Live Discussion: E-flite Carbon-Z Cub SS 2.1m 

I saw one of the T-28s and it is amazing!!!

Pc-21 is a jet

Pc-12 is a turboprop

I own the 2.0mtr large scale original but, discontinued T28-Trojan and find that they are Both far and between being similar in flight control and one is a sports aircraft (carbon z V2.0 and the Other more a scale flyer (Trojan T28).

So do I since I'm 75, my reflexes are a bit slower. Some of my club members think SAFE is not flying BUT.......I always bring my planes home with me after flying...in one piece !!!!

I agree with you all the way 100 percent!!!! I still wonder, why????????

Billy Jack I ihad the same issue, what is it and where to put them. At first I thought it was something as a mesh filter frame for the air intake :-)

stefano ath Yes

NX10 is a bit less complex than iX12 and still has plenty of channels and features that most people will never outgrow! Outside of that, if you prefer a touchscreen and Android interface iX12 is the way to go.

Ron Elliott no, this is not a first airplane, it could be a second one, but better a third one. Check out the carbon cub RTF or the apprentice/mini apprentice, or the umx champ or cub, but there is a lot more trainer airplanes like the bixler, etc.

You should get an E-flite Apprentice STS as your 1st airplane. The STS is the best beginner RC airplane in the market no doubt about it!👍🏾👍🏾👍🏾👍🏾🌵😷🇵🇷

This plane is for 14 or older rated my friend!... 👍🏾👍🏾👍🏾

We currently offer the HobbyZone Carbon Cub S 2 ( www.horizonhobby.com/search?q=Carbon+Cub+S+2+1.3m&search-button=&lang=default ), which is set up for optional flaps and has a 1.3m span. And although the RTF version is geared toward beginners, the BNF Basic version is perfect for intermediate to advanced pilots! As you can see this video (especially after the 2 minute and 40 second mark), it's capable of aerobatics, float flying and more: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Wgsq8VQZrG8.html

The Carbon-Z Cub SS 2.1m BNF Basic version will now be available with a Spektrum AR637TA receiver and a Smart Avian 60A ESC! And yes, you can use that receiver and ESC to reverse the motor :) See this new version here: www.horizonhobby.com/product/carbon-z-cub-ss-2.1m-bnf-basic-with-as3x-and-safe-select/EFL124500.html

That's what she said!...😅😂🤣👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾

Contact HH and ask...

@@ricardopr54 i got a private message on yt that i definitely should not point to the left and should contact horizon tech support. Sended them all of the pics but they say i need to contact my lhs. Which is closed because of covid..

@@cnnlt200 Send them another email and request a return label so you can send the plane back. That's BS on their part to refer your issue to your Local Hobby Store... If they won't do that and give you a replacement aircraft or refund after returning it, then Sue their asses! This planes aren't cheap and it is disrespectful on their part to do that to their clients...

They are expected to arrive in the UK late September. If you haven't pre-ordered one already, we recommend you do so!

Nop!

In stock here: www.horizonhobby.com/product/carbon-z-cub-ss-2.1m-bnf-basic-with-as3x-and-safe-select/EFL124500.html The updated Carbon-Z Cessna 150T 2.1m is also in stock: www.horizonhobby.com/search?q=cessna+150t&search-button=&lang=default

@@HorizonHobbyProducts I am in Canada and I may have found one today. :)

We do NOT recommend this model as a trainer! It could be a good second but would be a better third model after learning to fly with something like the HobbyZone Carbon Cub S 2 1.3m ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Wgsq8VQZrG8.html ) then moving up to the Turbo Timber Evolution 1.5m ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qVAveeNrDVY.html ).

@@HorizonHobbyProducts thankyou. I was considering the Carbon Cub S2, you helped me make up mind.

Very easy to fly. Better in the wind than an apprentice. Tail daggers land easier imo.

Timothy Nettesheim thank you!

If you're practiced with your ground rudder work you will be fine. This plane is very docile and forgiving but does need some rudder work on the ground

The Carbon-Z Float Set will fit is model as well.

@@HorizonHobbyProducts Thanks so much for the answer. I really like the looks of this plane and I'd love to see it fly from water. All the best.

Harpoon_Bakery hard compared to what?

@@michaelsell6928 to non-dihedral

This is a very stable plane especially when using AS3x. If you have mastered a high wing trainer with it without dihedral you can handle this.

Dihedral basically gives you some self righting ability. With a flat wing you have to fly the plane and level wings yourself is all.

With safe select activated all you have to do is let go of the sticks and it will level itself out.

Not in particular. It's a perfect second plane, however. Take a look at the Apprentice STS, the Aeroscout, or the Carbon Cub S+ for a first plane.

HorizonHobbyProducts yes that’s what I bought my daughter but she says it’s a. Little small to see she flys high up and now has been bringing down closer to the ground. She’s only 9 but flys great she started with drones now carbon cub s+ but she keeps saying something bigger would help her see it. So was just curious. We don’t know all the Lingo but she flies with me in both of my real planes and so I think she got the concept very fast she also takes control on my real aircraft once we are up at altitude of corse Im on the other stick but literally she flys great she has only wrecked her RC plane twice and I thought this might be a good step what are your thoughts.

Done!... Available now online! 2020👍🏾👍🏾👍🏾🌵😷🇵🇷