enough I would learn what/why certain pins are "Baby" pins. It makes more sense when you find out that 1-1/8" diameter pins are "Junior." Hopefully, I'll never need to know about "Senior" pins! 🤣 Thanks for a helpful video.
This is a helpful video. Thanks Daniel. I'm setting up my home studio and what I find is that my lights (All Elinchrom) don't sit square on the baby pin. The screw on the light's mounting bracket slips along the round surface of the baby pin and the light doesn't sit square on the baby pin. Is this normal or is there a solution on the pin or light bracket side? I vaguely heard you mention on another video there are brands who make Octagonal baby pins or 5/8 Pins with one flat side on the baby pin? Are they called something else? I think these would address the slipping of the light mount's screw. Thanks. Love your videos
1/4-20 and 3/8-16 are also the two sizes found on the underside of ENG Camera / Cine Camera Quick-release plates and Tripod base plates, leading to being able to use a Tripod as a lightstand in a pinch. Perhaps some info on the maximum load to use on those drop-ceiling clamps - they're great for speed lights baby Tungsten pin-spots, Dedolights and 150w HMI's,... but Redheads are waaaay beyond what's safe on them, and probably too hot that close to a ceiling anyway. The heaviest thing I'd risk from those would be an Area48 Remote Phosphor LED panel. One thing that's always a P.I.T.A., is when you're used to all the standard terms, and start a job at a place where they use in-house names and have assumed those are what everyone else calls things, and then they're looking at you like you don't know what you're doing, when they've asked for gear in non-standard terminology. Often happens when they call things by the brand name rather then the industry term.
I know you have done it before but I would love to see you and one of your models do a setup and shoot with the Hasselblad X1D Lens up to you but with Broncolor Scoro and Siros with a Para 88 and softboxs.... or even a small series.
Thanks for sharing Daniel.. Gold stuff. What a marvellous useful video. Keep up the good job! I searched for your video, because I bought a Godox SL150wii light (for a short-film, Indi Filmmaker stuff)... now on the Yoke below the light, there is a male 1/4 20 I guess. It is no way 3/8th. Now what kind of converter do I need to put it on a C-Stand? this is really frustrating thing about setup!
@@DanielNortonPhotographer gjanks so much Dany, Below the Yoke, the is a male 1/4 screw. I need a female 1/4 to male 3/8" I think. Man, why could they just make things universal? How much more weight would a 3/8" have? Thwy xould have used it overall, but we Europeans had to make our own things. Anyway, I am so thanksful for your support snd love the work you are doing. Carry on! God bless you!
I got a couple of cheap "universal" lighting tripods from China and the thread is more than a 1/4 but less than 3/8! Doesn't appear to metric either as I can't find a nut that with thread to it all the way down. Is this something more recent? something mis-manufactured? Just wondering if anyone knows why they are this odd in-between size.
