Logitech G703 no scroll repair for FREE 

Very creative fix! Videos like this make me glad I own a 3D printer.

Thank you for this video! I was able to take apart, diagnose, and fix my G703. Couldn't have done it without this video. I did have to buy the part off Amazon as I don't have friends with a 3d printer, but fixing the problem saved me having to throw out a perfectly good mouse that I do like and enjoy.

I love it when people repair stuff instead of throwing it away just to buy a new one, especially when the repaired thing becomes better than the original one. And this repair makes it better than new. Another technique to repair this if you don't have a 3D printer would be to use a single drop of super glue to re-seat the broken shaft into its correct place and alignment. When the shaft sits in its correct place and the superglue is dry, you can then fill the area around it with Araldite, while being very careful not to knock the broken bit.

Thank you i had the same problem! I Glued the pieces together! You save me 70 bucks :)

I have had mine for about 9 months and I only use my mouse about 45 minutes a day. I like the mouse but the same thing happened to mine. I can look inside of mine in the front and the shaft is broken like yours. I have tried contacting Logitech service support but it is terrible. I would try your fix but just glueing it but my age of 76 just no way because I not have a printer but also my eyes have cataracts and I can’t see to do it and I have arthritis very bad in my fingers. These mice are on sale now for $65 but it’s still much money for a mouse that might break again. My wheel began to get hard to turn the next thing I knew it quit working like yours did. I appreciate your video at least I know maybe not to buy another one. Thank You Very Much and Cheers BTW I subscribed to your channel because of the good job that you did showing and explaining it.

Thanks for the video, it (and long delivery times for replacements!) inspired me to fix mine this morning using a section of an Allen key, which is the now spindle on mine!

Thanks, this worked great! Mine actually snapped at the end so there was no hex shape left. I used the 3D printed part and filed a nylon screw down to the correct shape and length.

you are so good and creative! Thanks a lot!

Great fix, 3D printers help so much. But I wouldn’t of used glue, just in case I needed to print another one in the future ;)

Very inventive fix Kiki, good job👍👍

Not exactly free if you don't have a 3D printer.. lol Nonetheless excellent fix! Thanks for the video!

What I have done is I got some JB weld plastic bonder's glue and put a little in that hole where the little piece broke off. Then put the wheel back it place and hold it up to my Air Conditioner so it could harden and it work fine.

Great job 👏 👍 and here to help get your videos 📹 out to everyone 😀 👏 👍

Funny that I found this video after just fixing my mouse, I had the exact same issue, after having my mouse drop. I just glued it on, will see how long it lasts. Maybe will post a reply after it breaks again to give an idea how long that lasts.

Broke the same part and fixed it with burning the plastic parts back together with a lighter :D Seem to work as a temporary soution as im waiting for a replacement scroll wheel. Hope it helps someone

Genius fix :)

Mine was feeling rough for about 10 turns, then it was freewheeling, darn, didn't have it that long either, fark...

It would have been helpful to share the 3D Print file you used

Who needs a 3d printer when you have a glue gun and will power

hi i have the same broplim but how can i find the same iteam u used and whats is name

Hi I did this and put everything together and it worked for my scroll wheel, but now when I right/left click nothing happens on my computer screen im wondering if I messed up reconnecting the shell to the bottom /battery

Two component glue is ok also

kinda lucky that your broke on the wheel base side, mine broke right inside of the encoder

I have the same exact problem but I don't have a 3d printer

selling any of those printet support brackets ? :) and yes my g703 is doing the same thing hehe

I just fixed the issue with this video but broke off the ribbon cable holder while opening the mouse so yay scroll wheel but no clicks or leds bruh

Hi, I have an issue with the left click on the mouse-logitech g703 lightspeed. When I press the left click and hold, I cant press a little harder or tilt my finger a little bit... as I press it, I must hold it 100% the same or it will stop holding... do u know why do I have that issue and how can I fix it?

I can feel the encoder when I turn my mouse wheel, so I'm pretty sure that is not my issue...

Hi guys, anyone with problems on the left click button? Randomly stop receiving the clicking while pressing it... thks

my Logitech G703 scroll wheel have the same problem.. the wheel suddenly click and become free wheeling and it doesnt scroll..you should put the 3D print file online so other people who come here can print from your file

hey man, can you share the printing file?

hello i emailed you about the piece just now could you make sure the file is an .stl

What is it its from lego ?

i 3d printed it and it is too small for the broken peice and too big to fit in the scroll wheel. help?

Where can i get the print file?

I've just glued shaft to the scroll wheel with cyanoacrylate

No 3D printer. Just going to try and eyeball it and glue it. AAAnd its awful. Guess I just need a new one.

15 min u could do it in 3 min max !!

This is not for free man.

3d printing plays havoc with logitech sales methods... Logitech!