Liquidating 3 acres of scrap in 40 minutes. 

As a carpenter, i strip out kitchens and bathrooms, also windows, although it takes time, i break down the stuff into alu’ brass, copper , stainless and steel... some folk ask me why bother, well, i just like to try and do my bit, and lots of folk just dont care.... Well done for doing a good job.

That’s a whole lot of….EVERYTHING!!😮 Nice haul! 💪👍

Sounds like a free deal to me

That was a great deal for both of you and you did a great job cleaning up for him! Nice!

I was scared that you were going to just move his mess to your place but, man you put the work in and processed most all of it. Just wanted to say Good Job!!! and thanks for making the video along the way...

I can't believe you stripped that whole pile of wire without rigging up a foot feed of some kind. Kudos

You made your pay packet my man...great work...respect from rhe UK.

I did that all by hand for a while. Now I can barely walk. Well done. You got dozens of "will it start" videos outta that.

It would be a satisfying video to have seen the clean up for the new owner ,thanks for filming this one

31:52 nice setup. Keeps everything seperated and organized.

Great job! keep up the good work. The effort put in this video is amazing.

Something I’ve used to demount smaller tires and wheels is my hydraulic wood splitter. I just place them on the beam like I’m splitting wood and use the ram to crush the wheel then rotate and crush every 90 degrees. After your done the wheel will look like a 4 leaf clover and the tire will slide off easily. Good job processing all that scrap.

Great job sir, looks like you had a great helper in your son...my boy helped me scrap many times until he met the girl he was to marry and she was more fun than making money....

Great video. When I retired in 2006 I started scrapping in Mesa Az. Prices were good so it worked out well. I used a 16 foot flat car trailer with a winch and a 1 ton crew cab dually that gets maybe 6 miles to the gallon. My loads from the appliance place would average 4000 pounds. Prices here are so low had it not been for the big loads I would not have even broke even. At one point shred was at 2 cents a pound. That was around the time people called me like crazy but they go up and down daily here and not just a cent but copper will drop 25 cents I continued to scrap until the main place I obtained it all from ( a scratch & dent store that moved 10 miles farther away ) and began charging for their scrap. At 3 cents a pound it was not worth it barely covering expenses. Now the yard a few miles away won't take refrigerator's with freon in them any longer. He will without freon but I'm not setting myself up for an EPA issue. I will still haul scrap if I can get it but unlike the old days when I just had a Craigslist ad where people would call and give me truck loads of scrap metal it is none existent any longer. No one calls and there is really nothing to have and no one puts anything on the curb. I suspect people are selling it themselves given the crappy economy. Keep up the good work.

Thats some serious scrapping. Great video! Enjoyed it immensely!

the first some use a really good background music,rigth song. and a good job,man

Nice score there. Pulled alot out. And still some left. The machines helped get things I couldn't even see were there. Nice that u were close as well.

Watching you load up all those ride on mowers and the smaller tires and immediately thought "if someone is into small engine repairs, they could make some $$ off of refurbished lawn mowers" lol

Again it was a pleasure wathching you .take care.

You should give the new owner a price to haul the rest of the junk to the land fill. Get a reasonable amount of money for the landfill fees...up front. It's nice to see the metal being recycled, planet earth thanks you. Nice job!

Lol. Checking all the bushes for hidden scrap HAD to be one of the conditions of the deal. Great work dude.

I used to do that stuff when I was younger I still collect junk Keep the good workout

Had he come to you a couple of months sooner looks like you would have cleaned everything out. Great job

seeing you drive around the skidsteer reminds me of the bob the builder days

WOW, that loader is a Godsend! Makes short work of this kind of project. Thanks for the Vid!

So much work! Excellent job! Viewing from NC

differently worth the 100$ good job God bless you and your family my friend

How and WHY would anyone accumulate so much trash and spread it all over the property. I do not understand. Oh, and a motorcycle too. I want it. With your skills, I would you working with me any time. Your business skills are great. Hard work is always appreciated.

What “A POWER CLEAN UP ! Well Done Sir!

You came across an awesome deal and luckily had the means and equipment to move it, I know you were pressed for time but there was alot of stuff that Man left behind, although mostly small stuff, it looked like a lot of cast aluminum and probably some copper, and brass, just little things but they all add up on the check! Anyways great video and awesome scrap deal!

Some people know how to pile it up, Others Know how to scrap, Very few know that some of that stuff, Could have been cleaned up and sold for much more than scrap prices. I was a scrapper when I was young. With the knowledge I know now, I wish I could go back and kick my own butt for some of the stuff I took across the scales.

I'd take some of those old riding mowers! Except the one you dropped 😉

Great deal wins all around for everyone Amazing job So many opportunities big projects like that take a lot out of you mental and physical But the end result is so worth it

What a great work ethic you have. Just found your channel and will keep watching you do things you like and I enjoy watching. You should have way more subs. I’m going to stick your site in comments I make. Good luck brother. .....Mike..got to go now and catch up 👍😃

Loving your work.

Now if you wanted your property to look like shit then you nailed it!!

That's how you friend got started laying stuff around don't let it stay too long

Wow that was awesome ! What a mess leftover though for the new owners.... Hope you left them a card, for further cleanup.

Wow that was a heck of an undertaking, I enjoyed the video

One man’s junk… is another man’s treasure….👍🏽

What a great sound track to this video. BAMM

❤❤❤nice job.Your return of your money on all of it will great.

Great deal! The batteries in the old orange Lindè forklift thing are worth $500 dollars alone in scrap!

quite the operation.. here in AB Canada those beer an pop cans are 10 cent each..which you seem to have a small fortune of

Impressed! I hope you made some real money - you're amazing! You need to own a scrap company! Good Work! 😁

Thanks for doing it. If you hadn't got it Piedmont Lithium would have.

So much treasure 😳Great job and video thanks .

Dear AB guy. 👍👌👏 Oh WOW, simply fantastic. This was definitely a lot of work but also a lot of scrap metal value. Congrats! I hoped that the new owner of your friends property would let you take out the rest of the scrap metal too. There was still a lot of it sitting on the property. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards, luck and health in particular.

Good job. I do a lot of can recycling myself. I walk roads for cans plus have people save for me. I have done copper by the barrel but need to get it. I've done all the recycling for money.

Massive job! Well done

if my calcuations are correct it looks like you gained about $5,836.74 which is nice for $100 buy in of all the scrap you could haul.

Recycling is a very important issue. Have you seen a de-production line for cars? .. cars are stripped on a line and seperated and the company in the Uk makes millions of cash either as scrap or re-use ! Its a huge industry across here in europe. Sweden for example actually export due to the fact they have too much ! -------------- Your doing a great Job.

Ты хороший и отзывчивый человек.👏👏👏👏👍 Офигеть можно от этого, что и случилось со мной, я в шоке.

Tremendous work sir

This is a once in a lifetime deal!!

Great job, like your channel. That is a ton of stuff

That's a good s10 truck bed right there!! Worth about $250 to $400! To someone needing one

Looks like a fun day!

You scored big time

Buddy, you are very nice friend to your friend. I'd be charging his happy a$$ a lot of money to dispose of that hoarding trash.

Great videos👍

Great video and an insane amount of work! That 2005ish Yamaha TTR 125L should fetch a few bucks if you got it up and going :)

great job

way to go ,taking your time sorting the metals is how you maximize your scrap $ profits

I like the name of your channel.

❤ how you helped clean up that junk for that guy. From Tampa FL

There is a guy on RU-vid that shows how to break down those motors and transformers super fast to get the copper, forgot his name though

By the way your good at what you do .keep it up God will bless you😊

This is an impressive one-man show ❤❤❤❤❤❤❤❤🎉🎉🎉🎉🎉🎉

Awesome video keep posting ❤

That looks like fun. I never did a job that big

OMG that was totally amazing & satisfying !!!!!!.. You did so well, started of with a total disorganised mess into an organised mess.🤜🦘🤛

good job nice score!

What I’ve just watched suggests a new term. Mechanical weeds!

You'll have plenty of time for living in a van down near the scrapyard....When your living... in a van... down near the scrapyard!

At 20:20, that would make a good lawn mower carrier or just general purpose flat bed utility trailer. I have one of those trailers at 21:04 and there are times when those sides just get in the way.

👍👍👍👍👍👌Great video!!!

Two of those bowsers would have got you your $100 back by themselves here in England. Your mate gets his land cleared and you get a pay day, it’s how the world should work Enjoyed the video, thanks

That's a lot of work in that time frame

The smaller gage wire...make a 55 gal burn barrel and dump the wire in to burn off the insulation

AWESOME VIDEO BY THE WAY

Keep it up, your content is 100k+ subs easy.

Fair play to ya, you earn ya shilling. Did it ( on a smaller scale). Literally a carrier bag with a drop of non ferrous. It was enough to get you in to the boozer back in the 70's, here in Albion. Nostalgic.

How long did this take in real time??? There is no way for your viewers to know the time line unless you tell us. Blue Sky's.

Seems like he should have paid you for cleaning up that mess.

Just came across your channel. I did watch the whole video because it was interesting lol. Thanks for sharing, btw no price for what you got for everything?

Fairplay to you, 👍

awesome Job of it ,why did he wait so long ,it's amazing How people can't time manage and Procrastinate until the last minute and expect you to haul off years of accumulated junk in a few days, I'd be interested to Know how many trips you made, scrappers you gotta love them until ya have to move them

Your channel is going to do well my friend

-How many landmower can you hide ? -YES

Супер ,хорошая работа 👍🏻👍🏻👍🏻💯💯💯💥💥💥

There a fortune in pipe and I beams a long > Still a lot of money laying around.. Every one of those tanks is big money> Those tubs would make and excellent trailers. Those metal barrels would make some nice trailer. Get a welding machine and cutting torch, and go to town making trailers of all sizes. That what i did with junk around here was? Make yard trailer for lawn mowers, and UTV's

I would say you definitely won on that deal. Lot of work there, but for sure a win. Did I see a silver craftsman riding mower? I have one a free salvage I fixed up and started using this yr. If so I would be interested in the headlights for the right price.

RIP to the tractors and equipment, its unfortunate so much gets scrapped, but thats the way she goes.

I would wait for a dark night and light those tires up, than pick up the wheels and wire and scrap it, probably the best bet with those.

Hit a lick nice score!!!!!

Pass those mowers on to Mustie 1 for restoration.

Impressive!

So what was the approximate time ? Fuel costs ? And was your time worth , in other words about how much did you make for your effort in scrap so far ? That's the main reason I watched the whole video !

i used a 4-1/2inch Heavy Duty Cut Off Wheel Angle Hand Grinder to cut the copper off the motors