Longer Ray 5 20W Laser Engraver - The Hobby Machine that Pass the Professional Mark

Подписаться 7 тыс.

Просмотров 7 тыс.

50% 1

In this video, I will show the new Longer Ray 5 20W, I will show you its capabilities, what I liked and what I didn't, and ultimately I will tell you whether you should consider it or not.
For specs and purchases of Longer Ray 5 click the following links:
Longer ray 5 with 20W module: s.zbanx.com/r/dcdCBOF9094g
Longer 20W Module only: s.zbanx.com/r/gmZM7BaF5YCI
Air Pump: s.zbanx.com/r/155ktBZhw0vC
Enclosure: s.zbanx.com/r/8dOY0IYeyj5U
Longer ray 5 with 5W module: s.zbanx.com/r/fP8oGK09rxvS
Longer ray 5 with 10W module: s.zbanx.com/r/OeP4xTeKID3N
10W Laser Module: s.zbanx.com/r/9YrVL9XTZYM3
Clamping Magnets
s.click.aliexpress.com/e/_Dd0...
My Blog, where you can find content related to Laser Machines and Engravings as well as free 3d accessories, testing templates and projects for your laser engraver :
middleroomworkshop.com
Try my G-code Unit Converter
middleroomworkshop.com/g-code...
Machines:
Latest Laser Engraver and 3D Printer Offers affiliate.geekbuying.com/gkba...
Atomstack
Official - All machines
P7 & P9 s.click.aliexpress.com/e/_DCr...
A5 s.click.aliexpress.com/e/_DeE...
A10 s.click.aliexpress.com/e/_Dml...
X20 s.click.aliexpress.com/e/_Dd0...
X30 33W Laser s.click.aliexpress.com/e/_DDP...
Amazon
amzn.to/3OqnGLF
amzn.to/3ERIQiY
amzn.to/3OrnZG0
Aufero & Ortur
Laser 1 s.zbanx.com/r/7ONL70JFNkci
Laser 2 s.zbanx.com/r/8BshexpB5gsN
Laser Master 2 Pro s.click.aliexpress.com/e/_DkA...
Laser Master 3 s.click.aliexpress.com/e/_DDk...
LU2-4-SFLaser module s.zbanx.com/r/tnuGpccNPxBi
LU2-4-LF Laser module s.zbanx.com/r/QOp6rfiVguw6
Amazon
amzn.to/3TVw9rz
amzn.to/3tQfA5Q
NEJE
Official - All Machines shareasale.com/u.cfm?d=886868...
NEJE 3 PRO s.click.aliexpress.com/e/_9waC1r
NEJE 3 MAX s.click.aliexpress.com/e/_9ynf3X
NEJE 4 Max s.click.aliexpress.com/e/_DFM...
NEJE 4 Max s.click.aliexpress.com/e/_Dkt...
Amazon
amzn.to/3AA5cTj
XTOOL
Official - All Machines
EU: eu.xtool.com/?ref=MRW&...
USA: www.xtool.com/?ref=MRW&...
D1 amzn.to/3ERfAIM
D1 PRO amzn.to/3AA5cTj
XTOOL RA2 PRO Rotary amzn.to/3AyWiFB
Xtool P2 CO2 Laser www.xtool.eu/pages/xtool-p2?r...
Longer Ray 5W, 10W & 20W
s.click.aliexpress.com/e/_Dej...
s.click.aliexpress.com/e/_DDl...
20W Laser Module: s.click.aliexpress.com/e/_DBI...
Amazon
amzn.to/3TSZCSL
amzn.to/3OsnYC4
Other Brands
Comgo Z1 s.zbanx.com/r/369OUFEJ2Tun
Atezr P20 Plus amzn.to/3UWSTIV
LaserPecker 2
s.click.aliexpress.com/e/_Dd6...
amzn.to/3VjRWKJ
OMTech CO2 Laser amzn.to/3Vd053p
Sculpfun S9 amzn.to/3ERfAIM
K40 CO2 Laser s.click.aliexpress.com/e/_DmW...
Accessory:
Ortur Rotary Roller s.zbanx.com/r/KEvEr5qpnB6X
Offline Controller s.zbanx.com/r/H7Qfwt9eiJO3
Aufero Laser Height Adjustment s.zbanx.com/r/tl634XxCxKsg
XTOOL RA2 PRO Roller s.click.aliexpress.com/e/_DlL...
Atomstack Roller: s.click.aliexpress.com/e/_DeM...
Atomstack Extension: s.click.aliexpress.com/e/_DBA...
Atomstack Maker F3 Cuttig Board: www.geekbuying.com/go/7c2bkG6M
Cheap Laser Cams :
s.click.aliexpress.com/e/_Dkb...
s.click.aliexpress.com/e/_DBo...
s.click.aliexpress.com/e/_DFB...
s.click.aliexpress.com/e/_Def...
Safety Glasses: www.xtool.eu/collections/acce...
See Also:
Regain lost power with your laser module
• How to regain Power in...
Setup Stubborn Laser Engravers
• Setup Stubborn Laser E...
Cutting acrylic with your Laser Engraver
• Cutting Acrylic with y...
Atomstack P9 initial thought and setup - Should you buy it?
• Atomstack P9 - Initial...
Engrave Projects bigger than your engraving machine
• Engrave and Cut Projec...
LaserGRBL In-Depth Tutorial
• LaserGRBL In Depth Tut...
What is Kerf? How to Find the Fit tolerance for a perfect Joint
• Find the perfect Fit T...
How to cut Leather
• Can you Cut Leather wi...
Can you engrave Metals?
• Can you Engrave Metals...
Timestamp
00:00 Start
01:02 Intro
03:28 Longer's Air Pump
04:06 Capabilities
08:25 Pros & Cons
10:47 To Improve or Add
11:05 Cons - What I don't Like
12:03 Conclusions
Thanks for watching

Наука

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@DilyanaDobreva Год назад

Wow, I like that machine! Thank you for your videos. Helpful as always 👍❤

@dragonshoarddesign3094 6 месяцев назад

I just ordered the promax kit where do I get the calibration charts

@Baofengs 2 месяца назад

Спасибо за обзор. В России не нашел видео)

@gl7038 9 месяцев назад

I didn’t get the air pup nor the cable that’s on the side of the fan. And I don’t understand how it’s supposed to cut. Mine doesn’t

@vitoangiletti1564 Год назад

Thank you for your video. I am looking to buy a machine for a small businness and i will definitely consider this one. Can I cut 5mm plywood with it?

@MiddleRoomWorkshop Год назад

Hi, vitoangiletti1564; thank you for your comment. You can definitely use the machine for a small business/hobby. Regarding your question, yes, you can cut 5mm plywood, but you will need to slow down the machine for that. I hope it helps, and good luck with your business. Ciao

@jackconnolly4567 11 месяцев назад

Hi..thank you for the review. Which power magnet works best ? KND 16 or KND 20, or more ?

@MiddleRoomWorkshop 11 месяцев назад

Hi, @jackconnolly4567, thank you for your comment. I got the KND 25, 32 and 36 with me, and they all pass under the machine and have a pretty strong holding power. If you wonder between 16 and 20, I'd for the 20. I hope it helps. Ciao

@MICHELDANGAIN 5 месяцев назад

Hello, thank you for this video. I have a little question. I have the LONGER RAY5 20w, I know that it is designed to go up to 10000mm/minute, but I have a problem, I have the impression that between 6000 and 10000, I don't see any difference of speed. Is there an adjustment to be made? I should point out that I precisely compared to 6000 and 10000, the time is identical... THANK YOU FOR YOUR HELP

@MiddleRoomWorkshop 5 месяцев назад

Hi, thank you for your comment. The machines (in general not only longer) do adjust the execution speed based on the project, but the amount of data streamed and its mechanical and thermal limitations. For example, if you have some diether engraving with many points the buffer memory may get clustered, and the machine tries to cope with it by slowing down and reducing the power output, a similar can happen for long projects. Alternatively, if you are engraving thin details the machine needs to switch from accelerating, constant speed, slowing and reversal very rapidly, this can affect the resulting engraving negatively, therefore the engraver may decide again to slow down, in this particular example you can increase the over scanning length so that the laser has a longer distance to do the acceleration and reversal. I hope it helps.

@MICHELDANGAIN 5 месяцев назад

Tank You@@MiddleRoomWorkshop

@717WoodworksOnline 3 месяца назад

I've never used a laser engraver but I'm looking into it now because I've started making custom cutting boards, serving trays, charcuterie boards, cheese slicer boards, etc and I'd like to engrave my logo into each piece.. I just don't know what power machine I would need for that.. Is 5W enough since I won't be cutting anything? Or should I go ahead and get something like this 20W machine? I'd appreciate any input you can give me.. Thanks!!

@MiddleRoomWorkshop 2 месяца назад

Hi, thank you for your comment. A logo in your products will definitely make them stand out. You could get away with the 5W models, but you will be stacked to lower speeds. Dont know what your production volume is, and the type of logo, but a 10W in my opinion would be better while still retaining that tiny fine laser spot. 20W is instead a perfect power spot for both cutting and engraving as the spot is still relatively fine. I hope it helps. Ciao

@XristinaKoutoupa 5 месяцев назад

Hello friend! Nice video! I have the same machine and I want to ask you if I can cut gold mirrored acrylic 3mm. I would appreciate your help!

@MiddleRoomWorkshop 5 месяцев назад

Hi, thank you for your comment. You can cut the acrylic you are mentiining as long as it's not semitransparent. That is if the sheet is semitransarent with a foil on top, you will only be able to effect the surface. Make sure it is all mat and no light passes through. I hope it helps. Ciao

@stratosmalakos3535 6 месяцев назад

Hello my friend I have this the exact same laser cut machine. I have a problem with my air pump it does not work properly. In fact when it is turned on it cuts much more messier.... What do I do wrong???

@MiddleRoomWorkshop 6 месяцев назад

Hi, thank you for your comment. What do you mean by messier? Wavy, Smoked? I can't really give you a hint without a more accurate description of the "messier". Yet, few points to check: - Make sure that the compressor does not vibrate the machine while in operation. - Make sure that the compressor does not suck in smoke, otherwise it sends smoke. Let me know so I can give you some more hints. Ciao

@melly7886 2 месяца назад

Hello I cant seem to access your blog for the test files for a longer ray5 20w.would u be able to share them please? It says 403 error

@MiddleRoomWorkshop 2 месяца назад

Hi, thank you for your comment. I am sorry for the inconvenience. Unfortunately, I found that my site was down, but now is back online. Ciao

@bobsyouruncle8052 7 месяцев назад

bought one in october had it a month laser went out would buy a better brand

@MiddleRoomWorkshop 6 месяцев назад

Hi, thank you for your comment. I guess you got a faulty product, this is something that can happen with any brand. I have used the 20W version from the video for months with hundreds of products and about 1000hr and had no problems with the laser module. I hope it helps. Ciao