Live Video: DeLonghi Dedica Full Tutorial!

Просмотров 73 тыс.

% 1 086

In this video, we look at a full tutorial of how to use the Delonghi Dedica EC685. We will make an espresso, do a cappuccino, and talk about the right type of beans and grind settings. We will also do a Q & A if you like.
----------------------------------------Products used/recommended ------------------------------------------------------------
(these are affiliate links that help fund videos like this, at no extra cost to you)
► Nice Quality Basket Set:
🇩🇪 amzn.to/36AD0Ut
🇮🇹 amzn.to/3h3jvpd
🇫🇷 amzn.to/3vsKkKf
► Cheap, but good Basket:
🇩🇪 amzn.to/3BMDNwT
🇺🇸 amzn.to/3shPHvP
🇬🇧 amzn.to/35jo8sA
🇨🇦 amzn.to/38Bxced
🇸🇪 amzn.to/3FaZjNI
🌎 geni.us/2CupBasket (Amazon link for rest of world)
► Bottomless Portafilter:
🇩🇪amzn.to/354PYZX
🇺🇸 amzn.to/3rGdnck
🇬🇧 amzn.to/3ETFYAk
🇨🇦 amzn.to/3w18P1L (comes with basket)
🇦🇺 amzn.to/3vAJ7SK (comes with basket)
🇸🇪 amzn.to/3MAV802
🌎 geni.us/BottomlessPF (Amazon link for rest of world)
Delonghi 51mm Tamper:
🇩🇪 amzn.to/3ywSggA
🇺🇸 amzn.to/370UQjM
🇨🇦 amzn.to/3vx3lwk
🇬🇧 amzn.to/3y4SHif
🇸🇪 amzn.to/3F6n1KJ
🌏 geni.us/DeLonghiTamper (worldwide Amazon link)
🛠 Grinder Suggestions: kit.co/tomscoffeecorner/grinder-suggestions (Amazon)
🛠 Further Dedica Gear: kit.co/tomscoffeecorner/delonghi-dedica-accessories (Amazon)
----------------------------- Offers on other products I use ----------------------------------------
► Try Amazon Prime: amzn.to/3OCskp2
► Amazon Prime Abonnieren: amzn.to/3N9wSly
► Get 60% off NordVPN (I use this all the time): bit.ly/3sEG8Xc
► Start your own AirBnB! bit.ly/3t9kxXd
----------------------------
DISCLOSURE: Some of the links on this page are affiliate links, meaning, at no additional cost to you, I may earn a commission if you click through and make a purchase and/or subscribe. Affiliate commissions help fund videos like this one.
#TomsCoffeeCorner #DelonghiDedica #DelonghiTutorial

Хобби

Опубликовано:

2 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 160

@BigDaddysBearCave 8 месяцев назад

Tom I love your channel so much!!! I worked in a cafe in college and your channel has been getting me in the mood to build a great home set up!!!

@TomsCoffeeCorner 8 месяцев назад

Awesome! Thanks so much for the feedback!

@armandoperez5161 9 месяцев назад

After watching your video three times, I finally made an expresso that I like, thank you.

@TomsCoffeeCorner 9 месяцев назад

Glad I could help!

@YouMine_ 6 месяцев назад

expresso...

@gerrit-janslettenhaar4252 2 года назад

Thank you again for this informative and entertaining video!

@TomsCoffeeCorner 2 года назад

You betcha, Gerrit!

@rgeorge9260 11 месяцев назад

As always, great video! I learn a lot watching your videos! After your response to my queries the other day, I've made some minor adjustments, the biggest using a shorter cup under the filter, so I can place my Black Mirror scale underneath, and get the timing / output for the extraction right! Awesome! Thx again!

@Voltar78 2 месяца назад

The best video so far!

@stephenmartin4533 Год назад

Hi Tom. Just used my dedica for the first time . . Lots more to learn!

@TomsCoffeeCorner Год назад

Haha, yes it is a hobby. Have fun!

@giannao3370 Год назад

Me too!

@anthonyschumacher9925 2 года назад

The mystery wife revealed! Jelly Beans! Love it. Jealous about your latte art. I can't pull it off at all and I've tried numerous times.

@paetgmeiner3620 2 года назад

I just modded my dedicia with a saeco opv and a Manometer. Now it works perfect, thanks for all your work!!! Next step will be modding temperature close to 94°C and it will beocme a perfect portable espresso machine....

@TomsCoffeeCorner 2 года назад

Sounds great! Which Saeco OPV did you choose? Did it fit as it was, or did you have to adapt it?

@paetgmeiner3620 2 года назад

@@TomsCoffeeCorner I have used Vibration Pump OPV from bluestar coffee and saeco memran opv to reduce pressure oscillations. The Vibieme opv has an easy to use adjustable valve. Sadly it uses +0.4 inch of space--> so I had to drill a hole into the casing to make it fit. On the other hand I can adjust pressure anytime;-)

@blindinstrument8588 2 года назад

@@paetgmeiner3620 so you're using two opv's? I'm trying to figure out how to mod my dedica and its getting confusing

@nonfussynonfussy 7 месяцев назад

Hi Tom, thanks for this video - really helpful. Did you do anything to mod the rubber steam wand nozzle? I've tried to use the steam wand without the sleeve (i.e like you are doing in this video) and the rubber nozzle keeps getting blown off by the steam!

@nonfussynonfussy 7 месяцев назад

Ha! Just seen your recent post about replying to comments, so no bother if you don't get to this, but if anyone else can help, I'd be grateful 🙏🏻

@TomsCoffeeCorner 7 месяцев назад

Hi there! you just have to put a zip tie on it. Check out a picture here on this blog: tomscoffeecorner.com/delonghi-dedica-the-ultimate-review/ It's about 2/3 the way down the page.

@nonfussynonfussy 7 месяцев назад

@@TomsCoffeeCorner Oh, perfect - thank you 😊

@maxthemagition 2 месяца назад

It was a double shot you made for each cup....Very strong!

@Voltar78 2 месяца назад

Double shot from 16g is not strong at all.

@sergio09p Год назад

Hi Tom a love your channel! One question ive been really struggling with getting the milk texture! I get the milk too hot with the Rancilio silva wand, should I lower the temperature mode from hot to medium or low to have lore time?

@TomsCoffeeCorner Год назад

That temperature is just for the espresso, not the steam. It just takes practice. Check out Emilee Bryant or Lance Hedrick for more tips.

@269211 2 года назад

Hello Tom, great channel and very understandable explained. But now I have a big problem with my DeLonghi Dedica. According to your recommendation I bought a bottomless filter with the Graef basket. But the result is terrible, because I don't get any Crema. If I use the original it is perfect. Where is the problem?

@TomsCoffeeCorner 2 года назад

Hi Harry, I made this video to answer exactly that question: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-00NSG9459a8.html Cheers! Tom

@269211 2 года назад

Thanks Tom, I will follow all the advices an than I'll let you to know, if I have further problems.

@BerdLow 3 месяца назад

Hi Tom, greetings from Singapore I have been watching your videos n learning lots of tips . Can U tell me the espresso setting on your Specialita for the EC685? I know it is subjective but I m just curious Cheers

@TomsCoffeeCorner 3 месяца назад

Hi there! I am 2 notches away from the 0 calibration point, with my beans of choice. Cheers!

@hugotendam5349 9 месяцев назад

Hi, Tom. Have been binging your videos since I found myself a dedica basically for free. Love the content you made. What is your preferred recipe, e.g. ratio of grams of coffee grounds to grams of water out for the dedica?

@TomsCoffeeCorner 9 месяцев назад

Thanks! 16g in, 30-35 out. Cheers!

@seba300PL 2 года назад

It's hard to find a good channel with coffee tutorials. Thanks. Maybe a tutorial with coffee art or 10 coffee beans that you recommend ? :)

@TomsCoffeeCorner 2 года назад

Great suggestion! Coffee beans depends on where you live though. I know some good ones in Germany, and in the USA. It's best to find a local roaster.

@Oblivianos 8 месяцев назад

when using the pannarello how does the frothing technique change? do you still tilt the jug that much?

@TrangHuynh-hz9vb 11 месяцев назад

Could you make another video about the coffee machine and steam the milk more details .

@LuzzattoMarco 5 месяцев назад

Dear @TomsCoffeeCorner i follow your videos with great interest. I have a Dedica Delonghi EC 685. If I try to froth the milk without the Panarello, after a while the pressure causes the black rubber tube (nozzle) to pop off... I think it's normal... there is a valid solution to ensure that it doesn't do you skip the black rubber nozzle? Thank you for answer.

@TomsCoffeeCorner 5 месяцев назад

Use a zip tie. Cheers!

@neeturathore3482 2 года назад

Hi Tom, I’m brand new to all this.. can you help? I have no idea where to start.

@TomsCoffeeCorner 2 года назад

How can I help you, Neetu? Do you already have a machine, or need help choosing one?

@eleonoramanfroni4911 Год назад

Hello Tom. Thanks for your great tutorials. One question: I got my Dedica one week ago and it seems i am not able to get a warm coffee out of it. I usually don't love very hot expresso but it seems impossible to get at least a warm one... although i already set the highest temperature. When the coffee hits the cup it is already almost cold. Have you ever experienxed this? Thank you ❤

@TomsCoffeeCorner Год назад

Have you tried warming your cups? Also try running just water through without coffee 1-2 times to warm everything up.

@hkauprentang3847 Год назад

Hi tom, greetings from Indonesia ! First of all i'd like to thank you for making so many informative videos, especially in regards of ec685. And i ended up bought one last week, did all your tips (the simple ones), and i love this machine hehehe. However, i have a question about the milk steam. The steam always comes out late. I mean when i turn the steam knob, it takes around 2 seconds for the steam to gradually come out. Is it normal?

@TomsCoffeeCorner Год назад

Yes, it takes time for the steam to build up and exit. You should purge the condensation water first anyway. Cheers!

@hkauprentang3847 Год назад

@@TomsCoffeeCorner I dont know why i cant post a comment with a link :( If you may please check shorts i made in my channel tom. So maybe you can see what my concern is about :)

@DocHoliday596 Год назад

Thanks for all your videos! I just received my dedica and I'm not sure how to start. It says I need to clean the parts with warm water before first use but I'm not sure which parts it means.

@TomsCoffeeCorner Год назад

Just give the parts a rinse in warm water, dry them off, and you should be good to go!

@DocHoliday596 Год назад

@@TomsCoffeeCorner thank you!

@juppertan 2 года назад

DR Congo = Democratic Republic of Congo. Love your content! 😊

@TomsCoffeeCorner 2 года назад

Sweet! Thanks for watching

@scottscottsdale7868 Год назад

And Kivo is the name of a town in eastern Congo. It is very center of Africa. I would also try coffee from Madagascar.

@kingece882 2 года назад

Hi Tom! Thank you for your channel. I have one question can you please advise. Question is coffee not flow out from portafilter if I ground with fine setup does my machine has problem.

@TomsCoffeeCorner 2 года назад

Hi Hassan, I really cannot tell without more information. Maybe you could upload a short video?

@samirkel1 Год назад

Hi Tom, I bought the Dedica about 8 months ago and a few months later got the bottomless portafilter. I have a few questions. I would greatly appreciate your reply. 1. I live in India so getting access to a good portafilter was difficult but I got one from Amazon imported from China. My issue is that I can barely get more than 10 grams of coffee in it. I grind it at 3.5 grind size. Further, if I add more, the machine hangs, and all lights flash. 2. Either I have to remove the portafilter, throw away the coffee, and fill it with less and press the 2-cup button again. Sometimes, it works and the coffee is extracted. 3. When I steam the milk, I saw that the single and double cup buttons light up. I saw that here too. Is that a sign that it's overheated? When I try to extract another cup, I switch the machine off and on again. Should I just press the one or two cup button? I'm scared to do something that will damage the machine. 4. Grind size - I don't have a grinder at home but my local coffee shop is just down the road. After trying a lot of grind sizes, I figured that the 3.5 size works best for the bottomless but I can't get a good extraction if I fill more than 10 grams. Should I go coarser? Would really appreciate it if you could help me with the answers. Have a good day and keep the videos coming!

@TomsCoffeeCorner Год назад

Hi Samir! I don't know which basket you are using, but most double baskets hold 14-16 grams. You will need your own capable grinder, or you won't be able to dial in. As for the lights flashing after steaming, that means the machine is too hot to pull an espresso, and you have to cool it down. Check out my most recent video on that: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JMyo5A6M_9k.html

@wsaliawan Год назад

After see your video, finally I buy dedica arte,

@ivancanales9634 2 года назад

Hi Tom! Thanks for the video. May I ask the name of your tamper? Thanks

@TomsCoffeeCorner 2 года назад

Hi Ivan, it is this one: amzn.to/3xJQpVf

@tradycyjnegoleniezbartgee Год назад

I'm wondering to buy Eureka Mignon Specialita grinder for my Delonghi Dedica and wondering if a standard Dedica portafilter fits into Mignon Specialita's portafilter holder. I see an adjustment screw, but will the portafilter fit in there, Tom? I use the standard Dedica portafilter with a plastic insert taken out with a non-pressurized basket.

@TomsCoffeeCorner Год назад

Hi Trady, no it does not fit - it's too tall. The bottomless ones don't fit well either, since they have no spouts to hold them in place. Therefore, I use either a dosing cup, or just hold the bottomless PF in place during the grind.

@tradycyjnegoleniezbartgee Год назад

@@TomsCoffeeCorner thank you for the answer. Does it mean I can hold the standard PF in place during while grinding or it doesn't fit there at all? If the latter, it seems I will buy a bottomless PF or a dosing cup. Is there a dosing cup you recommend for Dedica PF? Good quality and not so expensive. Cheers, Bart.

@TomsCoffeeCorner Год назад

@@tradycyjnegoleniezbartgee Hey Bart, you can just use any little cup you have in your household, you don't need to buy one. As long as you have a dosing funnel, anyways.

@TomsCoffeeCorner Год назад

@@tradycyjnegoleniezbartgee The original PF will not fit at all on the Mignon.

@tradycyjnegoleniezbartgee Год назад

@@TomsCoffeeCorner I see there's an option to remove the PF holder (aka fork as they call it) completely without even a screwdriver. So when I remove it I can use any portafilter. I'm used to holding PF myself. I did it while grinding on Graef CM702, which sadly got broken. After 4 years of intensive usage one of supporting legs in a hopper cracked and a piece of a plastic fell into the burrs. Then it caused the upper burr plastic holder crack. I could order the upper burr with the holder, but probably the best would be to replace both burrs. It's not viable because the upper and the lower burrs would cost almost the same as a new CM702. So I made a decision to go a step further and save some money to buy Eureka Mignon Specialita. Will get all money for that purpose in July/August. For the moment I use 1Zpresso Q2. It's capable of espresso grinding, but it take 1 minute and 20-30 secs every morning 😁, so usually it wakes me up before I drink the espresso 🤣. I could buy Graef CM902 now, but decided to save money to buy Mignon Specialita. I suppose burrs mounting is the same as in CM702, so there are plastic mounts too.

@PL-ht3xw 10 месяцев назад

Hi, Of I use the Stemmer without the attachment, the Silikone cone always flakes off. Any idea why that happens?

@TomsCoffeeCorner 9 месяцев назад

You gotta put a zip tie on the rubber nozzle to keep it on. Cheers!

@LieberLois Год назад

Hi! Quick question, sometimes when I enter "milk frothing mode" and start frothing, the machine justs stops and then starts pulsating. Any idea what I'm doing wrong? Great video, my first cappuchino was awesome!

@TomsCoffeeCorner Год назад

The machine automatically goes back to coffee mode after 10 seconds of not being used in steam mode, and cools down the boiler while pulsating the water.

@LieberLois Год назад

@@TomsCoffeeCorner thanks! Thats it! Just one more thing, the Milk appears to get hot reeeeallly quickly, is there a way to slow down the heating a little bit?

@JustinPulitzerTrades Год назад

What is the steamer modification you used?

@TomsCoffeeCorner Год назад

Just remove the panarello.

@scottscottsdale7868 Год назад

Fresh alpine milk. Wow that must be good. Or is it just a brand name for regular cheap milk?

@TomsCoffeeCorner Год назад

Haha, yes it is from farmers near the alps region.

@giorgalisarmani9947 11 месяцев назад

Hello Tom. When iam trying to make cappuccino the milk gets too hot before it even starts raising to top. I count it and it gets too hot in about 20 seconds and i can't even touch the bottle after that.Do you have any solution for that problem?

@TomsCoffeeCorner 11 месяцев назад

Are you starting with cold milk? Also, you have to make sure to inject air right away at the beginning. Cheers!

@guilhermefalk916 2 года назад

Hi Tom! Can you explain how to deliver 9 bars on the Dedica? It is just to not tamp too hard? Also, the claimed 12 bars its measured with the artificial pressure from the pressurized filter?

@TomsCoffeeCorner 2 года назад

Hey Guilherme! The maximum this machine can deliver, measured at the Porta filter is 11 bar. However, that is only if using a blind disk. I also installed an in-line manometer, and found the extraction to be between eight and nine bar with an espresso puck. Just check out my video on how to install a Manometer. 👍🏻

@rsoma39 2 года назад

I’m having a hard time keeping the nozzle on. It pops off every time i try to froth milk. Even though I installed a cable tie to keep the nozzle in place (the exact same spot as yours), it always blasts off. What should I do?

@TomsCoffeeCorner 2 года назад

Hmm, my cable tie does the trick. Could it be that your cable tie is a little too big, or maybe not tight enough?

@rsoma39 2 года назад

Probably the same size as yours. I cant pull it any more tight than it is now. Maybe the pressure is too much?

@sjli1484 2 года назад

@@rsoma39 I think u r not placing the cable tie at the right point, right high. I took off the panarello 6 months ago, fixed the rubber nozzle with a cable tie like Tom’s one and it is still working.

@walter-- Год назад

the steam wand..: actually I have the impression it steams better when you choose the hot milk setting. Just find the right stop in the mild and it works fine. No idea why they did this dual mode version...

@bosiorne2292 6 месяцев назад

what cheap manual grinder you reccomend for de longhi dedica?

@TomsCoffeeCorner 6 месяцев назад

Kingrinder K4 is my favorite.

@Sky.Sky. Год назад

Great vids. Please help me dicide between a rancilio silvia pro x and a ascaso duo steel pid. I am just put off about heating time on silvia, can't wait 30 min in the morning. On the other side not sure about ascaso reliability, didn't heat much about that company. Thanks a lot

@TomsCoffeeCorner Год назад

Hi there! Thanks for the question. To be honest, I have not had a Silvia Pro X yet, but I have had the Ascaso Steel Duo Pro, and I used to own a Rancilio Silvia. These are two different machines. The Ascaso has 2 thermoblocks, while the Rancilio has two boilers. The Ascaso is a newer company, while Rancilio has been established longer. Aesthetically, I prefer the Ascaso, but that is subjective. Longevity wise, I am guessing the Rancilio will be better. Both machines benefit from at least 15 minute start up time, to get the brew head and portafilter warmed up. But you can likely put both on a wifi timer. Which do you like, looks wise? Which market are you in? Do you prefer thermoblocks over boilers? They are both expensive, so I would suggest you watch a bunch of YT videos from different creators on both machines. Curious, which one you choose! Tom

@seba300PL 2 года назад

I have problem with proportions. I don’t understand that very well. When I am making espresso with 14g of coffee, there should be 28-30s time of extraction and that is equal to 28g of espressoo? What about milk? How to calculate that? In some portafilters you can make 18g of coffee and in another only 7g. How to calculate how much milk do I need to for example cappuccino? Sorry for so many questions, but i didn’t find any video which explain that really well 😅 Another suggestion from me is that you can make a video on interpreting coffee bean descriptions such as 7 intensity or 5 strength :)

@TomsCoffeeCorner 2 года назад

Hey there! It is pretty simple, actually. If you have 14 grams in, then aim for twice that, or 28grams out. You can aim for 20-25 seconds. It kind of depends on the flow rate of the machine, without load, which is kind of high for the Dedica, and Gaggia, too. Each basket will have its own weight, but they are generally 7-8 grams for a single, or 14-16 grams for a double. Just fill up the milk to the bottom of the spout, and start spinning. Add a little air first, then incorporate. 👍

@seba300PL 2 года назад

@@TomsCoffeeCorner Okay, then when I have 7-8 grams in basket, then I aim for 14-16 seconds and I get 14g of coffee? Is that right? And second question, I think the last ;D, when I have a basket which holds for example 20grams of coffee, then can I make therein 7-8 grams of coffee? I am asking because in one forum I read that the pressure will be worse and I should use smaller basket for smaller amount of coffee.

@TomsCoffeeCorner 2 года назад

@@seba300PL Not quite… You are looking to get a one to two or a one to three ratio. So so if you put 20 g in, you should get 40 to 60 g of liquid out. The timing just tells you if you need to grind finer or not.

@seba300PL 2 года назад

@@TomsCoffeeCorner Now i get. Thank you :)

@danitopizza Год назад

Hallo. Ich habe mir auch diese Maschine geholt. Bei drücken des Starrknopfes in der Mitte braucht die Maschine ca 36 Sekunden. Außerdem wenn ich die Tasse nach dem einfüllen wiege habe ich 85g insgesamt. Der Sieb war mit 14g Kaffee befüllt. Mach ich etwas falsch ?

@TomsCoffeeCorner Год назад

Wahrscheinlich zu grob gemahlen, und/oder zu alte Bohnen. Diese Videos könnten helfen: How to extract the perfect espresso: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-piO6c695Op8.html How to Get Crema: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-00NSG9459a8.html Why Supermarket Coffee Beans are RUINING your Espresso! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5BgMKqu8fJI.html

@shazk9420 2 года назад

What portafilter are you using?

@TomsCoffeeCorner 2 года назад

Hey there! I just updated the description with accessories used. It is from Normcore.

@CeeSA70 2 года назад

unfortunately it is not available at amazon.de, right now.

@TomsCoffeeCorner 2 года назад

@@CeeSA70 I ordered mine from Amazon.com

@dadoeluno Год назад

Cómo haces para elaborar otro espresso después de usar el vapor ? Yo no puedo , las luces no quedan fijas nunca.

@TomsCoffeeCorner Год назад

Just run water through the steam wand until it stops automatically. Then the machine will be cooled down and ready for making another espresso.

@arlo80085 Год назад

Just bought this machine, but mine cannot pump 14grams of coffee grinds ? Maximum I tried is 11grams. Any inputs?

@TomsCoffeeCorner Год назад

I would try a non pressurized basket...it has more volume. Cheers! 2 Cup basket: geni.us/2CupBasket Tom

@hautinip9729 2 года назад

Hi Tom, are you using Eureka grinder ?

@TomsCoffeeCorner 2 года назад

Yes sir, it’s this one: geni.us/EurekaSpecialita

@fasterdanu1 2 года назад

Hello, Maybe you can help me out I'm using the Dedica with a 1z expresso hand grinder set too 14.5 along with 1 week old beans and can get extraction 14g in 28 out in 23sec but it seems to always be on the sour side any thoughts crema Is good shot looks beautiful but is sour ?

@TomsCoffeeCorner 2 года назад

Hi Antonio, it sure seems like you’re doing things right. Are these light roasted beans? Have you tried the temp hack? Some beans, I’ve found, are just simply acidic no matter what. But I’m guessing they are a light or medium roast. Have you tried another bean?

@fasterdanu1 2 года назад

@@TomsCoffeeCorner Hey Tom! Thanks for your reply. Yes they are Medium Roast described as balance between chocolate and Carmel with bright fruit Finnish. I'm very new to exsperesso and thus just tried the freshest beans I could get maybe that's my problem and I need a darker roast. Would a higher temp cut back on acidity? I could try the temp float hack u mentioned cycle steam for three blips and then brew. Again thanks for your vids and support!

@TomsCoffeeCorner 2 года назад

@@fasterdanu1 Yes, try the temp steam hack. But just know that some beans will have acidity no matter what. I have some nice medium roasted beans, that are quite acidic, regardless of the machine I use. Where are you located? Maybe I could suggest some beans.

@NeFeNeR 2 года назад

Hi Tom, I would like to ask you a question that I have been searching for an answer to and I think you will be able to help me with it. I have a delonghi dedica and while making espresso the water keeps leaking out of the steaming wand. Which causes loss of power and pressure during brewing. I have tried descaling it a few times but it hasn't helped. Do you happen to know what can be done about it?

@TomsCoffeeCorner 2 года назад

Hey Gabriel, I am guessing this valve needs replacing: www.juraprofi.de/DeLonghi-Ersatzteile/Ventile-und-Schalter/Dampf-Heisswasserventil-fuer-DeLonghi-EC::16324.html

@NeFeNeR 2 года назад

I've already ordered it. I hope it will work. Thank you for your help.

@NeFeNeR 2 года назад

Hi Tom, so the valve has been delivered to me, I have replaced it and everything is working as it should. So thank you very much for your help.

@TomsCoffeeCorner 2 года назад

@@NeFeNeR Awesome! Happy to hear it!

@NeFeNeR 2 года назад

If I may ask again, when I cleaned the delonghi, I disassembled it and now I'm not sure which side the spring in the head is supposed to be. This is an illustration picture with the spring: cdn.hackaday.io/images/4414911545930736838.jpg Was that spring supposed to be ball up or ball down?

@km111ism 2 года назад

I try to prepare from 7grams of coffee single espresso but The extraction takes only 15s. I make that in double basket. Do I need single basket for single espresso?

@TomsCoffeeCorner 2 года назад

Yes you do. There’s too much head space otherwise.

@km111ism 2 года назад

@@TomsCoffeeCorner I noticed that a lot of people say they do a single espresso but they give 14grams of coffee. Does it dependens of ratio?

@giannao3370 Год назад

Can you do a tutorial on how to reprogram machine newbie here!

@TomsCoffeeCorner Год назад

Here you go! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-M8NBbSyHDO0.html

@minshu12 Год назад

After you have made your coffee heated the milk the lights start flashing. If i want to make another cup of coffee, i can't use it. I need to push the power button, turn on again to make another cup. Must be a simpler way.

@TomsCoffeeCorner Год назад

That is the first question I answer with this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JMyo5A6M_9k.html

@di-ma4811 Год назад

Hallo Tom, welchen Mahlgrad verwendest dubei der Eureka?

@TomsCoffeeCorner Год назад

Servus! Ich schaue erst mal wo der Referenzpunkt ist. Fuer frische Bohnen, bin ich ungefaehr bei 1,5-2,0 Inkremente weg von dem Referenzpunkt. Bei aeltere, oder Supermarkt Bohnen, eher 1,0 Inkremente entfernt. Gruss!

@di-ma4811 Год назад

@@TomsCoffeeCorner Danke für die schnelle Antwort :) Eine Frage habe ich noch. Ich habe die graef cm 800. Wenn ich bei ihr auf Fein stelle, kommt bei der Dedica kein Kaffee raus, weil es zu Fein ist. Warum funktioniert es bei der Eureka?

@TomsCoffeeCorner Год назад

Du musst dann etwas grober einstellen. Gruss!

@miSta1982 Год назад

Have you got a link to the cappuccino pot? Or how ml?

@TomsCoffeeCorner Год назад

Sure thing! geni.us/Anpro400ml That is a 400ml one. Cheers!

@miSta1982 Год назад

@@TomsCoffeeCorner 🙏🏽 thank you 😊 I am not a native speaker I mean the cup sorry 🙈 Tasse 🍵 in German

@TomsCoffeeCorner Год назад

@@miSta1982 Kein Problem! Du hast Glück, denn die Tasse ist deutsch! amzn.to/3WYXID5

@lifeofash425 2 года назад

Hi Tom! Thank you for your channel! I'm a newbie in espresso brewing and watched your videos carefully. I just bought a dedica and was wondering if I'm doing something wrong. The espresso is great but my puck is wet all the time. Slight water is left on the puck. I'm using bottomless filter. Am I doing anything wrong?

@TomsCoffeeCorner 2 года назад

Hey Ashelee! It depends on various things like grind setting, puck density, the kind of beans, and so on. Mine are quite dry, but I let them sit for 1-2 minutes afterwards. There is still pressure on the group head since there is no 3 way valve. So, don't remove the portafilter too early. Cheers!

@lifeofash425 2 года назад

@@TomsCoffeeCorner thanks for replying! I’ll take in your advice and experiment a bit to see a difference.

@chryseass.5143 2 года назад

Thanks Tom, this was quite informative. I am about to order a Dedica ,I have a Bambino Plus elsewhere so I wil be interested in comparing the two of them. I am looking forward to some great morning cappucinos but not as well crafted as yours!

@gaborsimko3870 10 месяцев назад

@@chryseass.5143 Hello. What was your experience with using both the bambino plus and the dedica? I’m having the dedica but thinking to swap to bambino plus. Which one did you stick with at the end? Which one did you prefer to use the most? Thank you!

@chryseass.5143 10 месяцев назад

@@gaborsimko3870 Hi Gabor, I guess that I am "lucky" to have three different machines to use and can heartily recommend that you spend the extra cash to buy the Bambino Plus. It is a much better machine than either the Dedica or the the Bambino. I have all three set up with bottomless portafilters which is a 'must' in my opinion. The Bambino Plus ( and the Bambino) has a bigger basket than the Dedica 55mm as opposed to 51mm and the steam wand is the best of the three of them by far. If you can get it on sale that would be even better. I hope that helps you to decide! Btw, I pair the Bambino Plus with the Breville Smart Grinder Pro.

@Jonniinglish Год назад

Если не использовать выравниватель WDT, то таблетка получается не всегда ровной, и иногда пробиваются мелкие струйки через пустые полости в таблетке.

@greg7469 Год назад

14 grams total is that 2 shots or 1 shot? Thanks

@TomsCoffeeCorner Год назад

That’s a double. 👍🏻

@greg7469 Год назад

@@TomsCoffeeCorner i followed your advice for doubles i used the factory spoon 2 scoops tampered its good crema came out but when i tasted it it taste bitter i know i did something you think

@greg7469 Год назад

I used gevalia espresso roast ??

@ln663 2 года назад

For some reason, I'm having a hard time to get the milk to swirl with the stock wand. I end up with unmixed air that only sits on top.

@TomsCoffeeCorner 2 года назад

Takes practice, keep watching, and trying. You need the right angle and tip depth.

@lifeofasoldierswife1829 Год назад

Can we make 2 espresso shots at one go ?

@TomsCoffeeCorner Год назад

I always do a double - 15 grams.

@vogartgael Год назад

De qué marca es la báscula ?

@TomsCoffeeCorner Год назад

Timemore

@mhrfrtkr Месяц назад

As for single shot and double shot can you give numbers again? Ratio seconds and grams please. I assume you did double shot cappuccino for your wife right?

@TheCoffeeHubGlobal 2 года назад

👍❤️yo yo brother nice

@edmilner 7 дней назад

lol, I think the DR CONGO is for Democratic Republic of the Congo not doctor, great video btw

@sunshinehwy 3 месяца назад

I thought Cappuccino has the least milk, wouldn't this be a Latte?

@redeye8386 2 года назад

Dedica is cheap machine thats true but it deppend on who use them. Like today i bought double espresso from famous coffee shop just to test how its taste again mine with they coffee machine with was daamn expensive and at end my coffee tasted way better even though i use Lavazzaa gusto pierro , on my dedica with they bad plastic portafilter with i ordered bottomless but still not arrived :( .but with case of i grinded it not that good but still i am little proud again what they gave me 😂. Will try test pre grinded coffee from lavazza if its better than my bad grinding 😂

@redeye8386 2 года назад

But still i am so terrible with making milk and cant get it right . I tryed get out that tube from it but then that robber fall off so i put it back but yeah usually i just drink espresso with small teaspoon of honey and sometimes with little cold milk just little

@TomsCoffeeCorner 2 года назад

Grinding your own will always be better than buying pre-ground. But, glad to hear that you are getting good results!

@TomsCoffeeCorner 2 года назад

Maybe just watch the milk spinning part a couple of times, and practice yourself. You basically just need the right angle.

@M1960-m5e 3 месяца назад

А весы зачем? Как подставка? Я😂

@tonyvizir198 4 месяца назад

Everything is ok, the coffee looks good, the taste is probably good...but what is the point of spending 14 grams of coffee for one coffee? I worked for many years as a waiter and made coffees, the weight of one coffee is 7 to 8 grams...it is the same on the original handle of the machine in question (dedica) and the coffee is not bad..Too much of everything extra to make one coffee (other handle, second filter, coffee syringe around...) sometimes it just needs to be quick and easy...;)