LONGTUBE HEADERS ON THE CAMMED SILVERADO 5.3L SOUNDS LIKE A NASCAR!!! 

“Hear that chop better” truck proceeds to have no chop to be found.

Hell yea bro you inspire me to get another truck and make it a race truck, love the progress on the build so far

Take it out of 1st gear sometimes lol.

Lol those sparks from when you took out the dipstick is exactly why you should disconnect the battery 😂😂😂

Headers should free up power if you had a lot more exhaust. But it makes it sound better and look better. It’s all part of it! Awesome truck. It needs LS ported heads and upgraded injectors and pump. Time for the big money mods!!!

Thank you so very much for taking your time to make this video, makes me feel a lot better about making the purchase and hella thank you for the 15% off promo code!! I like your truck, it's really nice. It is my hope that you and your family are in good health and staying Covid free.

13:54 love that cruise pov can you do more with same filter just love the whole view and sound

True duals I'm going straight back

Sounds great, looks awesome. Nice job.

Another banger video. Would love a video of you taking it to your local drag strip and see what it runs

I had shorty headers on my cammed 5.3 cateye just like that and 😮‍💨 it sounded so good man like a vette growl

was there a noticeable power difference? and do you think other long tubes would provide more performance or these are the best bang for your buck?

Yeah. I'll bet your neighbors love you.

Sounds good and looks good and about 20 ture horsepower on headers

I be blipping my throttle like that everyday 😂😂😂. Chevy gang

yea i gotta step in the truck lane that thing look and sounds goods 🔥🔥

That mf arked HARD 💀 when you pulled the dipstick tube out

I can’t be watching videos like this man I’m trynna save money 😭

Truck is beautiful

the build going fire asf congrats brotha

Love that truck!!!!

Sounds a lot better

Perfect look man! Congrats. What wheel/tire combo are you running? I have an 06 crew cab

I’m in the process of building a 5.7. Vortec 350 but carbureted for my 05 silverado

Awesome 👏 👍 from 956 South Texas

🔥 as usual bro, but those gaskets that come with the headers are trash. Over a few months the headers will burn through them and cause a leak. You have to use OEM manifold gaskets because they’re MLS

Hey man side note what mic are you using clipped onto your shirt? Sound quality is great 👍🏾

I just got done with short tubes on my tahoe, I've been plannin on upgrading to e fans as well as the same aluminum radiator, but would you recommend a stage 2 cam? I would've liked a stage 3 but I already average like 12mpg city, 8mpg with e85, and don't wanna have to deal with changing the stall converter as well

Speed engineering 1 7/8 header long tubes I on my 00 suburban no love taps needed. Didn't even take out the spark plugs surprisingly But love taps add a little power 🤣🤣 I need those wheels!

Nice truck!!

Just to be correct, you took off the exhaust manifolds. Nice truck, what transmission are you usung?

Nice bro I’m installing a 5.3 in my 2000 Chevy Silverado 1500 short bed will I still need to get my truck tuned after installing

Que convertidor traes en la transmisión? Te va quedando chingona

Great video. From a 1-10 scale how difficult is it to DIY this type of job myself? I have little knowledge of mechanics . I have a 2012 silverado 5.3

On the downsteem o2 sensors, did you just ziptie the wires back or does this kit have a spot for all four O2 sensors?

Take a shot everytime he says. There you have it. Everyone will be fooked upppp 😂

Hey man I ran them jdmspeed wires but they only lasted 3 months and started misfiring get the MSD wires when u can bro don’t wanna ruin that motor. Truck is badass to

Nice video bro I’m installing a 5.3 in my 2000 Chevy Silverado pickup short bed we’re do I find that exhaust set up bro pl help

HE GOT THE LONGTUBES

What’s the part number to those mufflers bro? Sounds killer 🔥

Yo tengo una Chevy con un 6.0 tiene stage 4 btr car cam FIC 365 injectors 3600 stall and a FTI transmission cooler long headers how much horsepower you think she’s going to give I am new on this game

If and when you ever come to Florida. Hit me up. I’m down for some truck racing.

I like it

se ve bien wey 🔥🔥

fire

Hey I have a 2000 single cab Silverado but it’s 4wd, I was wondering if these fit on it since it’s 2wd I want to purchase them off the site you got them. Also do I need an egr delete for this? You inspired me to finally get long tube headers with this vid thanks man 🔥

Im also supercharged with the magnuson and i put shorty headers but i like the way yours sound better with the long tubes im probably losing hp right?

When installing these headers what is the wire kit it comes with for and those conectors

Besides the cam what else do you have done to the engine? New to your chanel

Sounds exactly like the muscle cars in gta 5

I noticed your trans crossmember was modified and don’t have that bigo chunk in the bottom it sits flush with the frame y’all did that or bought it like that ? Only asked cause they do that when they hella low and don’t wanna bend the oem crossmember.

what size are the headers 1.3/4 or 1.7/8??

Did you notice a difference with these headers and are they a good quality set? And how are they holding up now? Thinking about doing these headers I just seen there a little on the cheaper side

Yeah the stock header def choking the exhaust but so are those “love taps” you put in the brand new header 😂

Clean truck. No CAI with headers and cam? Always take out the plugs just to avoid breaking them, but you live and learn. Sounds good too

In your video you said something about misfire. Would these headers cause that or check engine light to come on just wondering before I buy them for my truck

Maybe I missed it but what about the rear o2 sensors on the new exhaust?

What’s your muffler setup?

Is the black coating holding up? These seem like the best bang for the buck mod on these trucks

Texas speed makes some good ones

Your crossmember is stock or did u get that modified to fit

Did you have to move the brake lines and transmission lines or naw

Why do you prefer the stock airbox intake ? Genuinely curious?

Change those out for ceramic coated ones my boy. The painted rust real bad

Esta perrona bro cual es nombre de los spark, plug wires

I need long tubes on my Yukon

I saw sparks when u remove oil dipstick?

Vid says Los Angeles, how the hell are you smogging it? BOught my 02 LS new in Northridge...finished a 2 yr frame off resto on it stolen 2 mos later. A hole theives, been so hard not to come through their front door.

Yo what’s the part number for the headers?

Bitch is clean sounds good thanks for all the info

I'm getting some long tube . What about the egr delete?

I know I asked this already but what does the o2 sensor help do if you have no cats...

Does every header order come with clamps ?

what wheels are those? and what sizes on each brother?

are these painted or powder coated? their website doesn’t specify.

Can i use those type headers here in California or are they illegal and do i need to tune it after install

What size this headers?

How you do your exhaust bezel out front of back tire?

Bro what did you mean at 4:35 when you took them off

Did new bolts come included?

Disconnect the battery before you even begin anything.. your computer will do a little soft relearn and comprehend better with the AFR, you still need a tune but it’s better than just cranking it on and relearning while your driving without disconnecting the battery beforehand.

Sometimes Longtube headers aren't worth the hassle especially for LS Swaps. It shows how good Flasharkracing is on there fabrication and jig for you having to beat them into fitment... Ball dropped there. They look just like your basic China Longtube headers. I'm going with a more reputable company like Summit... I'm honestly more surprised the Cops in Calli doesn't impound your truck and crush it since they are hell bent on stopping vehicle modifications. Nice vid though...

se escucha perraa🔥👌

does the y pipe come with a spot to install the bottom o2 sensors

Will these headers work for a 5.3 AWD Cateye ?

What is the size are the headers? 1 7/8 or 1 3/4?

What engine bay cover do you have

can someone pls tell me what year this truck is!?!?!

Hello can you tell me what year your truck is

We're gonna need a more aggressive cam

When the turbo coming?😮‍💨

that's pretty much Mann

Needs a better tuner… that will give you more “chop” and fix your start up issues if it’s not mechanical

How you make it pop??

bro kept saying “we” the other dude was doing mostly everything 😭💀

Long tubes gain more like 7-8 horse without retuning. Tops is 15 probably

What muffler do you have?

I bet the drone at 1800 rpm’s is deafening. My 5.3 has 1 7/8 headers long tube with 3 in all the way back. It was stupid loud and had to add 24 inch resonators and dynomax mufflers to keep my hearing at 1800 rpm’s doing 70-75. My wife won’t ride with me still.

what kinda cam you got man?

😊😊