Longer Laser B1 20w - High features with a Low price!

Подписаться 17 тыс.

Просмотров 3,9 тыс.

50% 1

‪@Longerofficial‬ is well known for its 3D printers and has had the Ray5 series of lasers out for a while. But they came out swinging with the B1 series of lasers. They were kind enough to send me the 20w version of this new laser to test out, and I'll let you know where they hit the mark and where there were a few misses with this laser. Overall, it's got quite a few excellent features while keeping a very competitive price!
Watch my unboxing and assembly video of the Longer B1 20w here: • Assembling the Longer ...
To learn more about this laser and to order your own, check out the affiliate link below. Using this link does provide a small kickback to this channel, and we thank you for using it.
amzn.to/3TXFQZo
Follow me on Instagram and Facebook for behind-the-scenes on what is happening in my workshop!
/ vintauri
/ vintaurisworkshop
Join the community group on Facebook here: / 1539720113203305
Support the channel by using the links below:
vintaurisworks...
www.amazon.com...
www.xtool.com/...
atezr.com?source_type=sales_plugin_af&slt=sales_plugin_af&referral_code=6M9JSZORGMSC&SI&Affiliate&Steve-Mills
#longerlaserb1 #laserengraver #laserengravingmachine #longer3d

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@DVOMarineDesign 6 месяцев назад

Thanks for this complete review. You've provided good informations and fix! Thank you again.

@jeffteeter501 Год назад

I might try that tape over my nozzle. Thanks for the tip.

@Vintauri Год назад

If you feel like you are not getting good airflow at the nozzle it's something to try. Just be careful of any flareups and catching the tape on fire if you set your nozzle too close to the material and move too slow.

@SteveMakesEverything Год назад

Hi Steve. Great review - you explained the air assist issue very clearly and made a great laser better. You hit all of the points I found plus more - especially the glossy light shield. Thanks for the cross-linkage to my video - hopefully, we can do more cooperations like this.😀

@Vintauri Год назад

As you found in your review, there were a few areas to shore up, but overall it's a nice laser. I'm happy to send people to good information like yours and I welcome any chance we get to collaborate on projects!

@gordonduke8812 Год назад

Thanks for the Driver Fix.

@Vintauri Год назад

I'm glad it's helping!

@TheClackShack Год назад

That air assist fix is kinda redneck…. Welcome to the club… We use duct tape to fix anything.

@Vintauri Год назад

Sometimes the simple fixes are the best ones!

@gonzales2011 8 месяцев назад

I don't really want to buy a product that doesn't work as intended from the get-go. Do you know if they fixed the nozzle issue ?

@TheClackShack 8 месяцев назад

@@gonzales2011 The newer machines have a smaller hole from what I have heard.

@jewijk Год назад

Nice review, seems like a capable machine.

@Vintauri Год назад

It really is a nice machine for the money. If you really want a cutting beast I would check out the 30w version!

@denisfm89 8 месяцев назад

What is compatible rotary roller for this model?

@Jeff1Jeff2Jeff3Jeff Год назад

Hi Steve .. I gave your tape-trick a try, and it seems like a great idea .. the weird detail I noticed was that my laser poked a hole through the tape "right up against" the nozzle wall ... very off-center .. I was really surprised. Does this seem 'normal'? OLM3 10w ... thanks!!

@Vintauri Год назад

That is a little surprising. If it was a CO2 laser I'd suggest adjusting your final mirror. But in this case there is not really anything you can adjust.

@DimitriosAggelo 10 месяцев назад

Hello, very nice video. Can you tell me if the lens can be changed in this laser?

@Vintauri 10 месяцев назад

Yes it has a cover lens that you can swap out, but the inner focus lens is not something I'd look to change or replace.

@jacklinmuniz9377 11 месяцев назад

Hi I bought one and it started perfect then it is now giving me problems ,I don't want to return it and getting support is not easy 😢 can you help me?

@Vintauri 11 месяцев назад

It could be hard to troubleshoot it via the comments, but we have a facebook group where people share ideas as well as issues where we try to solve problems. facebook.com/groups/laserengravingcommunity

@jppalm3944 Год назад

So it wasn't tested at factory. That problem is really basic test

@Vintauri Год назад

There were a couple of hiccups in this unit, and it was a pre-release one so hopefully in production the bugs are worked out. However if people run into them, I wanted them to know the fix. Overall once it's set up correctly, it's a decent laser in this price range.