Locksmiths Go Crazy! Make a Key That Unlocks All Locks 

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Thank you! Cheers!

SAY AFTER ME: LIFE HACK VIDEOS ARE NOT REAL

LIFE HACK VIDEOS ARE NOT REAL@@railgap

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Tens toda a razão, porque também é minha profissão.

1st one was a rake or jiggle key. 2nd is if ur broke n can't go get a copy key real quick lol

Thought he was making a bump key on # 1. It was until after 1st half of making it

It's a 'rake'. A specific type of 'pick'.

yes

Thank you! Cheers!

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Para empezar a robar verdad jejeje seguimiento corporativo por favor.

I'm sorry to hear that the video didn't meet your expectations. I appreciate you bringing this to my attention

Thank you! Cheers!

Para empezar a robar verdad?

Pero te recuerdo también hay policías en las redes y yo podría ser uno de ellos cuidado con lo que escriven y publican siempre abra un seguimiento en TODO.

Thank you! Cheers!

Thank you! Cheers!

Glad you like them!

Thank you! Cheers!

You didn't know it's BS? Why would you upvote this?

Width is 3mm Thickness is 0.5mm

The video's purpose is to help people have more options when they lose their keys

Thank you! Cheers!

🙏🙏

Thank you! Cheers!

Glad you like them!

Thank you for watching

That ratio is not important, I give it a ratio of 1:1

Thank you! Cheers!

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thanks for the visit

Thanks so much for watching our video. Wish you all the best

Thank you! Cheers!

Thank you! Cheers!

Thank you! Cheers!

Thank you for watching

​@@creationholic1011st one you actually made a bump key but turned it into a rake or jiggle key.

Thank you! Cheers!

Thanks

Thanks so much for watching our video. Wish you all the best

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Thank you! Cheers!

Thank you! Cheers!

Glad you like them!

Thanks so much for watching our video. Wish you all the best

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Thank you, wish you a happy and happy new year

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Thank you! Cheers!

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

pero es mas dificil conseguir la hoja de una barredora

Good tip!

Fantastic idea. Great job.

I was doing that exact same thing in the 60's and 70's, then I found feeler gauges worked good too. Those sweeper blades were everywhere back then, now here they use some sort of bristle.

@@MegaRmac Hacksaw blades are also a potential solution, yet elegantly simple and unique.

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Thank you for watching

Thanks so much for watching our video. Wish you all the best

cool story

@@BrandonJones-rd4sm BOT.

Thanks so much for watching our video. Wish you all the best

Thank you for watching

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Thank you for watching

Thank you! Cheers!

Hello! thanks for your recommendation. Wish you all the best!

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

8:08 😅😂❤😅​@@creationholic101

I don't think that picking works on many automobile doors any more. Locksmiths and tow truck operators use other methods for entry.

You are definitely delusional.

Hardware store still copies ordinary keys.

Thank you for watching

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Thank you for watching

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Thank you for watching

sv_cheats_1 sv_cheats_feds_free sv-cheats_unlock_everything

Some great Mcguiver stuff here though!

The first pick I think is called a "rake" Works on more than one lock but not all, so lock picking tool kits usually have several. Takes a certain method and practice skill to use, and some locks cannot be raked open. The "L" shaped tool is used to put a slight torque on the lock cylinder while picking to assist in holding up the lifted pins so they don't fall back (they're under spring pressure ) and/or to just help completely turn the cylinder. Lock picking takes skill, finger sensitivity, and practice.

thank you. i went to the comments just to look for this

Total waste of time and money. Just file a blank to match the original - the blanks are easy enough to obtain.

What's Dynacast in this context? When I looked it up, all I found was golf clubs.

Welcome to Creation Holic channel! Thank you so much for your support

I will research and send it to you when there is a good solution

You can - you have to buy a new padlock with a key.

Thank you! Cheers!

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Thank you! Cheers!

Thank you! Cheers!

Glad you like them!

Thank you! Cheers!

Sorry, I didn’t quite catch that. Can you repeat the question for me please?

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thank you! Cheers!

Welcome to Creation Holic channel! Thank you so much for your support

cyanoacrylate adhesive glue

Or buy a blank on-line and file the blank to match the original.

Thank you! Cheers!

I know! I thought "what the heck?" lol Easier (much easier) to just make a bump key and that's actually a REAL KEY!

Yes, a rather poorly made rake. Rakes and bump keys are used by locksmiths only for insecure locks. If those don't work in a minute or two, they pull out a proper lock pick set. @@MrPocketfullOfSteel

Thank you! Cheers!

it will help you in those emergencies

Thank you! Cheers!

Thank you! Cheers!

He's insulting you @@creationholic101 you fool

😂😂😂Thank you! Cheers!

@@DarthB Probably save some money too. On hot glue, foil tape, WD-40, graphite, baking soda, and super glue.

As is usual for videos like this, they are a bunch of nonsense, or do something simple the hard way. The first pick was just a poorly constructed rake, which was used improperly by the maker. Such a device will NOT open most pin tumbler locks - much less other lock varieties. A locksmith might take a swipe or two with a rake as a first attempt in case the pinning is poor. If that doesn't work within less than a minute, then he/she will pull out proper picks. Interestingly enough, the rake is useless against two of the most simple lock mechanisms, the warded lock and the lever lock. With the graphite/super glue nonsense: the molded key would be very fragile and would break in a stiff lock. He had, the key - just take it to a hardware store or locksmith and get a key cut for a couple of dollars. Or buy a blank from an online source for about a dollar and file the blank to match the original.

Ok, the consensus finds it useless, but imagine: If your key broke in half and the store is closed or you are unable to get there this method with simple basic materials...Keep up the good work!!!😂

There are keys that you cant make copies of. Post office PO BOX keys, Bank Security Boxes, Commercial buildings, etc. They all become a problem if i lose the key. Office building is inconvenient until you get maintenance to get you another one in a day or two, PO BOX it's a $65 dollar replacement fee, if not more, Security box is even worse it's days and over $300 as they have to drill out the lock.

Technically you don't actually need the key in your possession that entire time. You just need the key long enough to make the hot glue mold and then return it without anyone being the wiser. Then you can take your sweet time to replicate it using the method in the video. But a much faster and easier way to achieve the same goal is to simply cut a bar of soap in half and keep it ready with you. Now when you get a hold of the key, just press it really hard into the soap to get a mold (you can also use certain types of clay). This works much faster, especially since you don't need electricity, a hot glue gun or the WD-40....nor do you need to clean the WD-40 from the original key. And since soap/clay has a much higher melting point than hot glue, you can heat up some low-melting point metals like Field's Metal, Bismuth, Alum, Zinc, etc.. and pour it into the soap mold to get a much more durable key copy instead of the brittle superglue/baking soda/graphite mix.

Thank you for watching

Thank you for watching

Welcome to Creation Holic channel! Thank you so much for your support

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best