LML Duramax Turbo Install Part 2

Подписаться 5 тыс.

Просмотров 16 тыс.

50% 1

This is Part 2 of the LML Duramax Turbo install. I pretty much show me swapping all the parts from the old turbo to the new turbo and go over what all I did. This turbo install was not as hard as it should have been just because everything that could be deleted has been deleted on the engine. I also primed the turbo by putting oil in the oil feed and rotating the turbo using an impact driver and a 14 mm socket.
Parts:
Turbo: www.xtremedies....
Gasket set: amzn.to/3PHvS9y

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 47

@aaronminor599 2 года назад

Currently replacing my turbo with a drop in turbo but having problems getting the six manifold bolts off. Did you attack those bolts all from the top?

@operationoverhaul 2 года назад

Yeah I got them all from up top. They are extremely tight especially if the truck has some higher miles. Also a one inch extention and a flex head ratchet works great for this. I also have an air impact that is low profile. Ill get a link for you

@aaronminor599 2 года назад

Thanks for the info. Got turbo out yesterday. New turbo is now just sitting in place but nothing buttoned up. Getting the oil return line connected back with gasket is my new issue. Wishing I paid someone to do this lol.

@wild1athletics 8 месяцев назад

how did the 12pt 12mm uppipe bolts come out? did any snap? im nervous about removing them i really dont want to snap one. I live in California so not much rust but have over 400k miles on the original turbo on the LLY duramax

@operationoverhaul 8 месяцев назад

No I did not break any on this one I believe but I did have one on another that did break off. They were easy to get out though. I just heated up the turbo around the bolts and welded a nut to them.

@wild1athletics 8 месяцев назад

@operationoverhaul Thanks for the quick reply. I'm going to tackle the job soon, just trying to prepare for the worst just in case. Did you have to remove the pedestal or were you able to weld the bolt with it in place? I think I can leave the passenger up-pipe bolts connected at the manifold on the lly so don't have to worry about those.

@operationoverhaul 8 месяцев назад

@@wild1athletics I just removed them when I removed the turbo so they were easy to get

@Emad19728 2 года назад

I want manual service gear box u341e toyota corolla 2013

@simonc8469 8 месяцев назад

The manual calls for dropping the transmission on my 2011. Can it be done without lifting the cab or dropping the transmission? My truck is bone stock low miles just has stuck turbo vanes. I don't have access to a lift so dropping the trans isn't something i can do.

@operationoverhaul 8 месяцев назад

I have done this job on the manually as well and I did not remove the transmission. If I remember checker l correctly I think it calls to remove the transmission on the auto as well. I think it is due to getting the bolts for the up pipes, may be wrong any that but I'm thinking that is the reasoning behind it.

@simonc8469 8 месяцев назад

It's an automatic just meant that the shop manual calls for dropping the transmission. As well can it be done without dropping the transmission with the EGR in place?

@operationoverhaul 8 месяцев назад

@simonc8469 yes you can do it. I have before. It takes a little more stuff to be removed but it can be done.

@logan8256 Год назад

Hey man. What size are the turbo mounting bolts on the bottom of the turbo? I’m about to swap a new oem one in

@operationoverhaul Год назад

On the LML, the mounting bolts are 15 mm

@logan8256 Год назад

@@operationoverhaul appreciate it man. Did you have to do a turbo position relearn or vans sweep after installing your oem turbo? Just read about that and realized I don’t have a scanner lol

@operationoverhaul Год назад

@@logan8256 no i did not have to on this one. I have had to do it on them before but this one did not need it.

@logan8256 Год назад

@@operationoverhaul man I unfortunately rounded off one of the driver side up pipe bolts today. It was super tight, what would you do?

@operationoverhaul Год назад

@@logan8256 I try to use a smaller size and try to snap the head off then if that didn't work I would use a rounded bolt socket first and see if I could get it out and if that doesn't work then try cutting or torching it out but put fire blankets everywhere I could.

@brycepiper938 6 месяцев назад

Is it 100% necessary to remove the drivers side up Pipe

@operationoverhaul 6 месяцев назад

I know some people who have completed this without doing it but they always said that it would have been way easier if they would have pulled it. I have never tried it personally so I would can not say which is easier to do.

@regencyF150 9 месяцев назад

anytrick for the downpipe removal? ive heard its pretty tough

@operationoverhaul 9 месяцев назад

Getting the clamp off isn't that bad but getting the pipe to come off of the turbo is the hard part. I use a pry bar with a striking pad on the handle to knock it off of the turbo. Also, I typically put some Kroil or what ever is your favorite penetrating oil on there as well and let it sit for about an hour before hand.

@azza7090ify Год назад

How long did it take to take off and install just trynna see how much time i need to put aside to do mine.?

@operationoverhaul Год назад

It depends on if the truck is stock or if it is deleted. If you have never performed this job before I would set aside a weekend to complete it and allow for anything that could go wrong. The hardest bolts to me are the up pipe bolts and sometimes getting the down pipe off

@azza7090ify Год назад

@@operationoverhaul yeah mine is deleted and i have installed up pipes and down pipe my self. So as long as im comportable taking all that of i should take a week right?😂

@azza7090ify Год назад

Thanks for the vid👍. Well explained helps alot

@operationoverhaul Год назад

@Zenpiie set aside 3 weeks lol but if you are good with doing all of that the turbo will be pretty straight forward for you. You could knock that out in a day if you stayed on it.

@Joe8ball1 Год назад

Did you have to remove the down pipe ? I can’t get to the 6 exhaust bolts

@operationoverhaul Год назад

Those 6 bolts are pretty tough to reach and they are normally tight as hell too. I did have to remove my down pipe to reach them and it can be in the turbo pretty tight as well. I had to knock mine out with a hammer and drift/punch to get it out of the turbo. I have heated up the down pipe at the turbo before to get it to free up.

@Joe8ball1 Год назад

Thanks ! Wish me luck lol