i struggled with the issues of settings but i have managed to figure it out. im using lightburn 1.6 just for reference. in rotary set up: choose roller enable rotary mirror output to rotary ( you could mirror the image as you go but this saves the potential mistake later on not doing so) on y axis: set mm per rotation to 56.52mm set roller diameter to 18mm you dont have to input object diameter, only needed for chuck rotary. physically measure and make sure your image will fit within the surface space provided. tried settings following the video and had the issue of stretching. using the above settings fixed that for me. hopefully a help for someone else searching endlessly.
Well, nobody helped me so I’ll help whoever might be watching this and is getting confused like I did. The B1 access is not on top. That is the X you need to plug the rotary into the lower left of the frame. That’s where the YXS motor is.
@@SmitHVAC. Understood. Let me take you through my steps here. Machine off>plug in the extension for the rotary>machine on>enable rotary>hit "test" and I get a soft limit warning.
@@autorepairbymike1356 that's interesting. Manually move the laser to the location you want it in, then hit the position button on the lasers display. It should set its home position.
